[PATCH 1/6] ARM: highbank: add devicetree source

[robherring2@gmail.com (Rob Herring)]

Shawn,

On 08/17/2011 02:27 AM, Shawn Guo wrote:
> Hi Rob,
> 
> On Tue, Aug 16, 2011 at 03:34:53PM -0500, Rob Herring wrote:
>> From: Rob Herring <rob.herring@calxeda.com>
>>
>> This adds the devicetree source and documentation for the Calxeda highbank
>> platform.
>>
>> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
>> ---
>>  Documentation/devicetree/bindings/arm/calxeda.txt |    8 +
>>  arch/arm/boot/dts/highbank.dts                    |  212 +++++++++++++++++++++
>>  2 files changed, 220 insertions(+), 0 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/arm/calxeda.txt
>>  create mode 100644 arch/arm/boot/dts/highbank.dts
>>
>> diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt
>> new file mode 100644
>> index 0000000..4755caa
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/calxeda.txt
>> @@ -0,0 +1,8 @@
>> +Calxeda Highbank Platforms Device Tree Bindings
>> +-----------------------------------------------
>> +
>> +Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
>> +properties.
>> +
>> +Required root node properties:
>> +    - compatible = "calxeda,highbank";
>> diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
>> new file mode 100644
>> index 0000000..2dd3b7b
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/highbank.dts
>> @@ -0,0 +1,212 @@
>> +/*
>> + * Copyright 2011 Calxeda, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +/* First 4KB has pen for secondary cores. */
>> +/memreserve/ 0x00000000 0x0001000;
>> +
> I failed to find the "pen" handling in the whole patch series.  Am I
> missing anything?
> 

In highbank.c:

+#define HB_JUMP_TABLE_PHYS(cpu)		(0x40 + (0x10 * (cpu)))
+#define HB_JUMP_TABLE_VIRT(cpu)		phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
+
+void highbank_set_cpu_jump(int cpu, void *jump_addr)
+{
+	writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
+	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
+	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
+			  HB_JUMP_TABLE_PHYS(cpu) + 15);
+}

Rob