[RFC] ep93xx: switch gpio to early platform device

[ryan@bluewatersys.com (Ryan Mallon)]

On 04/27/2011 08:57 AM, H Hartley Sweeten wrote:
> Convert the ep93xx gpio support into an early platform device. 
> 
> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Ryan Mallon <ryan@bluewatersys.com>

Hi Hartley,

Couple of comments below.

> ---
> 
> diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
> index 8207954..e2d9e3e 100644
> --- a/arch/arm/mach-ep93xx/core.c
> +++ b/arch/arm/mach-ep93xx/core.c
> @@ -241,6 +241,27 @@ unsigned int ep93xx_chip_revision(void)
>  }
>  
>  /*************************************************************************
> + * EP93xx gpio
> + *************************************************************************/
> +static struct platform_device ep93xx_gpio_device = {
> +	.name		= "ep93xx-gpio",
> +	.id		= -1,
> +};
> +
> +static struct platform_device *ep93xx_early_gpio_device[] __initdata = {
> +	&ep93xx_gpio_device,
> +};

Maybe just call this ep93xx_early_devices. That way if we add additional
early devices it doesn't need to get renamed?

> +
> +static void __init ep93xx_init_early_gpio(void)
> +{
> +	int num = ARRAY_SIZE(ep93xx_early_gpio_device);
> +
> +	early_platform_add_devices(ep93xx_early_gpio_device, num);
> +	early_platform_driver_register_all("early_ep93xx_gpio");
> +	early_platform_driver_probe("early_ep93xx_gpio", num, 0);
> +}
> +
> +/*************************************************************************
>   * EP93xx peripheral handling
>   *************************************************************************/
>  #define EP93XX_UART_MCR_OFFSET		(0x0100)
> @@ -866,14 +887,12 @@ void __init ep93xx_register_ac97(void)
>  	platform_device_register(&ep93xx_pcm_device);
>  }
>  
> -extern void ep93xx_gpio_init(void);
> -
>  void __init ep93xx_init_devices(void)
>  {
>  	/* Disallow access to MaverickCrunch initially */
>  	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
>  
> -	ep93xx_gpio_init();
> +	ep93xx_init_early_gpio();
>  
>  	amba_device_register(&uart1_device, &iomem_resource);
>  	amba_device_register(&uart2_device, &iomem_resource);
> diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
> index a5a9ff7..e820316 100644
> --- a/arch/arm/mach-ep93xx/gpio.c
> +++ b/arch/arm/mach-ep93xx/gpio.c
> @@ -4,6 +4,7 @@
>   * Generic EP93xx GPIO handling
>   *
>   * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com>
> + * Copyright (c) 2011 H Hartley Sweeten <hsweeten@visionengravers.com>
>   *
>   * Based on code originally from:
>   *  linux/arch/arm/mach-ep93xx/core.c
> @@ -13,10 +14,9 @@
>   *  published by the Free Software Foundation.
>   */
>  
> -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

This is really a separate change. I don't mind, but wonder if it should
be a separate patch.

> -#include <linux/init.h>
> -#include <linux/module.h>
> +#include <linux/platform_device.h>
>  #include <linux/seq_file.h>
>  #include <linux/io.h>
>  #include <linux/gpio.h>
> @@ -406,10 +406,15 @@ static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = {
>  	EP93XX_GPIO_BANK("H", 0x40, 0x44, 56),
>  };
>  
> -void __init ep93xx_gpio_init(void)
> +static int __devinit ep93xx_gpio_probe(struct platform_device *pdev)
>  {
>  	int i;
>  
> +	if (!is_early_platform_device(pdev)) {
> +		pr_info("called via non early platform\n");
> +		return 0;

pr_err? Should probably either return an error code, or just warn and
then fall through and register anyway.

> +	}
> +
>  	/* Set Ports C, D, E, G, and H for GPIO use */
>  	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
>  				 EP93XX_SYSCON_DEVCFG_GONK |
> @@ -431,4 +436,22 @@ void __init ep93xx_gpio_init(void)
>  
>  		gpiochip_add(chip);
>  	}
> +
> +	pr_info("subsystem initialized\n");

We don't need more noise in the syslog :-).

> +	return 0;
> +}
> +
> +static int __devexit ep93xx_gpio_remove(struct platform_device *pdev)
> +{
> +	return -EBUSY;

Isn't the remove function optional? From what I can tell the return type
of driver->remove never gets checked anyway?

>  }
> +
> +static struct platform_driver ep93xx_gpio_driver = {
> +	.driver		= {
> +		.name	= "ep93xx-gpio",
> +	},
> +	.probe		= ep93xx_gpio_probe,
> +	.remove		= __devexit_p(ep93xx_gpio_remove),
> +};
> +
> +early_platform_init("early_ep93xx_gpio", &ep93xx_gpio_driver);

This can be moved to drivers/gpio/ now also right? If so, it should be a
separate patch after this one.

~Ryan

-- 
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751
Fax:   +64 3 3779135			  USA 1800 261 2934