[PATCH 1/2] dt: add helper function to read u32 arrays

[PATCH 1/2] dt: add helper function to read u32 arrays

[Rob Herring]

From: Rob Herring <rob.herring@calxeda.com>

Rework of_property_read_u32 to read an array of values. Then
of_property_read_u32 becomes an inline with array size of 1.

Also make struct device_node ptr const.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
---

Grant, 

Perhaps you want to roll this into the original patch?

It would also be nice if there were empty versions of the helpers
as well.

Rob

 drivers/of/base.c  |   19 +++++++++++++------
 include/linux/of.h |   14 ++++++++++++--
 2 files changed, 25 insertions(+), 8 deletions(-)

diff --git a/drivers/of/base.c b/drivers/of/base.c
index b8b65fd..745537d 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -596,32 +596,39 @@ struct device_node *of_find_node_by_phandle(phandle handle)
 EXPORT_SYMBOL(of_find_node_by_phandle);
 
 /**
- * of_property_read_u32 - Find and read a 32 bit integer from a property
+ * of_property_read_u32_array - Find and read an array of 32 bit integers
+ * from a property.
+ *
  * @np:		device node from which the property value is to be read.
  * @propname:	name of the property to be searched.
  * @out_value:	pointer to return value, modified only if return value is 0.
  *
- * Search for a property in a device node and read a 32-bit value from
+ * Search for a property in a device node and read 32-bit value(s) from
  * it. Returns 0 on success, -EINVAL if the property does not exist,
  * -ENODATA if property does not have a value, and -EOVERFLOW if the
  * property data isn't large enough.
  *
  * The out_value is modified only if a valid u32 value can be decoded.
  */
-int of_property_read_u32(struct device_node *np, char *propname, u32 *out_value)
+int of_property_read_u32_array(const struct device_node *np, char *propname,
+			       u32 *out_values, size_t sz)
 {
 	struct property *prop = of_find_property(np, propname, NULL);
+	const __be32 *val;
 
 	if (!prop)
 		return -EINVAL;
 	if (!prop->value)
 		return -ENODATA;
-	if (sizeof(*out_value) > prop->length)
+	if ((sz * sizeof(*out_values)) > prop->length)
 		return -EOVERFLOW;
-	*out_value = be32_to_cpup(prop->value);
+
+	val = prop->value;
+	while (sz--)
+		*out_values++ = be32_to_cpup(val++);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(of_property_read_u32);
+EXPORT_SYMBOL_GPL(of_property_read_u32_array);
 
 /**
  * of_property_read_string - Find and read a string from a property
diff --git a/include/linux/of.h b/include/linux/of.h
index 4fc4c1b..41f10e2 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -195,8 +195,18 @@ extern struct device_node *of_find_node_with_property(
 extern struct property *of_find_property(const struct device_node *np,
 					 const char *name,
 					 int *lenp);
-extern int of_property_read_u32(struct device_node *np, char *propname,
-					u32 *out_value);
+extern int of_property_read_u32_array(const struct device_node *np,
+				      char *propname,
+				      u32 *out_values,
+				      size_t sz);
+
+static inline int of_property_read_u32(const struct device_node *np,
+				       char *propname,
+				       u32 *out_value)
+{
+	return of_property_read_u32_array(np, propname, out_value, 1);
+}
+
 extern int of_property_read_string(struct device_node *np, char *propname,
 					char **out_string);
 extern int of_device_is_compatible(const struct device_node *device,
-- 
1.7.4.1

[PATCH v4 2/2] ARM: l2x0: Add OF based initialization

[Rob Herring]

From: Rob Herring <rob.herring@calxeda.com>

This adds probing for ARM L2x0 cache controllers via device tree. Support
includes the L210, L220, and PL310 controllers. The binding allows setting
up cache RAM latencies and filter addresses (PL310 only).

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
Changes in v4:
- Documentation fixes
- Add "arm," prefix to bindings
- Change filter-ranges binding values to <start length>
- Refactor l2x0 and pl310 init into separate functions
- Use new OF helpers to read u32 binding values.

