From mboxrd@z Thu Jan  1 00:00:00 1970
From: sshtylyov@mvista.com (Sergei Shtylyov)
Date: Fri, 11 Feb 2011 21:45:35 +0300
Subject: [PATCH v2 06/13] da850: pruss CAN board specific additions.
In-Reply-To: <1297435892-28278-7-git-send-email-subhasish@mistralsolutions.com>
References: <1297435892-28278-1-git-send-email-subhasish@mistralsolutions.com>
	<1297435892-28278-7-git-send-email-subhasish@mistralsolutions.com>
Message-ID: <4D5583CF.8010905@mvista.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Subhasish Ghosh wrote:

> This patch adds the pruss CAN pin mux and registers the device
> with the pruss mfd driver.

> Signed-off-by: Subhasish Ghosh <subhasish@mistralsolutions.com>
[...]

> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index 242d1ed..2ce5536 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -1053,8 +1053,43 @@ static __init int da850_evm_init_cpufreq(void)
[...]
>  static struct da8xx_pruss_devices pruss_devices[] = {
> -	{.dev_name = NULL,},
> +	{
> +		.dev_name	= "da8xx_pruss_can",
> +		.pdata		= &can_data,
> +		.pdata_size	= sizeof(can_data),
> +		.setup		= da850_evm_setup_pruss_can,
> +	},
> +	{
> +		.dev_name	= NULL,
> +	},

    No need to explicitly initialize to NULL.

WBR, Sergei