[PATCH V4 2/4] MTD : add the common code for GPMI controller driver

[b32955@freescale.com (Huang Shijie)]

Hi,
> Hi,
>
> I have one correction to your NAND driver. Please see inlined comments.
>
>> These files contain the common code for the GPMI driver.
>>
>> Signed-off-by: Huang Shijie<b32955@freescale.com>
>> ---
>>   drivers/mtd/nand/gpmi-nfc/gpmi-nfc-main.c | 2453
>> +++++++++++++++++++++++++++++
>>   drivers/mtd/nand/gpmi-nfc/gpmi-nfc.h      |  551 +++++++
>>   2 files changed, 3004 insertions(+), 0 deletions(-)
>>   create mode 100644 drivers/mtd/nand/gpmi-nfc/gpmi-nfc-main.c
>>   create mode 100644 drivers/mtd/nand/gpmi-nfc/gpmi-nfc.h
>>
>> diff --git a/drivers/mtd/nand/gpmi-nfc/gpmi-nfc-main.c
>> b/drivers/mtd/nand/gpmi-nfc/gpmi-nfc-main.c
>> new file mode 100644
>> index 0000000..7bbc448
>> --- /dev/null
>> +++ b/drivers/mtd/nand/gpmi-nfc/gpmi-nfc-main.c
>> @@ -0,0 +1,2453 @@
> <snip>
>
>> +#ifdef CONFIG_PM
>> +static int gpmi_nfc_suspend(struct platform_device *pdev,
> pm_message_t
>> state)
>> +{
>> +	return 0;
>> +}
>> +
>> +static int gpmi_nfc_resume(struct platform_device *pdev)
>> +{
>> +	return 0;
>> +}
>> +#else
>> +#define suspend  NULL
>> +#define resume   NULL
>> +#endif
> If CONFIG_PM is disabled your defines don't match function names.

thanks.
> <snip>
>
>> +/* This structure represents this driver to the platform management
>> system. */
>> +static struct platform_driver gpmi_nfc_driver = {
>> +	.driver = {
>> +		.name = GPMI_NFC_DRIVER_NAME,
>> +	},
>> +	.probe   = gpmi_nfc_probe,
>> +	.remove  = __exit_p(gpmi_nfc_remove),
>> +	.suspend = gpmi_nfc_suspend,
>> +	.resume  = gpmi_nfc_resume,
>> +	.id_table = gpmi_ids,
>> +};
> This section fails to compile as gpmi_nfc_suspend and gpmi_nfc_resume
> are undefined. It compiles fine if I add gpmi_nfc_ prefix to defines.
thanks. I will fix it in next version.

Best Regards
Huang Shijie
> --
> Veli-Pekka Peltola
> R&D Engineer
> Bluegiga Technologies
>
>