 Documentation/devicetree/bindings/arm/l2cc.txt |   43 ++++++++++
 arch/arm/include/asm/hardware/cache-l2x0.h     |   17 ++++
 arch/arm/mm/cache-l2x0.c                       |  103 ++++++++++++++++++++++++
 3 files changed, 163 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/l2cc.txt

diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
new file mode 100644
index 0000000..ab5b3f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -0,0 +1,43 @@
+* ARM L2 Cache Controller
+
+ARM cores often have a separate level 2 cache controller. There are various
+implementations of the L2 cache controller with compatible programming models.
+The ARM L2 cache representation in the device tree should be done as follows:
+
+Required properties:
+
+- compatible : should be one of:
+	"arm,pl310-cache"
+	"arm,l220-cache"
+	"arm,l210-cache"
+- cache-unified : Specifies the cache is a unified cache.
+- cache-level : Should be set to 2 for a level 2 cache.
+- reg : Physical base address and size of cache controller's memory mapped
+  registers.
+
+Optional properties:
+
+- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of
+  read, write and setup latencies. Minimum valid values are 1. Controllers
+  without setup latency control should use a value of 0.
+- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of
+  read, write and setup latencies. Controllers without setup latency control
+  should use 0. Controllers without separate read and write Tag RAM latency
+  values should only use the first cell.
+- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell.
+- arm,filter-ranges : <start length> Starting address and length of window to
+  filter. Addresses in the filter window are directed to the M1 port. Other
+  addresses will go to the M0 port.
+
+Example:
+
+L2: cache-controller {
+        compatible = "arm,pl310-cache";
+        reg = <0xfff12000 0x1000>;
+        arm,data-latency = <1 1 1>;
+        arm,tag-latency = <2 2 2>;
+        arm,filter-latency = <0x80000000 0x8000000>;
+        cache-unified;
+        cache-level = <2>;
+};
+
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 16bd480..8fe149f 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -47,6 +47,8 @@
 #define L2X0_CLEAN_INV_WAY		0x7FC
 #define L2X0_LOCKDOWN_WAY_D		0x900
 #define L2X0_LOCKDOWN_WAY_I		0x904
+#define L2X0_ADDR_FILTER_START		0xC00
+#define L2X0_ADDR_FILTER_END		0xC04
 #define L2X0_TEST_OPERATION		0xF00
 #define L2X0_LINE_DATA			0xF10
 #define L2X0_LINE_TAG			0xF30
@@ -62,6 +64,14 @@
 #define L2X0_CACHE_ID_PART_L310		(3 << 6)
 
 #define L2X0_AUX_CTRL_MASK			0xc0000fff
+#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT	0
+#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK	0x7
+#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT	3
+#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK	(0x7 << 3)
+#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT		6
+#define L2X0_AUX_CTRL_TAG_LATENCY_MASK		(0x7 << 6)
+#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT	9
+#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK	(0x7 << 9)
 #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT	16
 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT		17
 #define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x3 << 17)
@@ -72,8 +82,15 @@
 #define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT	29
 #define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT		30
 
+#define L2X0_LATENCY_CTRL_SETUP_SHIFT	0
+#define L2X0_LATENCY_CTRL_RD_SHIFT	4
+#define L2X0_LATENCY_CTRL_WR_SHIFT	8
+
+#define L2X0_ADDR_FILTER_EN		1
+
 #ifndef __ASSEMBLY__
 extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask);
 #endif
 
