[PATCH 2/3 RESEND] ARM: pxa: Add DT testing machine

[robherring2@gmail.com (Rob Herring)]

On 11/07/2011 03:31 PM, Marek Vasut wrote:
> I use the Voipac PXA270 board for PXA DT conversion. This board is a helper for
> the conversion to go smoothly and the testing to be easy.
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Rob Herring <robherring2@gmail.com>
> ---
>  arch/arm/mach-pxa/Kconfig      |   15 +++++++
>  arch/arm/mach-pxa/Makefile     |    3 +
>  arch/arm/mach-pxa/vpac270-dt.c |   82 ++++++++++++++++++++++++++++++++++++++++
>  arch/arm/mach-pxa/vpac270.c    |    2 +
>  4 files changed, 102 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-pxa/vpac270-dt.c
> 
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index 61d3c72..a9bba3d 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -616,6 +616,21 @@ config MACH_ZIPIT2
>  	bool "Zipit Z2 Handheld"
>  	select PXA27x
>  	select HAVE_PWM

Add a blank line.

> +config MACH_VPAC_DT
> +	bool "PXA (Voipac270) FDT Machine"

This should be more generic to be all PXA DT machines.

> +	select PXA27x
> +	select OF
> +	depends on !MACH_VPAC270 && EXPERIMENTAL

Drop these depends.

> +	help
> +	  PXA Device Tree Machine.
> +	  This is to be a generic machine which probes all of it's drivers
> +	  using the Flattened Device Tree blob. This is work-in-progress
> +	  so don't expect much yet. We selected the Voipac PXA270 device
> +	  as a base device to test support along the way.
> +
> +	  NOTE: This platform is mutually exclusive with the original!

It shouldn't need to be.

> +	  NOTE: Use only if you know what you're doing!!
> +
>  endif
>  endmenu
>  
> diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
> index be0f7df..2b80829 100644
> --- a/arch/arm/mach-pxa/Makefile
> +++ b/arch/arm/mach-pxa/Makefile
> @@ -104,3 +104,6 @@ led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
>  obj-$(CONFIG_LEDS)		+= $(led-y)
>  
>  obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
> +
> +# PXA FDT board
> +obj-$(CONFIG_MACH_VPAC_DT)	+= vpac270-dt.o
> diff --git a/arch/arm/mach-pxa/vpac270-dt.c b/arch/arm/mach-pxa/vpac270-dt.c
> new file mode 100644
> index 0000000..dc9a6dd
> --- /dev/null
> +++ b/arch/arm/mach-pxa/vpac270-dt.c
> @@ -0,0 +1,82 @@
> +/*
> + * Hardware definitions for Voipac PXA270 driven by FDT
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + *
> + * NOTE: This is an ongoing effort of preparing generic FDT-based board
> + *       for PXA machines. This particular device allows us to test the
> + *       support for breakage.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/of_platform.h>
> +#include <linux/irqdomain.h>
> +#include "vpac270.c"
> +
> +/******************************************************************************
> + * Machine init
> + ******************************************************************************/
> +static const struct of_device_id pxairq_of_match[] __initconst = {
> +	{ .compatible = "marvell,pxa-irq", },
> +	{},
> +};
> +
> +static void __init pxa_dt_init_irq(void)
> +{
> +	irq_domain_generate_simple(pxairq_of_match, 0x40d00000, 0);
> +	pxa27x_init_irq();

Ideally the interrupt controller itself would be converted over to
support domains and DT init.

> +}
> +
> +static struct of_device_id pxa_dt_match_table[] __initdata = {
> +	{ .compatible = "simple-bus", },
> +	{}
> +};

Any reason you can't use the default table?

> +
> +static const struct of_dev_auxdata pxa_dt_auxdata_table[] __initconst = {
> +	OF_DEV_AUXDATA("marvell,pxa2xx-uart", 0x40100000, "pxa2xx-uart.0", NULL),
> +	OF_DEV_AUXDATA("marvell,pxa2xx-uart", 0x40200000, "pxa2xx-uart.1", NULL),
> +	OF_DEV_AUXDATA("marvell,pxa2xx-uart", 0x40700000, "pxa2xx-uart.2", NULL),
> +};

Is this for clkdev? If so, you can just add additional lookups using the
DT device name.

> +
> +static void __init vpac270_dt_init(void)
> +{
> +	pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
> +
> +	of_platform_populate(NULL, pxa_dt_match_table,
> +				pxa_dt_auxdata_table, NULL);
> +
> +	pxa_set_i2c_info(NULL);
> +	pxa27x_set_i2c_power_info(NULL);
> +
> +	vpac270_pmic_init();
> +	vpac270_lcd_init();
> +	vpac270_mmc_init();
> +	vpac270_nor_init();
> +	vpac270_onenand_init();
> +	vpac270_leds_init();
> +	vpac270_keys_init();
> +	vpac270_uhc_init();
> +	vpac270_udc_init();
> +	vpac270_eth_init();
> +	vpac270_ts_init();
> +	vpac270_rtc_init();
> +	vpac270_ide_init();

Generally, devices get added as they are converted to use DT.

> +}
> +
> +static const char *vpac270_dt_board_compat[] __initdata = {
> +	"voipac,vpac270",
> +	NULL
> +};
> +
> +DT_MACHINE_START(PXA_DT, "Marvell PXA2xx/PXA3xx (Flattened Device Tree)")
> +	.map_io		= pxa27x_map_io,
> +	.init_irq	= pxa_dt_init_irq,
> +	.handle_irq	= pxa27x_handle_irq,
> +	.timer		= &pxa_timer,
> +	.init_machine	= vpac270_dt_init,
> +	.dt_compat	= vpac270_dt_board_compat,
> +MACHINE_END
> diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
> index a7539a6..339ecdf 100644
> --- a/arch/arm/mach-pxa/vpac270.c
> +++ b/arch/arm/mach-pxa/vpac270.c
> @@ -715,6 +715,7 @@ static void __init vpac270_init(void)
>  	vpac270_ide_init();
>  }
>  
> +#ifndef	CONFIG_MACH_VPAC_DT
>  MACHINE_START(VPAC270, "Voipac PXA270")
>  	.atag_offset	= 0x100,
>  	.map_io		= pxa27x_map_io,
> @@ -723,3 +724,4 @@ MACHINE_START(VPAC270, "Voipac PXA270")
>  	.timer		= &pxa_timer,
>  	.init_machine	= vpac270_init
>  MACHINE_END
> +#endif

You shouldn't need this ifndef.

Rob