From mboxrd@z Thu Jan  1 00:00:00 1970
From: andy@warmcat.com (Andy Green)
Date: Fri, 04 Mar 2011 08:33:36 +0000
Subject: [PATCH 1/4] OMAP3 and 4 hwmod I2C units only allow 16 bit access
In-Reply-To: <4D6FFCC0.8000007@ti.com>
References: <20110303134744.30648.91218.stgit@otae.warmcat.com>
	<20110303135022.30648.8996.stgit@otae.warmcat.com>
	<4D6FD2F2.8050701@ti.com> <4D6FD63C.6000102@linaro.org>
	<4D6FFCC0.8000007@ti.com>
Message-ID: <4D70A3E0.6030509@linaro.org>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 03/03/2011 08:40 PM, Somebody in the thread at some point said:

Hi -

>>> BTW, It will be good if you could update the omap_hwmod_2430_data.c file
>>> as well.
>>
>> I left it because I can't test it, but I'll happily do it additionally
>> if you can test it on some OMAP2 hardware.
>
> Don't hesitate to do it, and clearly add in the cover-letter that it was
> tested on 3430 and 4430 only.
> Someone from TI should be able to test it on 2430.

Alright I will extend the patch series to cover 2430 for this and note 
it is untested.

-Andy