 #endif
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index ef59099..274dc54 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -16,9 +16,12 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -344,3 +347,103 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
 			ways, cache_id, aux, l2x0_size);
 }
+
+#ifdef CONFIG_OF
+static void __init l2x0_of_setup(const struct device_node *np,
+				 __u32 *aux_val, __u32 *aux_mask)
+{
+	u32 data[2] = { 0, 0 };
+	u32 tag = 0;
+	u32 dirty = 0;
+	u32 val = 0, mask = 0;
+
+	of_property_read_u32(np, "arm,tag-latency", &tag);
+	if (tag) {
+		mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
+		val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
+	}
+
+	of_property_read_u32_array(np, "arm,data-latency",
+				   data, ARRAY_SIZE(data));
+	if (data[0] && data[1]) {
+		mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
+			L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
+		val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
+		       ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
+	}
+
+	of_property_read_u32(np, "arm,dirty-latency", &dirty);
+	if (dirty) {
+		mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
+		val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
+	}
+
+	*aux_val &= ~mask;
+	*aux_val |= val;
+	*aux_mask &= ~mask;
+}
+
+static void __init pl310_of_setup(const struct device_node *np,
+				  __u32 *aux_val, __u32 *aux_mask)
+{
+	u32 data[3] = { 0, 0, 0 };
+	u32 tag[3] = { 0, 0, 0 };
+	u32 filter[2] = { 0, 0 };
+
+	of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
+	if (tag[0] && tag[1] && tag[2])
+		writel_relaxed(
+			((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
+			((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
+			((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
+			l2x0_base + L2X0_TAG_LATENCY_CTRL);
+
+	of_property_read_u32_array(np, "arm,data-latency",
+				   data, ARRAY_SIZE(data));
+	if (data[0] && data[1] && data[2])
+		writel_relaxed(
+			((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
+			((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
+			((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
+			l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+	of_property_read_u32_array(np, "arm,filter-ranges",
+				   filter, ARRAY_SIZE(filter));
+	if (filter[0] && filter[1]) {
+		writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
+			       l2x0_base + L2X0_ADDR_FILTER_END);
+		writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN,
+			       l2x0_base + L2X0_ADDR_FILTER_START);
+	}
+}
+
+static const struct of_device_id l2x0_ids[] __initconst = {
+	{ .compatible = "arm,pl310-cache", .data = pl310_of_setup },
+	{ .compatible = "arm,l220-cache", .data = l2x0_of_setup },
+	{ .compatible = "arm,l210-cache", .data = l2x0_of_setup },
+	{}
+};
+
+int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask)
+{
+	struct device_node *np;
+	void (*l2_setup)(const struct device_node *np,
+		__u32 *aux_val, __u32 *aux_mask);
+
+	np = of_find_matching_node(NULL, l2x0_ids);
+	if (!np)
+		return -ENODEV;
+	l2x0_base = of_iomap(np, 0);
+	if (!l2x0_base)
+		return -ENOMEM;
+
+	/* L2 configuration can only be changed if the cache is disabled */
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
+		l2_setup = of_match_node(l2x0_ids, np)->data;
+		if (l2_setup)
+			l2_setup(np, &aux_val, &aux_mask);
+	}
+	l2x0_init(l2x0_base, aux_val, aux_mask);
+	return 0;
+}
+#endif
-- 
1.7.4.1

[PATCH v4 2/2] ARM: l2x0: Add OF based initialization

[Arnd Bergmann]

On Wednesday 06 July 2011 22:42:59 Rob Herring wrote:
> 
> From: Rob Herring <rob.herring@calxeda.com>
> 
> This adds probing for ARM L2x0 cache controllers via device tree. Support
> includes the L210, L220, and PL310 controllers. The binding allows setting
> up cache RAM latencies and filter addresses (PL310 only).
> 
> Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Acked-by: Arnd Bergmann <arnd@arndb.de>

[PATCH v4 2/2] ARM: l2x0: Add OF based initialization

[Grant Likely]

On Wed, Jul 06, 2011 at 03:42:59PM -0500, Rob Herring wrote:
> From: Rob Herring <rob.herring@calxeda.com>
> 
> This adds probing for ARM L2x0 cache controllers via device tree. Support
> includes the L210, L220, and PL310 controllers. The binding allows setting
> up cache RAM latencies and filter addresses (PL310 only).
> 
> Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Acked-by: Grant Likely <grant.likely@secretlab.ca>

By rights, this should go via the arm tree, but it depends on patches
that are already in devicetree/next.  Arnd, how do you want to handle
this?  I want to avoid rebasing devicetree/next.

g.

