From mboxrd@z Thu Jan  1 00:00:00 1970
From: santosh.shilimkar@ti.com (Santosh Shilimkar)
Date: Thu, 21 Apr 2011 10:17:32 +0530
Subject: [PATCH] OMAP4: clockdomain: Follow recommended enable sequence
In-Reply-To: <alpine.DEB.2.00.1104201340450.5985@utopia.booyaka.com>
References: <1299245123-23444-1-git-send-email-rnayak@ti.com>
	<alpine.DEB.2.00.1103081937100.15132@utopia.booyaka.com>
	<4D775418.6050105@ti.com>
	<alpine.DEB.2.00.1103100514210.15132@utopia.booyaka.com>
	<alpine.DEB.2.00.1103100734490.15132@utopia.booyaka.com>
	<4D7A22F6.5050806@ti.com>
	<alpine.DEB.2.00.1104201340450.5985@utopia.booyaka.com>
Message-ID: <4DAFB6E4.3080304@ti.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 4/21/2011 1:12 AM, Paul Walmsley wrote:
>
> Hi Rajendra, Santosh,
>
> just FYI I just observed this happening without the clockdomain patch, and
> tracked this down.  It seems that there is an intermittent
> problem with the OMAP L3 bus code.  On the 35xx BeagleBoard here, it
> occasionally hangs after powerup:
>
> [    0.810119] OMAP GPIO hardware version 2.5
> [    0.815368] OMAP GPIO hardware version 2.5
> [    0.820465] OMAP GPIO hardware version 2.5
> [    0.825531] OMAP GPIO hardware version 2.5
> [    0.830657] OMAP GPIO hardware version 2.5
> [    0.835784] OMAP GPIO hardware version 2.5
> [    0.840881] initcall omap_gpio_drv_reg+0x0/0xc returned 0 after 38146
> usecs
> [    0.848358] calling  bdi_class_init+0x0/0x50 @ 1
> [    0.854003] initcall bdi_class_init+0x0/0x50 returned 0 after 0 usecs
> [    0.860870] calling  kobject_uevent_init+0x0/0x20 @ 1
> [    0.866363] initcall kobject_uevent_init+0x0/0x20 returned 0 after 0
> usecs
> [    0.873626] calling  gpiolib_sysfs_init+0x0/0x98 @ 1
> [    0.885894] initcall gpiolib_sysfs_init+0x0/0x98 returned 0 after 0
> usecs
> [    0.893157] calling  lcd_class_init+0x0/0x58 @ 1
> [    0.898742] initcall lcd_class_init+0x0/0x58 returned 0 after 0 usecs
> [    0.905731] calling  backlight_class_init+0x0/0x70 @ 1
> [    0.911834] initcall backlight_class_init+0x0/0x70 returned 0 after 0
> usecs
> [    0.919219] calling  tty_class_init+0x0/0x3c @ 1
> [    0.924743] initcall tty_class_init+0x0/0x3c returned 0 after 0 usecs
> [    0.931610] calling  vtconsole_class_init+0x0/0xe4 @ 1
> [    0.938812] initcall vtconsole_class_init+0x0/0xe4 returned 0 after
> 7629 usecs
> [    0.946472] calling  wakeup_sources_debugfs_init+0x0/0x3c @ 1
> [    0.952606] initcall wakeup_sources_debugfs_init+0x0/0x3c returned 0
> after 0 usecs
> [    0.960571] calling  spi_init+0x0/0x88 @ 1
> [    0.966247] initcall spi_init+0x0/0x88 returned 0 after 0 usecs
> [    0.972564] calling  i2c_init+0x0/0x70 @ 1
> [    0.978485] initcall i2c_init+0x0/0x70 returned 0 after 0 usecs
> [    0.984832] calling  omap3_l3_init+0x0/0x14 @ 1
>
Will have a look at it