From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4
Date: Fri, 11 Nov 2011 16:30:19 -0600 [thread overview]
Message-ID: <4EBDA1FB.9040800@gmail.com> (raw)
In-Reply-To: <1321036026-23411-6-git-send-email-pawel.moll@arm.com>
Pawel,
Just a few comments:
On 11/11/2011 12:27 PM, Pawel Moll wrote:
> This patch adds Device Trees for ARM Ltd. CoreTile Express A5x2
> and CoreTile Express A9x4 used with V2M motherboard and an initial
> implementation of the DT machine support (this code is separate
> from the current core tile code).
>
> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
> ---
> arch/arm/boot/dts/vexpress-v2p-ca5s.dts | 132 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/vexpress-v2p-ca9.dts | 146 +++++++++++++++++++++++++++++++
> arch/arm/mach-vexpress/Kconfig | 15 +++
> arch/arm/mach-vexpress/Makefile | 1 +
> arch/arm/mach-vexpress/v2p-ca5s_ca9.c | 103 ++++++++++++++++++++++
> 5 files changed, 397 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> create mode 100644 arch/arm/boot/dts/vexpress-v2p-ca9.dts
> create mode 100644 arch/arm/mach-vexpress/v2p-ca5s_ca9.c
>
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> new file mode 100644
> index 0000000..d88aa0a
> --- /dev/null
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
> @@ -0,0 +1,132 @@
> +/*
> + * ARM Ltd. Versatile Express
> + *
> + * CoreTile Express A5x2
> + * Cortex-A5 MPCore (V2P-CA5s)
> + *
> + * HBI-0225B
> + */
> +
> +/dts-v1/;
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + model = "V2P-CA5s";
> + arm,hbi = <0x225>;
> + compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + serial0 = &mb_serial0;
> + serial1 = &mb_serial1;
> + serial2 = &mb_serial2;
> + serial3 = &mb_serial3;
> + i2c0 = &mb_i2c_dvi;
> + i2c1 = &mb_i2c_pcie;
> + timer = &mb_timer01;
> + };
> +
> + memory at 80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x40000000>;
> + };
> +
> + hdlcd at 2a110000 {
> + compatible = "arm,hdlcd";
> + reg = <0x2a110000 0x1000>;
> + interrupts = <0 85 4>;
> + };
> +
> + dmc at 2a150000 {
I missed this earlier, but the preferred generic name is "memory-controller"
> + compatible = "arm,pl341", "arm,primecell";
> + reg = <0x2a150000 0x1000>;
> + };
> +
> + smc at 2a190000 {
same here.
> + compatible = "arm,pl354", "arm,primecell";
> + reg = <0x2a190000 0x1000>;
> + interrupts = <0 86 4>,
> + <0 87 4>;
> + };
> +
> + gic: interrupt-controller at 2c001000 {
> + compatible = "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0x2c001000 0x1000>,
> + <0x2c000100 0x100>;
> + };
> +
> + L2: cache-controller at 2c0f0000 {
> + compatible = "arm,pl310-cache";
> + reg = <0x2c0f0000 0x1000>;
> + interrupts = <0 84 4>;
> + cache-level = <2>;
> + arm,data-latency = <0>;
> + arm,tag-latency = <0>;
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a9-pmu";
> + interrupts = <0 68 4>,
> + <0 69 4>;
> + };
> +
> + motherboard {
> + ranges = <0 0 0x08000000 0x04000000>,
> + <1 0 0x14000000 0x04000000>,
> + <2 0 0x18000000 0x04000000>,
> + <3 0 0x1c000000 0x04000000>,
> + <4 0 0x0c000000 0x04000000>,
> + <5 0 0x10000000 0x04000000>;
> +
> + interrupt-map-mask = <0 0 63>;
> + interrupt-map = <0 0 0 &gic 0 0 4>,
> + <0 0 1 &gic 0 1 4>,
> + <0 0 2 &gic 0 2 4>,
> + <0 0 3 &gic 0 3 4>,