> ---
> Changes in v4:
> - Documentation fixes
> - Add "arm," prefix to bindings
> - Change filter-ranges binding values to <start length>
> - Refactor l2x0 and pl310 init into separate functions
> - Use new OF helpers to read u32 binding values.
> 
>  Documentation/devicetree/bindings/arm/l2cc.txt |   43 ++++++++++
>  arch/arm/include/asm/hardware/cache-l2x0.h     |   17 ++++
>  arch/arm/mm/cache-l2x0.c                       |  103 ++++++++++++++++++++++++
>  3 files changed, 163 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/l2cc.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
> new file mode 100644
> index 0000000..ab5b3f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/l2cc.txt
> @@ -0,0 +1,43 @@
> +* ARM L2 Cache Controller
> +
> +ARM cores often have a separate level 2 cache controller. There are various
> +implementations of the L2 cache controller with compatible programming models.
> +The ARM L2 cache representation in the device tree should be done as follows:
> +
> +Required properties:
> +
> +- compatible : should be one of:
> +	"arm,pl310-cache"
> +	"arm,l220-cache"
> +	"arm,l210-cache"
> +- cache-unified : Specifies the cache is a unified cache.
> +- cache-level : Should be set to 2 for a level 2 cache.
> +- reg : Physical base address and size of cache controller's memory mapped
> +  registers.
> +
> +Optional properties:
> +
> +- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of
> +  read, write and setup latencies. Minimum valid values are 1. Controllers
> +  without setup latency control should use a value of 0.
> +- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of
> +  read, write and setup latencies. Controllers without setup latency control
> +  should use 0. Controllers without separate read and write Tag RAM latency
> +  values should only use the first cell.
> +- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell.
> +- arm,filter-ranges : <start length> Starting address and length of window to
> +  filter. Addresses in the filter window are directed to the M1 port. Other
> +  addresses will go to the M0 port.
> +
> +Example:
> +
> +L2: cache-controller {
> +        compatible = "arm,pl310-cache";
> +        reg = <0xfff12000 0x1000>;
> +        arm,data-latency = <1 1 1>;
> +        arm,tag-latency = <2 2 2>;
> +        arm,filter-latency = <0x80000000 0x8000000>;
> +        cache-unified;
> +        cache-level = <2>;
> +};
> +
> diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
> index 16bd480..8fe149f 100644
> --- a/arch/arm/include/asm/hardware/cache-l2x0.h
> +++ b/arch/arm/include/asm/hardware/cache-l2x0.h
> @@ -47,6 +47,8 @@
>  #define L2X0_CLEAN_INV_WAY		0x7FC
>  #define L2X0_LOCKDOWN_WAY_D		0x900
>  #define L2X0_LOCKDOWN_WAY_I		0x904
> +#define L2X0_ADDR_FILTER_START		0xC00
> +#define L2X0_ADDR_FILTER_END		0xC04
>  #define L2X0_TEST_OPERATION		0xF00
>  #define L2X0_LINE_DATA			0xF10
>  #define L2X0_LINE_TAG			0xF30
> @@ -62,6 +64,14 @@
>  #define L2X0_CACHE_ID_PART_L310		(3 << 6)
>  
>  #define L2X0_AUX_CTRL_MASK			0xc0000fff
> +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT	0
> +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK	0x7
> +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT	3
> +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK	(0x7 << 3)
> +#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT		6
> +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK		(0x7 << 6)
> +#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT	9
> +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK	(0x7 << 9)
>  #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT	16
>  #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT		17
>  #define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x3 << 17)
> @@ -72,8 +82,15 @@
>  #define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT	29
>  #define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT		30
>  
> +#define L2X0_LATENCY_CTRL_SETUP_SHIFT	0
> +#define L2X0_LATENCY_CTRL_RD_SHIFT	4
> +#define L2X0_LATENCY_CTRL_WR_SHIFT	8
> +
> +#define L2X0_ADDR_FILTER_EN		1
> +
>  #ifndef __ASSEMBLY__
>  extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
