[PATCH] EP93xx: Remove ep93xx_gpio_dbg_show function

[ryan@bluewatersys.com (Ryan Mallon)]

On 03/31/2011 05:01 PM, Grant Likely wrote:
> On Tue, Mar 29, 2011 at 12:03:06PM +1300, Ryan Mallon wrote:
>> Hartley pointed out that the patch I posted to remove the irq internals
>> fiddling from ep93xx_gpio_dbg_show does not function as expected. It
>> will print [interrupt] beside all pins which are capable of being
>> interrupts, not just those which are currently configured as interrupts.
>>
>> The best solution is just to remove the custom ep93xx gpio debugfs
>> function all together. The generic gpiolib one is good enough.
>>
>> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
> 
> Applied, thanks.
> 
> g.

This is presently sitting in rmk's patch tracking system. I take it I
should drop it from there?

~Ryan

>> ---
>>
>> diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
>> index 34e071d..c74adf9 100644
>> --- a/arch/arm/mach-ep93xx/gpio.c
>> +++ b/arch/arm/mach-ep93xx/gpio.c
>> @@ -348,29 +348,6 @@ static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
>>  	return 0;
>>  }
>>  
>> -static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
>> -{
>> -	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
>> -	u8 data_reg, data_dir_reg;
>> -	int gpio, i;
>> -
>> -	data_reg = __raw_readb(ep93xx_chip->data_reg);
>> -	data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
>> -
>> -	gpio = ep93xx_chip->chip.base;
>> -	for (i = 0; i < chip->ngpio; i++, gpio++) {
>> -		int is_out = data_dir_reg & (1 << i);
>> -		int irq = gpio_to_irq(gpio);
>> -
>> -		seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s %s\n",
>> -				chip->label, i, gpio,
>> -				gpiochip_is_requested(chip, i) ? : "",
>> -				is_out ? "out" : "in ",
>> -				(data_reg & (1<<  i)) ? "hi" : "lo",
>> -				(!is_out && irq>= 0) ? "(interrupt)" : "");
>> -	}
>> -}
>> -
>>  #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
>>  	{								\
>>  		.chip = {						\
>> @@ -379,7 +356,6 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
>>  			.direction_output = ep93xx_gpio_direction_output, \
>>  			.get		  = ep93xx_gpio_get,		\
>>  			.set		  = ep93xx_gpio_set,		\
>> -			.dbg_show	  = ep93xx_gpio_dbg_show,	\
>>  			.base		  = base_gpio,			\
>>  			.ngpio		  = 8,				\
>>  		},							\
>>


-- 
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751
Fax:   +64 3 3779135			  USA 1800 261 2934