* [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
@ 2011-03-05 9:51 Shweta Gulati
2011-03-08 2:03 ` Nishanth Menon
0 siblings, 1 reply; 2+ messages in thread
From: Shweta Gulati @ 2011-03-05 9:51 UTC (permalink / raw)
To: linux-arm-kernel
Almost all OMAP4 boards support OPP 800 MHz and OPP 1 GHz.
Enable them in OPP Table. For small minority of boards which use
OMAP4430-800 MHz device OPP 1GHz is not supported,
OPP 1GHz should be disabled from board file.
Signed-off-by: Shweta Gulati <shweta.gulati@ti.com>
Cc: linux-arm-kernel at lists.infradead.org
---
arch/arm/mach-omap2/opp4xxx_data.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index 57f1498..93b9744 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -71,9 +71,9 @@ static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
/* MPU OPP2 - OPP100 */
OPP_INITIALIZER("mpu", true, 600000000, OMAP4430_VDD_MPU_OPP100_UV),
/* MPU OPP3 - OPP-Turbo */
- OPP_INITIALIZER("mpu", false, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV),
+ OPP_INITIALIZER("mpu", true, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV),
/* MPU OPP4 - OPP-SB */
- OPP_INITIALIZER("mpu", false, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV),
+ OPP_INITIALIZER("mpu", true, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV),
/* L3 OPP1 - OPP50 */
OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4430_VDD_CORE_OPP50_UV),
/* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */
--
1.7.0.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
2011-03-05 9:51 [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP Shweta Gulati
@ 2011-03-08 2:03 ` Nishanth Menon
0 siblings, 0 replies; 2+ messages in thread
From: Nishanth Menon @ 2011-03-08 2:03 UTC (permalink / raw)
To: linux-arm-kernel
Shweta Gulati wrote, on 03/05/2011 03:21 PM:
> Almost all OMAP4 boards support OPP 800 MHz and OPP 1 GHz.
> Enable them in OPP Table. For small minority of boards which use
> OMAP4430-800 MHz device OPP 1GHz is not supported,
> OPP 1GHz should be disabled from board file.
>
> Signed-off-by: Shweta Gulati<shweta.gulati@ti.com>
> Cc: linux-arm-kernel at lists.infradead.org
> ---
> arch/arm/mach-omap2/opp4xxx_data.c | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
> index 57f1498..93b9744 100644
> --- a/arch/arm/mach-omap2/opp4xxx_data.c
> +++ b/arch/arm/mach-omap2/opp4xxx_data.c
> @@ -71,9 +71,9 @@ static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
> /* MPU OPP2 - OPP100 */
> OPP_INITIALIZER("mpu", true, 600000000, OMAP4430_VDD_MPU_OPP100_UV),
> /* MPU OPP3 - OPP-Turbo */
> - OPP_INITIALIZER("mpu", false, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV),
> + OPP_INITIALIZER("mpu", true, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV),
> /* MPU OPP4 - OPP-SB */
> - OPP_INITIALIZER("mpu", false, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV),
> + OPP_INITIALIZER("mpu", true, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV),
> /* L3 OPP1 - OPP50 */
> OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4430_VDD_CORE_OPP50_UV),
> /* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */
Acked-by: Nishanth Menon <nm@ti.com>
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-03-08 2:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-05 9:51 [PATCH V2 1/3] OMAP4: Enable 800 MHz and 1 GHz MPU-OPP Shweta Gulati
2011-03-08 2:03 ` Nishanth Menon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).