linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/7] da850: pruss board specific additions.
Date: Wed, 09 Mar 2011 12:59:41 +0100	[thread overview]
Message-ID: <4D776BAD.1020307@pengutronix.de> (raw)
In-Reply-To: <1299592667-21367-4-git-send-email-subhasish@mistralsolutions.com>

On 03/08/2011 02:57 PM, Subhasish Ghosh wrote:
> This patch adds board specific initializations and setup routines.
> 
> Signed-off-by: Subhasish Ghosh <subhasish@mistralsolutions.com>
> ---
>  arch/arm/mach-davinci/board-da850-evm.c |   25 +++++++++++++++++++++++++
>  1 files changed, 25 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index 11f986b..c614c82 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -1053,6 +1053,26 @@ static __init int da850_evm_init_cpufreq(void)
>  static __init int da850_evm_init_cpufreq(void) { return 0; }
>  #endif
>  
> +static struct da8xx_pruss_devices pruss_devices[] = {
> +	{.dev_name = NULL,},
> +};
> +
> +static int __init da8xx_evm_setup_pruss(void)
> +{
> +	u32 ret = 0;
your functions returns an int, not an u32
> +	u32 count;

use "int i" for loop counter.

> +
> +	for (count = 0; count < ARRAY_SIZE(pruss_devices); count++) {
> +		if (pruss_devices[count].setup != NULL) {

you may omit the "!= NULL"

> +			ret = pruss_devices[count].setup();
> +			if (ret)
> +				return ret;

in case of an error you don't clean up correct

> +		}
> +	}
> +
> +	return da8xx_register_pruss_mfd(pruss_devices);
> +}
> +
>  static __init void da850_evm_init(void)
>  {
>  	int ret;
> @@ -1127,6 +1147,11 @@ static __init void da850_evm_init(void)
>  
>  	da8xx_register_mcasp(0, &da850_evm_snd_data);
>  
> +	ret = da8xx_evm_setup_pruss();
> +	if (ret)
> +		pr_warning("%s: pruss initialization failed: %d\n",
> +				__func__, ret);
> +
>  	ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
>  	if (ret)
>  		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",


-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110309/9b942493/attachment.sig>

  parent reply	other threads:[~2011-03-09 11:59 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-08 13:57 [PATCH v3 0/7] pruss mfd drivers Subhasish Ghosh
2011-03-08 13:57 ` [PATCH v3 1/7] mfd: add pruss mfd driver Subhasish Ghosh
2011-03-09 11:56   ` Marc Kleine-Budde
2011-03-24 13:16     ` Subhasish Ghosh
2011-03-24 13:24       ` Marc Kleine-Budde
2011-03-24 13:41         ` Kurt Van Dijck
2011-03-11 15:28   ` Arnd Bergmann
2011-03-30  7:16     ` Subhasish Ghosh
2011-03-30 10:59       ` Arnd Bergmann
2011-04-05  6:40         ` Subhasish Ghosh
2011-03-30  9:15     ` Subhasish Ghosh
2011-03-30 11:38       ` Arnd Bergmann
2011-03-18 11:59   ` Nori, Sekhar
2011-03-18 12:39     ` Mark Brown
2011-03-22  9:35       ` Nori, Sekhar
2011-03-22  9:43         ` Nori, Sekhar
2011-03-22 16:52         ` Mark Brown
2011-03-08 13:57 ` [PATCH v3 2/7] da850: pruss platform specific additions Subhasish Ghosh
2011-03-08 15:17   ` Sergei Shtylyov
2011-03-08 13:57 ` [PATCH v3 3/7] da850: pruss board " Subhasish Ghosh
2011-03-08 15:19   ` Sergei Shtylyov
2011-03-09  4:29     ` Subhasish Ghosh
2011-03-09 11:59   ` Marc Kleine-Budde [this message]
2011-03-08 13:57 ` [PATCH v3 4/7] mfd: pruss SUART private data Subhasish Ghosh
2011-03-08 13:57 ` [PATCH v3 5/7] da850: pruss SUART board specific additions Subhasish Ghosh
2011-03-08 13:57 ` [PATCH v3 6/7] da850: pruss SUART platform " Subhasish Ghosh
2011-03-08 13:57 ` [PATCH v3 7/7] tty: add pruss SUART driver Subhasish Ghosh
2011-03-08 18:47   ` Randy Dunlap
2011-03-15  7:23     ` Subhasish Ghosh
2011-03-18  5:43   ` Subhasish Ghosh
2011-03-18 11:45     ` Alan Cox
2011-03-18 12:07     ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D776BAD.1020307@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).