From mboxrd@z Thu Jan 1 00:00:00 1970 From: sshtylyov@mvista.com (Sergei Shtylyov) Date: Fri, 08 Jul 2011 15:49:35 +0400 Subject: [PATCH 1/3] ARM: OMAP4: Add pcm049 to Kconfig/Makefile In-Reply-To: <1310119464-3514-2-git-send-email-j.weitzel@phytec.de> References: <1310119464-3514-1-git-send-email-j.weitzel@phytec.de> <1310119464-3514-2-git-send-email-j.weitzel@phytec.de> Message-ID: <4E16EECF.7030102@mvista.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello. On 08-07-2011 14:04, Jan Weitzel wrote: > Signed-off-by: Jan Weitzel > --- > arch/arm/mach-omap2/Kconfig | 5 +++++ > arch/arm/mach-omap2/Makefile | 4 ++++ > 2 files changed, 9 insertions(+), 0 deletions(-) > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 19d5891..c6a2d43 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig [...] > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > index b148077..e81b594 100644 > --- a/arch/arm/mach-omap2/Makefile > +++ b/arch/arm/mach-omap2/Makefile > @@ -238,6 +238,10 @@ obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \ > hsmmc.o \ > omap_phy_internal.o > > +obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o \ You need to first add board-omap4pcm049.c, and only then wire it to the Makefile. You could do both in onme patch though... WBR, Sergei