> +extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask);
>  #endif
>  
>  #endif
> diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
> index ef59099..274dc54 100644
> --- a/arch/arm/mm/cache-l2x0.c
> +++ b/arch/arm/mm/cache-l2x0.c
> @@ -16,9 +16,12 @@
>   * along with this program; if not, write to the Free Software
>   * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>   */
> +#include <linux/err.h>
>  #include <linux/init.h>
>  #include <linux/spinlock.h>
>  #include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
>  
>  #include <asm/cacheflush.h>
>  #include <asm/hardware/cache-l2x0.h>
> @@ -344,3 +347,103 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
>  	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
>  			ways, cache_id, aux, l2x0_size);
>  }
> +
> +#ifdef CONFIG_OF
> +static void __init l2x0_of_setup(const struct device_node *np,
> +				 __u32 *aux_val, __u32 *aux_mask)
> +{
> +	u32 data[2] = { 0, 0 };
> +	u32 tag = 0;
> +	u32 dirty = 0;
> +	u32 val = 0, mask = 0;
> +
> +	of_property_read_u32(np, "arm,tag-latency", &tag);
> +	if (tag) {
> +		mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
> +		val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
> +	}
> +
> +	of_property_read_u32_array(np, "arm,data-latency",
> +				   data, ARRAY_SIZE(data));
> +	if (data[0] && data[1]) {
> +		mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
> +			L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
> +		val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
> +		       ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
> +	}
> +
> +	of_property_read_u32(np, "arm,dirty-latency", &dirty);
> +	if (dirty) {
> +		mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
> +		val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
> +	}
> +
> +	*aux_val &= ~mask;
> +	*aux_val |= val;
> +	*aux_mask &= ~mask;
> +}
> +
> +static void __init pl310_of_setup(const struct device_node *np,
> +				  __u32 *aux_val, __u32 *aux_mask)
> +{
> +	u32 data[3] = { 0, 0, 0 };
> +	u32 tag[3] = { 0, 0, 0 };
> +	u32 filter[2] = { 0, 0 };
> +
> +	of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
> +	if (tag[0] && tag[1] && tag[2])
> +		writel_relaxed(
> +			((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
> +			((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
> +			((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
> +			l2x0_base + L2X0_TAG_LATENCY_CTRL);
> +
> +	of_property_read_u32_array(np, "arm,data-latency",
> +				   data, ARRAY_SIZE(data));
> +	if (data[0] && data[1] && data[2])
> +		writel_relaxed(
> +			((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
> +			((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
> +			((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
> +			l2x0_base + L2X0_DATA_LATENCY_CTRL);
> +
> +	of_property_read_u32_array(np, "arm,filter-ranges",
> +				   filter, ARRAY_SIZE(filter));
> +	if (filter[0] && filter[1]) {
> +		writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
> +			       l2x0_base + L2X0_ADDR_FILTER_END);
> +		writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN,
> +			       l2x0_base + L2X0_ADDR_FILTER_START);
> +	}
> +}
> +
> +static const struct of_device_id l2x0_ids[] __initconst = {
> +	{ .compatible = "arm,pl310-cache", .data = pl310_of_setup },
> +	{ .compatible = "arm,l220-cache", .data = l2x0_of_setup },
> +	{ .compatible = "arm,l210-cache", .data = l2x0_of_setup },
> +	{}
> +};
> +
> +int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask)
> +{
> +	struct device_node *np;
> +	void (*l2_setup)(const struct device_node *np,
> +		__u32 *aux_val, __u32 *aux_mask);
> +
> +	np = of_find_matching_node(NULL, l2x0_ids);
> +	if (!np)
> +		return -ENODEV;
> +	l2x0_base = of_iomap(np, 0);
> +	if (!l2x0_base)
> +		return -ENOMEM;
> +
> +	/* L2 configuration can only be changed if the cache is disabled */
> +	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
> +		l2_setup = of_match_node(l2x0_ids, np)->data;
> +		if (l2_setup)
> +			l2_setup(np, &aux_val, &aux_mask);
> +	}
> +	l2x0_init(l2x0_base, aux_val, aux_mask);
> +	return 0;
> +}
> +#endif
> -- 
> 1.7.4.1
> 

