[PATCH] arm: omap2plus: fix ads7846 pendown gpio request

[thomas.weber.linux@googlemail.com (Thomas Weber)]

Am 04.05.2011 17:04, schrieb Igor Grinberg:
> introduced by: 96974a24
> (omap: consolidate touch screen initialization among different boards)
>
> ads7846 driver can use either gpio_pendown or get_pendown_state()
> callback. In case of gpio_pendown, it requests the provided gpio_pendown
> thus resulting in double requesting that gpio:
>
> ads7846 spi1.0: failed to request pendown GPIO57
> ads7846: probe of spi1.0 failed with error -16
>
> Fix this by restricting the gpio request to the case of
> get_pendown_state() callback is used.
>
> Signed-off-by: Igor Grinberg<grinberg@compulab.co.il>
> ---
>   arch/arm/mach-omap2/common-board-devices.c |   20 ++++++++++----------
>   1 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
> index d57c71d..61fee80 100644
> --- a/arch/arm/mach-omap2/common-board-devices.c
> +++ b/arch/arm/mach-omap2/common-board-devices.c
> @@ -83,17 +83,17 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
>   	struct spi_board_info *spi_bi =&ads7846_spi_board_info;
>   	int err;
>
> -	err = gpio_request(gpio_pendown, "TS PenDown");
> -	if (err) {
> -		pr_err("Could not obtain gpio for TS PenDown: %d\n", err);
> -		return;
> -	}
> -
> -	gpio_direction_input(gpio_pendown);
> -	gpio_export(gpio_pendown, 0);
> +	if (board_pdata&&  board_pdata->get_pendown_state) {
> +		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
> +		if (err) {
> +			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
> +			return;
> +		}
> +		gpio_export(gpio_pendown, 0);
>
> -	if (gpio_debounce)
> -		gpio_set_debounce(gpio_pendown, gpio_debounce);
> +		if (gpio_debounce)
> +			gpio_set_debounce(gpio_pendown, gpio_debounce);
> +	}
>
>   	ads7846_config.gpio_pendown = gpio_pendown;
>
Tested-by: Thomas Weber <weber@corscience.de>

On Devkit8000.

Thanks.

Thomas