From: tushar.behera@linaro.org (Tushar Behera)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2] ARM: EXYNOS4: Add support for ORIGEN board
Date: Thu, 21 Jul 2011 10:10:08 +0530 [thread overview]
Message-ID: <4E27ADA8.2050604@linaro.org> (raw)
In-Reply-To: <CAK9yfHzbfEMTdhBk21o2BXSo_doDmdi9Oh=fStZT5aQVeYsCxw@mail.gmail.com>
On Thursday 21 July 2011 10:02 AM, Sachin Kamat wrote:
> On 21 July 2011 09:27, Tushar Behera<tushar.behera@linaro.org> wrote:
>
>> From: JeongHyeon Kim<jhkim@insignal.co.kr>
>>
>> Insignal's ORIGEN board is based Samsung EXYNOS4210 SoC.
>>
>> Signed-off-by: JeongHyeon Kim<jhkim@insignal.co.kr>
>> Signed-off-by: Tushar Behera<tushar.behera@linaro.org>
>> ---
>>
>> Changes for V2:
>> - Reworked based on Kukjin's comments and rebased to kgene/for-next
>>
>> arch/arm/mach-exynos4/Kconfig | 10 +++
>> arch/arm/mach-exynos4/Makefile | 1 +
>> arch/arm/mach-exynos4/mach-origen.c | 108
>> +++++++++++++++++++++++++++++++++++
>> 3 files changed, 119 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/mach-exynos4/mach-origen.c
>>
>> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
>> index 52fc172..012c034 100644
>> --- a/arch/arm/mach-exynos4/Kconfig
>> +++ b/arch/arm/mach-exynos4/Kconfig
>> @@ -205,6 +205,16 @@ config MACH_NURI
>> help
>> Machine support for Samsung Mobile NURI Board.
>>
>> +config MACH_ORIGEN
>> + bool "ORIGEN"
>> + select CPU_EXYNOS4210
>> + select S3C_DEV_RTC
>> + select S3C_DEV_WDT
>> + select S3C_DEV_HSMMC2
>> + select EXYNOS4_SETUP_SDHCI
>> + help
>> + Machine support for ORIGEN based on Samsung S5PV310
>>
> Use Exynos4(210) instead of S5PV310.
>
Ok.
Hi Kukjin,
Should I re-submit with this change?
>> +
>> endmenu
>>
>> comment "Configuration for HSMMC bus width"
>> diff --git a/arch/arm/mach-exynos4/Makefile
>> b/arch/arm/mach-exynos4/Makefile
>> index 2a0b682..ebec49c 100644
>> --- a/arch/arm/mach-exynos4/Makefile
>> +++ b/arch/arm/mach-exynos4/Makefile
>> @@ -31,6 +31,7 @@ obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
>> obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
>> obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
>> obj-$(CONFIG_MACH_NURI) += mach-nuri.o
>> +obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
>>
>> # device support
>>
>> diff --git a/arch/arm/mach-exynos4/mach-origen.c
>> b/arch/arm/mach-exynos4/mach-origen.c
>> new file mode 100644
>> index 0000000..ed59f86
>> --- /dev/null
>> +++ b/arch/arm/mach-exynos4/mach-origen.c
>> @@ -0,0 +1,108 @@
>> +/* linux/arch/arm/mach-exynos4/mach-origen.c
>> + *
>> + * Copyright (c) 2011 Insignal Co., Ltd.
>> + * http://www.insignal.co.kr/
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include<linux/serial_core.h>
>> +#include<linux/gpio.h>
>> +#include<linux/mmc/host.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/io.h>
>> +#include<linux/input.h>
>> +
>> +#include<asm/mach/arch.h>
>> +#include<asm/mach-types.h>
>> +
>> +#include<plat/regs-serial.h>
>> +#include<plat/exynos4.h>
>> +#include<plat/cpu.h>
>> +#include<plat/devs.h>
>> +#include<plat/sdhci.h>
>> +#include<plat/iic.h>
>> +
>> +#include<mach/map.h>
>> +
>> +/* Following are default values for UCON, ULCON and UFCON UART registers
>> */
>> +#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
>> + S3C2410_UCON_RXILEVEL | \
>> + S3C2410_UCON_TXIRQMODE | \
>> + S3C2410_UCON_RXIRQMODE | \
>> + S3C2410_UCON_RXFIFO_TOI | \
>> + S3C2443_UCON_RXERR_IRQEN)
>> +
>> +#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
>> +
>> +#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
>> + S5PV210_UFCON_TXTRIG4 | \
>> + S5PV210_UFCON_RXTRIG4)
>> +
>> +static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
>> + [0] = {
>> + .hwport = 0,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> + [1] = {
>> + .hwport = 1,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> + [2] = {
>> + .hwport = 2,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> + [3] = {
>> + .hwport = 3,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> +};
>> +
>> +static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
>> + .cd_type = S3C_SDHCI_CD_GPIO,
>> + .ext_cd_gpio = EXYNOS4_GPK2(2),
>> + .ext_cd_gpio_invert = 1,
>> + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
>> +};
>> +
>> +static struct platform_device *origen_devices[] __initdata = {
>> +&s3c_device_hsmmc2,
>> +&s3c_device_rtc,
>> +&s3c_device_wdt,
>> +};
>> +
>> +static void __init origen_map_io(void)
>> +{
>> + s5p_init_io(NULL, 0, S5P_VA_CHIPID);
>> + s3c24xx_init_clocks(24000000);
>> + s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
>> +}
>> +
>> +static void __init origen_machine_init(void)
>> +{
>> + s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
>> + platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
>> +}
>> +
>> +MACHINE_START(ORIGEN, "ORIGEN")
>> + /* Maintainer: JeongHyeon Kim<jhkim@insignal.co.kr> */
>> + .boot_params = S5P_PA_SDRAM + 0x100,
>> + .init_irq = exynos4_init_irq,
>> + .map_io = origen_map_io,
>> + .init_machine = origen_machine_init,
>> + .timer =&exynos4_timer,
>> +MACHINE_END
>> --
>> 1.7.4.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-samsung-soc" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
>
--
Tushar Behera
next prev parent reply other threads:[~2011-07-21 4:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-21 3:57 [PATCH V2] ARM: EXYNOS4: Add support for ORIGEN board Tushar Behera
[not found] ` <CAK9yfHzbfEMTdhBk21o2BXSo_doDmdi9Oh=fStZT5aQVeYsCxw@mail.gmail.com>
2011-07-21 4:40 ` Tushar Behera [this message]
2011-07-21 7:53 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E27ADA8.2050604@linaro.org \
--to=tushar.behera@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox