From mboxrd@z Thu Jan 1 00:00:00 1970 From: b32955@freescale.com (Huang Shijie) Date: Mon, 28 Mar 2011 10:00:34 +0800 Subject: [ PATCH V2 3/7] MTD : add the database for the NANDs In-Reply-To: <201103251134.44731.ffainelli@freebox.fr> References: <1301048581-21321-1-git-send-email-b32955@freescale.com> <1301048581-21321-4-git-send-email-b32955@freescale.com> <201103251134.44731.ffainelli@freebox.fr> Message-ID: <4D8FEBC2.2030004@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Florian: > Hello Huang, > > On Friday 25 March 2011 11:22:57 Huang Shijie wrote: >> This is a new database for the NANDs which is searched by the id_bytes. >> >> Signed-off-by: Huang Shijie >> --- >> drivers/mtd/nand/nand_device_info.c | 154 >> +++++++++++++++++++++++++++++++++++ drivers/mtd/nand/nand_device_info.h | >> 83 +++++++++++++++++++ >> 2 files changed, 237 insertions(+), 0 deletions(-) >> create mode 100644 drivers/mtd/nand/nand_device_info.c >> create mode 100644 drivers/mtd/nand/nand_device_info.h >> >> diff --git a/drivers/mtd/nand/nand_device_info.c >> b/drivers/mtd/nand/nand_device_info.c new file mode 100644 >> index 0000000..3ceec9c >> --- /dev/null >> +++ b/drivers/mtd/nand/nand_device_info.c >> @@ -0,0 +1,154 @@ >> +/* >> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. >> + */ >> + >> +/* >> + * The code contained herein is licensed under the GNU General Public >> + * License. You may obtain a copy of the GNU General Public License >> + * Version 2 or later at the following locations: >> + * >> + * http://www.opensource.org/licenses/gpl-license.html >> + * http://www.gnu.org/copyleft/gpl.html >> + */ >> +#include >> +#include >> + >> +#include "nand_device_info.h" >> + >> +static const struct nand_device_info samsung_nand[] = { >> + { >> + .id = { 0xec, 0xd3, 0x14, 0x25, 0x64, 0xec, 0xd3, 0x14 }, >> + .id_len = 8, >> + .desc = "K9G8G08U0M, K9HAG08U1M", >> + .attr = ATTR(MLC, 1LL * SZ_1G, 128, 2 * SZ_1K + 64, 8, 512), >> + }, { >> + .id = { 0xec, 0xd7, 0xd5, 0x29, 0x38, 0x41, 0xec, 0xd7 }, >> + .id_len = 8, >> + .desc = "K9LBG08U0D", >> + .attr = ATTR(MLC, 4LL * SZ_1G, 128, 4 * SZ_1K + 218, 16, 512), >> + }, { >> + .id = { 0xec, 0xd5, 0x14, 0xb6, 0x74, 0xec, 0xd5, 0x14 }, >> + .id_len = 8, >> + .desc = "K9GAG08U0M", >> + .attr = ATTR(MLC, 2LL * SZ_1G, 128, 4 * SZ_1K + 218, 16, 512), >> + }, { >> + /* end of the table. */ >> + .id = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, >> + }, >> +}; > Sorry, but I do not see why this is still needed. drivers/mtd/nand_ids.c > should already recognize all of these chips correctly. If this is not the case > for you, you should fix nand_get_flash_type() instead. > These nands are only a example. I have other nands to add in future. I will fix nand_get_flash_type() in future, not now. thanks Btw : I forget to add the `busw` field in my nand_device_info{}. >> + >> +/* macro to get the id bytes */ >> +#define ID_GET_MFR_CODE(id) ((id)[0]) >> + >> +void nand_device_print_info(struct nand_device_info *info) >> +{ >> + unsigned i; >> + const char *mfr_name; >> + const char *cell_technology_name; >> + uint64_t chip_size; >> + const char *chip_size_units; >> + unsigned page_size; >> + unsigned oob_size; >> + struct nand_attr *attr =&info->attr; >> + >> + /* Prepare the manufacturer name. */ >> + mfr_name = "Unknown"; >> + for (i = 0; nand_manuf_ids[i].id; i++) { >> + if (nand_manuf_ids[i].id == ID_GET_MFR_CODE(info->id)) { >> + mfr_name = nand_manuf_ids[i].name; >> + break; >> + } >> + } >> + >> + /* Prepare the name of the cell technology. */ >> + switch (attr->cell_technology) { >> + case SLC: >> + cell_technology_name = "SLC"; >> + break; >> + case MLC: >> + cell_technology_name = "MLC"; >> + break; >> + default: >> + cell_technology_name = "Unknown"; >> + break; >> + } >> + >> + /* Prepare the chip size. */ >> + if ((attr->chip_size_in_bytes>= SZ_1G)&& >> + !(attr->chip_size_in_bytes % SZ_1G)) { >> + chip_size = attr->chip_size_in_bytes / ((uint64_t) SZ_1G); >> + chip_size_units = "GiB"; >> + } else if ((attr->chip_size_in_bytes>= SZ_1M)&& >> + !