> + <0 0 4 &gic 0 4 4>,
> + <0 0 5 &gic 0 5 4>,
> + <0 0 6 &gic 0 6 4>,
> + <0 0 7 &gic 0 7 4>,
> + <0 0 8 &gic 0 8 4>,
> + <0 0 9 &gic 0 9 4>,
> + <0 0 10 &gic 0 10 4>,
> + <0 0 11 &gic 0 11 4>,
> + <0 0 12 &gic 0 12 4>,
> + <0 0 13 &gic 0 13 4>,
> + <0 0 14 &gic 0 14 4>,
> + <0 0 15 &gic 0 15 4>,
> + <0 0 16 &gic 0 16 4>,
> + <0 0 17 &gic 0 17 4>,
> + <0 0 18 &gic 0 18 4>,
> + <0 0 19 &gic 0 19 4>,
> + <0 0 20 &gic 0 20 4>,
> + <0 0 21 &gic 0 21 4>,
> + <0 0 22 &gic 0 22 4>,
> + <0 0 23 &gic 0 23 4>,
> + <0 0 24 &gic 0 24 4>,
> + <0 0 25 &gic 0 25 4>,
> + <0 0 26 &gic 0 26 4>,
> + <0 0 27 &gic 0 27 4>,
> + <0 0 28 &gic 0 28 4>,
> + <0 0 29 &gic 0 29 4>,
> + <0 0 30 &gic 0 30 4>,
> + <0 0 31 &gic 0 31 4>,
> + <0 0 32 &gic 0 32 4>,
> + <0 0 33 &gic 0 33 4>,
> + <0 0 34 &gic 0 34 4>,
> + <0 0 35 &gic 0 35 4>,
> + <0 0 36 &gic 0 36 4>,
> + <0 0 37 &gic 0 37 4>,
> + <0 0 38 &gic 0 38 4>,
> + <0 0 39 &gic 0 39 4>,
> + <0 0 40 &gic 0 40 4>,
> + <0 0 41 &gic 0 41 4>,
> + <0 0 42 &gic 0 42 4>;
> + };
> +};
> +
> +/include/ "vexpress-v2m-rs1.dtsi"
> diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
> new file mode 100644
> index 0000000..0f26cba
> --- /dev/null
> +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
> @@ -0,0 +1,146 @@
> +/*
> + * ARM Ltd. Versatile Express
> + *
> + * CoreTile Express A9x4
> + * Cortex-A9 MPCore (V2P-CA9)
> + *
> + * HBI-0191B
> + */
> +
> +/dts-v1/;
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + model = "V2P-CA9";
> + arm,hbi = <0x191>;
> + compatible = "arm,vexpress-v2p-ca9", "arm,vexpress-legacy", "arm,vexpress";
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + serial0 = &mb_serial0;
> + serial1 = &mb_serial1;
> + serial2 = &mb_serial2;
> + serial3 = &mb_serial3;
> + i2c0 = &mb_i2c_dvi;
> + i2c1 = &mb_i2c_pcie;
> + timer = &mb_timer01;
> + };
> +
> + memory at 60000000 {
> + device_type = "memory";
> + reg = <0x60000000 0x40000000>;
> + };
> +
> + clcd at 10020000 {
> + compatible = "arm,pl111", "arm,primecell";
> + reg = <0x10020000 0x1000>;
> + interrupts = <0 44 4>;
> + };
> +
> + dmc at 100e0000 {
> + compatible = "arm,pl341", "arm,primecell";
> + reg = <0x100e0000 0x1000>;
> + };
> +
> + smc at 100e1000 {
> + compatible = "arm,pl354", "arm,primecell";
> + reg = <0x100e1000 0x1000>;
> + interrupts = <0 45 4>,
> + <0 46 4>;
> + };
> +
> + timer at 100e4000 {
> + compatible = "arm,sp804", "arm,primecell";
> + reg = <0x100e4000 0x1000>;
> + interrupts = <0 48 4>,
> + <0 49 4>;
> + };
> +
> + watchdog at 100e5000 {
> + compatible = "arm,sp805", "arm,primecell";
> + reg = <0x100e5000 0x1000>;
> + interrupts = <0 51 4>;
> + };
> +
> + gic: interrupt-controller at 1e001000 {
> + compatible = "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0x1e001000 0x1000>,
> + <0x1e000100 0x100>;
> + };
> +
> + L2: cache-controller at 1e00a000 {
> + compatible = "arm,pl310-cache";
> + reg = <0x1e00a000 0x1000>;
> + interrupts = <0 43 4>;
> + cache-level = <2>;
> + arm,data-latency = <0>;
> + arm,tag-latency = <0>;
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a9-pmu";
> + interrupts = <0 60 4>,
> + <0 61 4>,
> + <0 62 4>,
> + <0 63 4>;
> + };
> +
> + motherboard {
> + ranges = <0 0 0x40000000 0x04000000>,
