From: b-cousson@ti.com (Cousson, Benoit)
To: linux-arm-kernel@lists.infradead.org
Subject: [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG
Date: Fri, 18 Feb 2011 17:50:50 +0100 [thread overview]
Message-ID: <4D5EA36A.4000903@ti.com> (raw)
In-Reply-To: <20110218154135.GF11151@legolas.emea.dhcp.ti.com>
On 2/18/2011 4:41 PM, Balbi, Felipe wrote:
> Hi all,
>
> On Fri, Feb 18, 2011 at 03:11:11PM +0100, Cousson, Benoit wrote:
>> On 2/17/2011 7:18 PM, Tony Lindgren wrote:
>>> * Cousson, Benoit<b-cousson@ti.com> [110217 09:45]:
>>>>
>>>> Done, boot tested, and that does remove the warning about the
>>>> missing opt clock you had with the previous data.
>>>>
>>>> git://gitorious.org/omap-pm/linux.git for_2.6.39/omap4_hwmod_data
>>>>
>>>> Just let me know if it does break anything else.
>>>
>>> Pulled into omap-for-linus. Also now merged are the devel-hwspinlock
>>> and devel-mcspi branches.
>>
>> McSPI OMAP4 hwmod data are missing a couple of flags that break the boot for the moment.
>>
>> Govindraj should rebase on the omap4_hwmod_data branch and add the missing rev and dev_attr for the McSPI.
>>
>> Unfortunately, even with that patch omap-for-linus boot hangs after the following trace:
>>
>> [ 0.875091] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517
>> [ 0.886657] usbcore: registered new interface driver usbfs
>> [ 0.892822] usbcore: registered new interface driver hub
>> [ 0.898681] usbcore: registered new device driver usb
>> [ 0.904815] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
>
> I tested your branch merged with mine and it was working fine. What else
> is on omap-for-linus ? There are only 28 patches on that branch, a
> bisect would be quick ?
This patch is at least fixing the McSPI crash. I still don't have a clue
about the final hang :-(
Benoit
---
From b2190f0d339c9d843eb5e370d0db8b7090fbcfab Mon Sep 17 00:00:00 2001
From: Benoit Cousson <b-cousson@ti.com>
Date: Fri, 18 Feb 2011 14:01:06 +0100
Subject: [PATCH] OMAP4: hwmod data: Add rev and dev_attr fields in McSPI
- Add a rev attribute to identify various McSPI IP version.
- Add a dev_attr structure to provide the number of chipselect
supported by the instance.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Govindraj.R <govindraj.raja@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 26
++++++++++++++++++++++++++
1 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 84e795c..182aa79 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -24,6 +24,7 @@
#include <plat/cpu.h>
#include <plat/gpio.h>
#include <plat/dma.h>
+#include <plat/mcspi.h>
#include "omap_hwmod_common_data.h"
@@ -3114,6 +3115,7 @@ static struct omap_hwmod_class_sysconfig
omap44xx_mcspi_sysc = {
static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = {
.name = "mcspi",
.sysc = &omap44xx_mcspi_sysc,
+ .rev = OMAP4_MCSPI_REV,
};
/* mcspi1 */
@@ -3156,6 +3158,11 @@ static struct omap_hwmod_ocp_if
*omap44xx_mcspi1_slaves[] = {
&omap44xx_l4_per__mcspi1,
};
+/* mcspi1 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
+ .num_chipselect = 4,
+};
+
static struct omap_hwmod omap44xx_mcspi1_hwmod = {
.name = "mcspi1",
.class = &omap44xx_mcspi_hwmod_class,
@@ -3169,6 +3176,7 @@ static struct omap_hwmod omap44xx_mcspi1_hwmod = {
.clkctrl_reg = OMAP4430_CM_L4PER_MCSPI1_CLKCTRL,
},
},
+ .dev_attr = &mcspi1_dev_attr,
.slaves = omap44xx_mcspi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -3210,6 +3218,11 @@ static struct omap_hwmod_ocp_if
*omap44xx_mcspi2_slaves[] = {
&omap44xx_l4_per__mcspi2,
};
+/* mcspi2 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
+ .num_chipselect = 2,
+};
+
