From: santosh.shilimkar@ti.com (Santosh Shilimkar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Date: Fri, 07 Oct 2011 23:50:04 +0530 [thread overview]
Message-ID: <4E8F42D4.7030502@ti.com> (raw)
In-Reply-To: <20111007181621.GJ6324@atomide.com>
On Friday 07 October 2011 11:46 PM, Tony Lindgren wrote:
> * Santosh Shilimkar <santosh.shilimkar@ti.com> [111007 10:05]:
>>
>> I initially tried some thing similar but the issue was GP and
>> HS devices. SRAM_PA isn't same on GP and EMU device and hence
>> did that dynamically. One way is I can make GP and HS
>> device SRAM_PA same for OMAP4 (Will loose 16 KB of
>> SRAM on OMAP4 GP). It's ok to loose that 16 KB SRAM
>> for OMAP4 with errata enabled.
>
> Oh yeah, the beginning is different too, I forgot that.
>
>> Below change works on both GP and HS device
>> If you are OK with it, I can update errata patch accordingly.
>
> OK to me to loose 16KB when the errata is enabled. That can
> be fixed later on for example by passing the SRAM area from
> device tree.
>
Yep.
> I assume now you can add the mapping to io.c instead? If so,
> then it's easier to apply the patches whatever way makes more
> sense.
>
io.c change I took as you suggested. The below change on top
of it. I just updated PM branch with this change.
Thanks for the tip. The errata code looks bit more clean
now. :)
Regards
Santosh
next prev parent reply other threads:[~2011-10-07 18:20 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-05 0:45 [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec() Tony Lindgren
2011-10-05 0:45 ` [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY Tony Lindgren
2011-10-05 1:00 ` Nicolas Pitre
2011-10-05 22:06 ` Tony Lindgren
2011-10-05 22:08 ` [PATCH 1.5/4] ARM: OMAP1: Use generic map_io, init_early and init_irq Tony Lindgren
2011-10-07 6:40 ` [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY Santosh Shilimkar
2011-10-07 14:43 ` Tony Lindgren
2011-10-07 15:03 ` Santosh Shilimkar
2011-10-07 15:11 ` Tony Lindgren
2011-10-07 17:39 ` Santosh Shilimkar
2011-10-07 18:16 ` Tony Lindgren
2011-10-07 18:20 ` Santosh Shilimkar [this message]
2011-10-07 18:27 ` Tony Lindgren
2011-10-05 0:45 ` [PATCH 2/4] ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done Tony Lindgren
2011-10-07 6:47 ` Santosh Shilimkar
2011-10-05 0:45 ` [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer Tony Lindgren
2011-10-05 6:45 ` Tomi Valkeinen
2011-10-05 22:41 ` Tony Lindgren
2011-10-06 8:38 ` Tomi Valkeinen
2011-10-06 16:22 ` Tony Lindgren
2011-10-05 0:45 ` [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec() Tony Lindgren
2011-10-05 1:07 ` Nicolas Pitre
2011-10-05 22:13 ` Tony Lindgren
2011-10-05 23:01 ` Nicolas Pitre
2011-10-07 6:52 ` Santosh Shilimkar
2011-10-07 14:55 ` Tony Lindgren
2011-10-05 1:40 ` [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early Tony Lindgren
2011-10-05 1:51 ` Nicolas Pitre
2011-10-06 1:36 ` Tony Lindgren
2011-10-07 6:56 ` Santosh Shilimkar
2011-10-07 14:54 ` Tony Lindgren
2011-10-07 23:26 ` Nicolas Pitre
2011-10-05 7:03 ` [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec() Santosh Shilimkar
2011-10-06 1:42 ` Tony Lindgren
2011-10-07 6:59 ` Santosh Shilimkar
2011-10-07 14:45 ` Tony Lindgren
2011-10-07 20:23 ` Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E8F42D4.7030502@ti.com \
--to=santosh.shilimkar@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).