[PATCH v4 2/2] ARM: l2x0: Add OF based initialization

[Arnd Bergmann]

On Wednesday 06 July 2011 23:02:37 Grant Likely wrote:
> 
> On Wed, Jul 06, 2011 at 03:42:59PM -0500, Rob Herring wrote:
> > From: Rob Herring <rob.herring@calxeda.com>
> > 
> > This adds probing for ARM L2x0 cache controllers via device tree. Support
> > includes the L210, L220, and PL310 controllers. The binding allows setting
> > up cache RAM latencies and filter addresses (PL310 only).
> > 
> > Signed-off-by: Rob Herring <rob.herring@calxeda.com>
> 
> Acked-by: Grant Likely <grant.likely@secretlab.ca>
> 
> By rights, this should go via the arm tree, but it depends on patches
> that are already in devicetree/next.  Arnd, how do you want to handle
> this?  I want to avoid rebasing devicetree/next.

It's outside of the scope of the arm-soc tree really, the l2x0 code
is clearly core arm stuff, so it belongs into Russell's tree.

I think it's best if Russell can provide an Ack for this and you
put it in the tree that already has the dependencies.

	Arnd

[PATCH v4 2/2] ARM: l2x0: Add OF based initialization

[Rob Herring]

Russell,

On 07/06/2011 04:26 PM, Arnd Bergmann wrote:
> On Wednesday 06 July 2011 23:02:37 Grant Likely wrote:
>>
>> On Wed, Jul 06, 2011 at 03:42:59PM -0500, Rob Herring wrote:
>>> From: Rob Herring <rob.herring@calxeda.com>
>>>
>>> This adds probing for ARM L2x0 cache controllers via device tree. Support
>>> includes the L210, L220, and PL310 controllers. The binding allows setting
>>> up cache RAM latencies and filter addresses (PL310 only).
>>>
>>> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
>>
>> Acked-by: Grant Likely <grant.likely@secretlab.ca>
>>
>> By rights, this should go via the arm tree, but it depends on patches
>> that are already in devicetree/next.  Arnd, how do you want to handle
>> this?  I want to avoid rebasing devicetree/next.
> 
> It's outside of the scope of the arm-soc tree really, the l2x0 code
> is clearly core arm stuff, so it belongs into Russell's tree.
> 
> I think it's best if Russell can provide an Ack for this and you
> put it in the tree that already has the dependencies.
> 

Any comments?

Rob

[PATCH v4 2/2] ARM: l2x0: Add OF based initialization

[Rob Herring]

Russell,

On 07/06/2011 04:26 PM, Arnd Bergmann wrote:
> On Wednesday 06 July 2011 23:02:37 Grant Likely wrote:
>>
>> On Wed, Jul 06, 2011 at 03:42:59PM -0500, Rob Herring wrote:
>>> From: Rob Herring <rob.herring@calxeda.com>
>>>
>>> This adds probing for ARM L2x0 cache controllers via device tree. Support
>>> includes the L210, L220, and PL310 controllers. The binding allows setting
>>> up cache RAM latencies and filter addresses (PL310 only).
>>>
>>> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
>>
>> Acked-by: Grant Likely <grant.likely@secretlab.ca>
>>
>> By rights, this should go via the arm tree, but it depends on patches
>> that are already in devicetree/next.  Arnd, how do you want to handle
>> this?  I want to avoid rebasing devicetree/next.
> 
> It's outside of the scope of the arm-soc tree really, the l2x0 code
> is clearly core arm stuff, so it belongs into Russell's tree.
> 
> I think it's best if Russell can provide an Ack for this and you
> put it in the tree that already has the dependencies.
> 

Do you have any objection to this patch or Grant taking it in his tree?