static struct omap_hwmod omap44xx_mcspi2_hwmod = {
.name = "mcspi2",
.class = &omap44xx_mcspi_hwmod_class,
@@ -3223,6 +3236,7 @@ static struct omap_hwmod omap44xx_mcspi2_hwmod = {
.clkctrl_reg = OMAP4430_CM_L4PER_MCSPI2_CLKCTRL,
},
},
+ .dev_attr = &mcspi2_dev_attr,
.slaves = omap44xx_mcspi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -3264,6 +3278,11 @@ static struct omap_hwmod_ocp_if
*omap44xx_mcspi3_slaves[] = {
&omap44xx_l4_per__mcspi3,
};
+/* mcspi3 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
+ .num_chipselect = 2,
+};
+
static struct omap_hwmod omap44xx_mcspi3_hwmod = {
.name = "mcspi3",
.class = &omap44xx_mcspi_hwmod_class,
@@ -3277,6 +3296,7 @@ static struct omap_hwmod omap44xx_mcspi3_hwmod = {
.clkctrl_reg = OMAP4430_CM_L4PER_MCSPI3_CLKCTRL,
},
},
+ .dev_attr = &mcspi3_dev_attr,
.slaves = omap44xx_mcspi3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -3316,6 +3336,11 @@ static struct omap_hwmod_ocp_if
*omap44xx_mcspi4_slaves[] = {
&omap44xx_l4_per__mcspi4,
};
+/* mcspi4 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
+ .num_chipselect = 1,
+};
+
static struct omap_hwmod omap44xx_mcspi4_hwmod = {
.name = "mcspi4",
.class = &omap44xx_mcspi_hwmod_class,
@@ -3329,6 +3354,7 @@ static struct omap_hwmod omap44xx_mcspi4_hwmod = {
.clkctrl_reg = OMAP4430_CM_L4PER_MCSPI4_CLKCTRL,
},
},
+ .dev_attr = &mcspi4_dev_attr,
.slaves = omap44xx_mcspi4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
--
1.7.0.4
next prev parent reply other threads:[~2011-02-18 16:50 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-17 12:40 [patch-v2.6.39 0/7] Patches for next merge window Felipe Balbi
2011-02-17 12:41 ` [patch-v2.6.39 1/7] arm: omap4: usb: explicitly configure MUSB pads Felipe Balbi
2011-02-17 12:41 ` [patch-v2.6.39 2/7] arm: omap4: 4430sdp: drop ehci support Felipe Balbi
2011-02-17 12:41 ` [patch-v2.6.39 3/7] OMAP2430: hwmod data: Add USBOTG Felipe Balbi
2011-02-17 12:41 ` [patch-v2.6.39 4/7] OMAP3xxx: " Felipe Balbi
2011-02-17 12:41 ` [patch-v2.6.39 5/7] AM35xx: " Felipe Balbi
2011-02-18 11:29 ` Premi, Sanjeev
2011-02-18 13:07 ` Hema Kalliguddi
2011-02-18 13:31 ` Premi, Sanjeev
2011-02-17 12:41 ` [patch-v2.6.39 6/7] OMAP4430: hwmod data: Adding USBOTG Felipe Balbi
2011-02-17 13:43 ` Cousson, Benoit
2011-02-17 14:07 ` Hema Kalliguddi
2011-02-17 15:15 ` Felipe Balbi
2011-02-17 15:18 ` Felipe Balbi
2011-02-17 15:21 ` Cousson, Benoit
2011-02-17 15:26 ` Felipe Balbi
2011-02-17 15:54 ` Cousson, Benoit
2011-02-17 16:20 ` Tony Lindgren
2011-02-17 16:22 ` Felipe Balbi
2011-02-17 16:59 ` Tony Lindgren
2011-02-17 17:14 ` Cousson, Benoit
2011-02-17 17:17 ` Felipe Balbi
2011-02-17 17:17 ` Felipe Balbi
2011-02-17 17:24 ` Cousson, Benoit
2011-02-17 17:37 ` Felipe Balbi
2011-02-17 17:46 ` Cousson, Benoit
2011-02-17 17:52 ` Felipe Balbi
2011-02-17 18:01 ` Felipe Balbi
2011-02-17 18:18 ` Tony Lindgren
2011-02-17 19:08 ` Felipe Balbi
2011-02-17 21:16 ` Tony Lindgren
2011-02-18 14:11 ` Cousson, Benoit
2011-02-18 15:41 ` Felipe Balbi
2011-02-18 15:55 ` Cousson, Benoit
2011-02-18 16:50 ` Cousson, Benoit [this message]
2011-02-21 18:22 ` Tony Lindgren
2011-02-21 21:36 ` Cousson, Benoit
2011-02-21 22:08 ` Tony Lindgren
2011-02-21 22:53 ` Cousson, Benoit
2011-02-21 23:09 ` Tony Lindgren
2011-02-21 23:28 ` Russell King - ARM Linux
2011-02-22 18:27 ` Paul Walmsley
2011-02-17 16:21 ` Tony Lindgren
2011-02-17 16:31 ` Felipe Balbi
2011-02-17 12:41 ` [patch-v2.6.39 7/7] OMAP2+: musb: hwmod adaptation for musb registration Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D5EA36A.4000903@ti.com \
--to=b-cousson@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).