(attr->chip_size_in_bytes % SZ_1M)) { >> + chip_size = attr->chip_size_in_bytes / ((uint64_t) SZ_1M); >> + chip_size_units = "MiB"; >> + } else { >> + chip_size = attr->chip_size_in_bytes; >> + chip_size_units = "B"; >> + } >> + >> + /* Prepare the page geometry. */ >> + page_size = (1<< (fls(attr->page_total_size_in_bytes) - 1)); >> + oob_size = attr->page_total_size_in_bytes - page_size; >> + >> + /* Print the infomation. */ >> + pr_info("--------------------------------------\n"); >> + pr_info(" NAND device infomation (RAW)\n"); >> + pr_info("--------------------------------------\n"); >> + pr_info("Manufacturer : %s (0x%02x)\n", mfr_name, info->id[0]); >> + pr_info("Device Code : 0x%02x\n", info->id[1]); >> + pr_info("Cell Technology : %s\n", cell_technology_name); >> + pr_info("Chip Size : %llu %s\n", chip_size, chip_size_units); >> + pr_info("Pages per Block : %u\n", attr->block_size_in_pages); >> + pr_info("Page Geometry : %u+%u\n", page_size, oob_size); >> + pr_info("ECC Strength : %u bits\n", attr->ecc_strength_in_bits); >> + pr_info("ECC Size : %u B\n", attr->ecc_size_in_bytes); >> + pr_info("Description : %s\n", info->desc); >> +} >> + >> +static struct nand_device_info * __init >> +search_table(const struct nand_device_info *table, const uint8_t id[]) >> +{ >> + struct nand_device_info *info = (struct nand_device_info *)table; >> + >> + while (ID_GET_MFR_CODE(info->id)) { >> + int i; >> + >> + /* match all the valid id bytes. Is it too strict? */ >> + for (i = 0; i< info->id_len; i++) >> + if (info->id[i] != id[i]) >> + break; >> + >> + /* found it */ >> + if (i == info->id_len) >> + return info; >> + info++; >> + } >> + return NULL; >> +} >> + >> +struct nand_device_mfr_info { >> + uint8_t id; >> + const struct nand_device_info *table; >> +}; >> + >> +static const struct nand_device_mfr_info nand_device_mfr_directory[] = { >> + { NAND_MFR_SAMSUNG, samsung_nand }, >> + { 0, NULL }, >> +}; >> + >> +struct nand_device_info *nand_device_get_info(const uint8_t id[]) >> +{ >> + uint8_t mfr_id = ID_GET_MFR_CODE(id); >> + unsigned i; >> + >> + for (i = 0; nand_device_mfr_directory[i].id; i++) { >> + if (nand_device_mfr_directory[i].id == mfr_id) { >> + const struct nand_device_info *table; >> + >> + table = nand_device_mfr_directory[i].table; >> + return search_table(table, id); >> + } >> + } >> + return NULL; >> +} >> diff --git a/drivers/mtd/nand/nand_device_info.h >> b/drivers/mtd/nand/nand_device_info.h new file mode 100644 >> index 0000000..fe22233 >> --- /dev/null >> +++ b/drivers/mtd/nand/nand_device_info.h >> @@ -0,0 +1,83 @@ >> +/* >> + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. >> + */ >> + >> +/* >> + * The code contained herein is licensed under the GNU General Public >> + * License. You may obtain a copy of the GNU General Public License >> + * Version 2 or later at the following locations: >> + * >> + * http://www.opensource.org/licenses/gpl-license.html >> + * http://www.gnu.org/copyleft/gpl.html >> + */ >> +#ifndef __DRIVERS_NAND_DEVICE_INFO_H >> +#define __DRIVERS_NAND_DEVICE_INFO_H >> + >> +enum nand_device_cell_technology { >> + SLC = 0, >> + MLC = 1, >> +}; >> + >> +/** >> + * @cell_technology: The storage cell technology. >> + * @chip_size_in_bytes: The total size of the storage behind a >> single + * chip select, in bytes. Notice that >> this is *not* + * necessarily the total size >> of the storage in a + * *package*, which may >> contain several chips. + * @block_size_in_pages: The number of pages >> in a block. >> + * @page_total_size_in_bytes: The total size of a page, in bytes, >> including + * both the data and the OOB. >> + * @ecc_strength_in_bits: The strength of the ECC called for by the >> + * manufacturer, in number of correctable >> bits. + * @ecc_size_in_bytes: The size of the data block over >> which the + * manufacturer calls for the given >> ECC algorithm + * and strength. >> + */ >> +struct nand_attr { >> + /* Technology */ >> + enum nand_device_cell_technology cell_technology; >> + >> + /* Geometry */ >> + uint64_t chip_size_in_bytes; >> + uint32_t block_size_in_pages; >> + uint32_t page_total_size_in_bytes; >> + >> + /* ECC */ >> + uint16_t ecc_strength_in_bits; >> + uint16_t ecc_size_in_bytes; >> +}; >> + >> +#define ID_BYTES (8) >> +/* >> + * struct nand_device_info - Information about a single NAND Flash device. >> + * >> + * This structure contains all the *essential* information about a NAND >> Flash + * device, derived from the device's data sheet. >> + */ >> +struct nand_device_info { >> + /* id */ >> + uint8_t id[ID_BYTES]; >> + unsigned int id_len; >> + >> + /* Description */ >> + const char *desc; >> + >> + /* attribute*/ >> + struct nand_attr attr; >> +}; >> + >> +/* macro for the NAND attribute */ >> +#define ATTR(_a, _b, _c, _d, _e, _f) \ >> + { \ >> + .cell_technology = (_a), \ >> + .chip_size_in_bytes = (_b), \ >> + .block_size_in_pages = (_c), \ >> + .page_total_size_in_bytes = (_d), \ >> + .ecc_strength_in_bits = (_e), \ >> + .ecc_size_in_bytes = (_f), \ >> + } >> + >> +struct nand_device_info *nand_device_get_info(const uint8_t id_bytes[]); >> +void nand_device_print_info(struct nand_device_info *info); >> + >> +#endif Best Regards Huang Shijie