[PATCH 0/14] at91: factorize soc init and switch to early platform

[ryan@bluewatersys.com (Ryan Mallon)]

On 04/26/2011 06:08 AM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Hi,
>
> 	The following patch series start to factorize the soc init
> 	and switch gpio and timers to early platform
>
> 	diff stat on arm
>
> 	80 files changed, 1690 insertions(+), 2053 deletions(-)

I finally had a chance to test this. On our Snapper 9G20 board
(AT91SAM9G20) the latest linux-next gives me:

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
<5>Linux version 2.6.39-rc4-next-20110427+ (ryan at okiwi) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #850 Thu Apr 28 09:07:43 NZST 2011
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Bluewater Systems Snapper 9260/9G20 module
Memory policy: ECC disabled, Data cache writeback
<0>Kernel panic - not syncing: Impossible to detect the CPU type
[<c002fb1c>] (unwind_backtrace+0x0/0xe4) from [<c0230820>] (panic+0x50/0x178)
[<c0230820>] (panic+0x50/0x178) from [<c000d414>] (at91_initialize+0x18/0x20)
[<c000d414>] (at91_initialize+0x18/0x20) from [<c000e298>] (snapper9260_map_io+0xc/0x5c)
[<c000e298>] (snapper9260_map_io+0xc/0x5c) from [<c000d0ec>] (paging_init+0x668/0x728)
[<c000d0ec>] (paging_init+0x668/0x728) from [<c000b5cc>] (setup_arch+0x39c/0x620)
[<c000b5cc>] (setup_arch+0x39c/0x620) from [<c000873c>] (start_kernel+0x6c/0x2c8)


I'll have a better look at this later to see if I can find the problem,
though I suspect the remapping of the AT91_DBGU location is to blame.
What platforms have you tested this on?

~Ryan

-- 
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751 
Fax:   +64 3 3779135			  USA 1800 261 2934