From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/1] can: add pruss CAN driver.
Date: Wed, 27 Apr 2011 15:21:56 +0200 [thread overview]
Message-ID: <4DB81874.1060904@pengutronix.de> (raw)
In-Reply-To: <46D523E49EFF489F9B088AE7B9CD7286@subhasishg>
On 04/27/2011 03:08 PM, Subhasish Ghosh wrote:
>>>> +static u32 pruss_intc_init[19][3] = {
>>>> + {PRUSS_INTC_POLARITY0, PRU_INTC_REGMAP_MASK, 0xFFFFFFFF},
>>>> + {PRUSS_INTC_POLARITY1, PRU_INTC_REGMAP_MASK, 0xFFFFFFFF},
>>>> + {PRUSS_INTC_TYPE0, PRU_INTC_REGMAP_MASK, 0x1C000000},
>>>> + {PRUSS_INTC_TYPE1, PRU_INTC_REGMAP_MASK, 0},
>>>> + {PRUSS_INTC_GLBLEN, 0, 1},
>>>> + {PRUSS_INTC_HOSTMAP0, PRU_INTC_REGMAP_MASK, 0x03020100},
>>>> + {PRUSS_INTC_HOSTMAP1, PRU_INTC_REGMAP_MASK, 0x07060504},
>>>> + {PRUSS_INTC_HOSTMAP2, PRU_INTC_REGMAP_MASK, 0x0000908},
>>>> + {PRUSS_INTC_CHANMAP0, PRU_INTC_REGMAP_MASK, 0},
>>>> + {PRUSS_INTC_CHANMAP8, PRU_INTC_REGMAP_MASK, 0x00020200},
>>>> + {PRUSS_INTC_STATIDXCLR, 0, 32},
>>>> + {PRUSS_INTC_STATIDXCLR, 0, 19},
>>>> + {PRUSS_INTC_ENIDXSET, 0, 19},
>>>> + {PRUSS_INTC_STATIDXCLR, 0, 18},
>>>> + {PRUSS_INTC_ENIDXSET, 0, 18},
>>>> + {PRUSS_INTC_STATIDXCLR, 0, 34},
>>>> + {PRUSS_INTC_ENIDXSET, 0, 34},
>>>> + {PRUSS_INTC_ENIDXSET, 0, 32},
>>>> + {PRUSS_INTC_HOSTINTEN, 0, 5}
>>>
>>> please add ","
>>
>> Also a struct to describe each entry would improve readability.
>> Then you could also use ARRAY_SIZE.
>
> SG _ I could not follow this, are you recommending that I create a
> structure with three variables and then create
> an array for it.
> something like:
>
> const static struct [] = {
> {
> unsigned int reg_base;
> unsigned int reg_mask;
> unsigned int reg_val;
> },
> ...
> };
I think this isn't valid C. It should look like this:
struct pruss_intc_init {
unsigned long reg_base;
u32 reg_mask;
u32 reg+val;
};
static const struct pruss_intc_init pruss_initc_init[] = {
{ .reg_base = 0xdeadbeef, .reg_mask = 0xaa, .reg_val = 0x55 },
...
};
I'm not sure about the datatype of reg_base. I haven't looked at the
code that uses this array.
cheers, Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110427/899d2e60/attachment.sig>
next prev parent reply other threads:[~2011-04-27 13:21 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-22 12:11 [PATCH v4 0/1] pruss CAN driver Subhasish Ghosh
2011-04-22 12:11 ` [PATCH v4 1/1] can: add " Subhasish Ghosh
2011-04-22 15:50 ` Marc Kleine-Budde
2011-04-25 20:06 ` Wolfgang Grandegger
2011-04-27 13:08 ` Subhasish Ghosh
2011-04-27 13:21 ` Marc Kleine-Budde [this message]
2011-04-27 13:25 ` Arnd Bergmann
2011-05-04 7:13 ` Subhasish Ghosh
2011-05-04 13:11 ` Arnd Bergmann
2011-05-04 14:33 ` Wolfgang Grandegger
2011-05-04 14:48 ` Arnd Bergmann
2011-05-04 16:00 ` Wolfgang Grandegger
2011-05-10 10:11 ` Subhasish Ghosh
2011-05-10 10:27 ` Alan Cox
2011-05-10 12:21 ` Subhasish Ghosh
2011-05-11 21:31 ` Arnd Bergmann
2011-05-11 21:44 ` Arnd Bergmann
2011-05-11 22:39 ` Marc Kleine-Budde
2011-05-11 22:56 ` Alan Cox
2011-05-12 7:13 ` Wolfgang Grandegger
2011-05-12 10:58 ` Kurt Van Dijck
2011-05-12 12:54 ` Arnd Bergmann
2011-05-12 13:04 ` Marc Kleine-Budde
2011-05-12 14:41 ` Oliver Hartkopp
2011-05-22 10:30 ` Arnd Bergmann
2011-05-23 6:21 ` Oliver Hartkopp
2011-05-23 8:23 ` Marc Kleine-Budde
2011-05-27 8:31 ` Wolfgang Grandegger
2011-05-12 7:04 ` Wolfgang Grandegger
2011-05-04 15:57 ` Kurt Van Dijck
2011-05-04 16:09 ` Wolfgang Grandegger
2011-05-04 20:55 ` Oliver Hartkopp
2011-04-27 13:28 ` Wolfgang Grandegger
2011-04-27 13:34 ` Wolfgang Grandegger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DB81874.1060904@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).