Rob

[PATCH v4 2/2] ARM: l2x0: Add OF based initialization

[Rob Herring]

On 07/06/2011 04:26 PM, Arnd Bergmann wrote:
> On Wednesday 06 July 2011 23:02:37 Grant Likely wrote:
>>
>> On Wed, Jul 06, 2011 at 03:42:59PM -0500, Rob Herring wrote:
>>> From: Rob Herring <rob.herring@calxeda.com>
>>>
>>> This adds probing for ARM L2x0 cache controllers via device tree. Support
>>> includes the L210, L220, and PL310 controllers. The binding allows setting
>>> up cache RAM latencies and filter addresses (PL310 only).
>>>
>>> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
>>
>> Acked-by: Grant Likely <grant.likely@secretlab.ca>
>>
>> By rights, this should go via the arm tree, but it depends on patches
>> that are already in devicetree/next.  Arnd, how do you want to handle
>> this?  I want to avoid rebasing devicetree/next.
> 
> It's outside of the scope of the arm-soc tree really, the l2x0 code
> is clearly core arm stuff, so it belongs into Russell's tree.
> 
> I think it's best if Russell can provide an Ack for this and you
> put it in the tree that already has the dependencies.
> 

As the dependency is in Linus' tree now, I submitted this to Russell's
patch system.

Rob

[PATCH v4 2/2] ARM: l2x0: Add OF based initialization

[Olof Johansson]

On Wed, Jul 6, 2011 at 1:42 PM, Rob Herring <robherring2@gmail.com> wrote:
> From: Rob Herring <rob.herring@calxeda.com>
>
> This adds probing for ARM L2x0 cache controllers via device tree. Support
> includes the L210, L220, and PL310 controllers. The binding allows setting
> up cache RAM latencies and filter addresses (PL310 only).
>
> Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Acked-by: Olof Johansson <olof@lixom.net>


-Olof

[PATCH v4 2/2] ARM: l2x0: Add OF based initialization

[Barry Song]

2011/7/7 Rob Herring <robherring2@gmail.com>:
> From: Rob Herring <rob.herring@calxeda.com>
>
> This adds probing for ARM L2x0 cache controllers via device tree. Support
> includes the L210, L220, and PL310 controllers. The binding allows setting
> up cache RAM latencies and filter addresses (PL310 only).
>
> Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Acked-by: Barry Song <21cnbao@gmail.com>

-barry

[PATCH 1/2] dt: add helper function to read u32 arrays

[Grant Likely]

On Wed, Jul 06, 2011 at 03:42:58PM -0500, Rob Herring wrote:
> From: Rob Herring <rob.herring@calxeda.com>
> 
> Rework of_property_read_u32 to read an array of values. Then
> of_property_read_u32 becomes an inline with array size of 1.
> 
> Also make struct device_node ptr const.
> 
> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
> Cc: Thomas Abraham <thomas.abraham@linaro.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> ---
> 
> Grant, 
> 
> Perhaps you want to roll this into the original patch?

Applied, thanks.  The original is already in devicetree/next, so I've
just applied this on top as a separate commit.

> 
> It would also be nice if there were empty versions of the helpers
> as well.

Go ahead and submit a patch to add them if you need it.

g.

> 
> Rob
> 
>  drivers/of/base.c  |   19 +++++++++++++------
>  include/linux/of.h |   14 ++++++++++++--
>  2 files changed, 25 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/of/base.c b/drivers/of/base.c
> index b8b65fd..745537d 100644
> --- a/drivers/of/base.c
> +++ b/drivers/of/base.c
> @@ -596,32 +596,39 @@ struct device_node *of_find_node_by_phandle(phandle handle)
>  EXPORT_SYMBOL(of_find_node_by_phandle);
>  
>  /**
> - * of_property_read_u32 - Find and read a 32 bit integer from a property
> + * of_property_read_u32_array - Find and read an array of 32 bit integers
> + * from a property.
> + *
>   * @np:		device node from which the property value is to be read.
>   * @propname:	name of the property to be searched.
>   * @out_value:	pointer to return value, modified only if return value is 0.
>   *
> - * Search for a property in a device node and read a 32-bit value from
> + * Search for a property in a device node and read 32-bit value(s) from
>   * it. Returns 0 on success, -EINVAL if the property does not exist,
>   * -ENODATA if property does not have a value, and -EOVERFLOW if the
>   * property data isn't large enough.
>   *
>   * The out_value is modified only if a valid u32 value can be decoded.
>   */
> -int of_property_read_u32(struct device_node *np, char *propname, u32 *out_value)
> +int of_property_read_u32_array(const struct device_node *np, char *propname,
> +			       u32 *out_values, size_t sz)
>  {
>  	struct property *prop = of_find_property(np, propname, NULL);
> +	const __be32 *val;
>  
>  	if (!prop)
>  		return -EINVAL;
>  	if (!prop->value)
>  		return -ENODATA;
> -	if (sizeof(*out_value) > prop->length)
> +	if ((sz * sizeof(*out_values)) > prop->length)
>  		return -EOVERFLOW;
> -	*out_value = be32_to_cpup(prop->value);
> +
> +	val = prop->value;
> +	while (sz--)
> +		*out_values++ = be32_to_cpup(val++);
>  	return 0;
>  }
> -EXPORT_SYMBOL_GPL(of_property_read_u32);
> +EXPORT_SYMBOL_GPL(of_property_read_u32_array);
>  
>  /**
>   * of_property_read_string - Find and read a string from a property
> diff --git a/include/linux/of.h b/include/linux/of.h
> index 4fc4c1b..41f10e2 100644
> --- a/include/linux/of.h
> +++ b/include/linux/of.h
> @@ -195,8 +195,18 @@ extern struct device_node *of_find_node_with_property(
>  extern struct property *of_find_property(const struct device_node *np,
>  					 const char *name,
>  					 int *lenp);
> -extern int of_property_read_u32(struct device_node *np, char *propname,
> -					u32 *out_value);
> +extern int of_property_read_u32_array(const struct device_node *np,
> +				      char *propname,
> +				      u32 *out_values,
> +				      size_t sz);
> +
> +static inline int of_property_read_u32(const struct device_node *np,
> +				       char *propname,
> +				       u32 *out_value)
> +{
> +	return of_property_read_u32_array(np, propname, out_value, 1);
> +}
> +
>  extern int of_property_read_string(struct device_node *np, char *propname,
>  					char **out_string);
>  extern int of_device_is_compatible(const struct device_node *device,
> -- 
> 1.7.4.1
> 

[PATCH 1/2] dt: add helper function to read u32 arrays

[Shawn Guo]

On Wed, Jul 06, 2011 at 02:59:33PM -0600, Grant Likely wrote:
> On Wed, Jul 06, 2011 at 03:42:58PM -0500, Rob Herring wrote:
> > From: Rob Herring <rob.herring@calxeda.com>
> > 
> > Rework of_property_read_u32 to read an array of values. Then
> > of_property_read_u32 becomes an inline with array size of 1.
> > 
> > Also make struct device_node ptr const.
> > 
> > Signed-off-by: Rob Herring <rob.herring@calxeda.com>
> > Cc: Thomas Abraham <thomas.abraham@linaro.org>
> > Cc: Grant Likely <grant.likely@secretlab.ca>
> > ---
> > 
> > Grant, 
> > 
> > Perhaps you want to roll this into the original patch?
> 
> Applied, thanks.  The original is already in devicetree/next, so I've
> just applied this on top as a separate commit.
> 
> > 
> > It would also be nice if there were empty versions of the helpers
> > as well.
> 
> Go ahead and submit a patch to add them if you need it.
> 
I'm adding one into my spi-dt series, as I need it there.

-- 
Regards,
Shawn