> + <1 0 0x44000000 0x04000000>,
> + <2 0 0x48000000 0x04000000>,
> + <3 0 0x4c000000 0x04000000>,
> + <7 0 0x10000000 0x00020000>;
> +
> + interrupt-map-mask = <0 0 63>;
> + interrupt-map = <0 0 0 &gic 0 0 4>,
> + <0 0 1 &gic 0 1 4>,
> + <0 0 2 &gic 0 2 4>,
> + <0 0 3 &gic 0 3 4>,
> + <0 0 4 &gic 0 4 4>,
> + <0 0 5 &gic 0 5 4>,
> + <0 0 6 &gic 0 6 4>,
> + <0 0 7 &gic 0 7 4>,
> + <0 0 8 &gic 0 8 4>,
> + <0 0 9 &gic 0 9 4>,
> + <0 0 10 &gic 0 10 4>,
> + <0 0 11 &gic 0 11 4>,
> + <0 0 12 &gic 0 12 4>,
> + <0 0 13 &gic 0 13 4>,
> + <0 0 14 &gic 0 14 4>,
> + <0 0 15 &gic 0 15 4>,
> + <0 0 16 &gic 0 16 4>,
> + <0 0 17 &gic 0 17 4>,
> + <0 0 18 &gic 0 18 4>,
> + <0 0 19 &gic 0 19 4>,
> + <0 0 20 &gic 0 20 4>,
> + <0 0 21 &gic 0 21 4>,
> + <0 0 22 &gic 0 22 4>,
> + <0 0 23 &gic 0 23 4>,
> + <0 0 24 &gic 0 24 4>,
> + <0 0 25 &gic 0 25 4>,
> + <0 0 26 &gic 0 26 4>,
> + <0 0 27 &gic 0 27 4>,
> + <0 0 28 &gic 0 28 4>,
> + <0 0 29 &gic 0 29 4>,
> + <0 0 30 &gic 0 30 4>,
> + <0 0 31 &gic 0 31 4>,
> + <0 0 32 &gic 0 32 4>,
> + <0 0 33 &gic 0 33 4>,
> + <0 0 34 &gic 0 34 4>,
> + <0 0 35 &gic 0 35 4>,
> + <0 0 36 &gic 0 36 4>,
> + <0 0 37 &gic 0 37 4>,
> + <0 0 38 &gic 0 38 4>,
> + <0 0 39 &gic 0 39 4>,
> + <0 0 40 &gic 0 40 4>,
> + <0 0 41 &gic 0 41 4>,
> + <0 0 42 &gic 0 42 4>;
> + };
> +};
> +
> +/include/ "vexpress-v2m-legacy.dtsi"
> diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
> index d1b0f35..6b79400 100644
> --- a/arch/arm/mach-vexpress/Kconfig
> +++ b/arch/arm/mach-vexpress/Kconfig
> @@ -22,4 +22,19 @@ config ARCH_VEXPRESS_DT
> bool
> select OF
>
> +config ARCH_VEXPRESS_V2P_CA5S_CA9
You don't expect this to expand to A7 or A15? Why is ARCH_VEXPRESS_DT
not sufficient?
Rob
> + bool "DT: CoreTiles Express A5x2 and A9x4"
> + select ARCH_VEXPRESS_RS1
> + select ARCH_VEXPRESS_DT
> + select ARM_ERRATA_720789
> + select ARM_ERRATA_751472
> + select ARM_ERRATA_753970
> + help
> + This option enabled Device Tree based support for
> + CoreTile Express A5x2 (V2P-CA5s) and
> + CoreTile Express A9x4 (V2P-CA9).
> +
> + Note that you must provide kernel with a valid DTB
> + for the board if you want to use this option.
> +
> endmenu
> diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
> index 90551b9..06e3687 100644
> --- a/arch/arm/mach-vexpress/Makefile
> +++ b/arch/arm/mach-vexpress/Makefile
> @@ -4,5 +4,6 @@
>
> obj-y := v2m.o
> obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
> +obj-$(CONFIG_ARCH_VEXPRESS_V2P_CA5S_CA9) += v2p-ca5s_ca9.o
> obj-$(CONFIG_SMP) += platsmp.o
> obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
> diff --git a/arch/arm/mach-vexpress/v2p-ca5s_ca9.c b/arch/arm/mach-vexpress/v2p-ca5s_ca9.c
> new file mode 100644
> index 0000000..0f1cd9b
> --- /dev/null
> +++ b/arch/arm/mach-vexpress/v2p-ca5s_ca9.c
> @@ -0,0 +1,103 @@
> +/*
> + * Device Tree based support for ARM Versatile Express platform using:
> + * - CoreTile Express A5x2 (V2P-CA5s)
> + * - CoreTile Express A9x4 (V2P-CA9)
> + */
> +
> +#include <linux/init.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/smp_scu.h>
> +#include <asm/smp_twd.h>
> +#include <asm/hardware/cache-l2x0.h>
> +#include <asm/hardware/gic.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +
> +#include "core.h"
> +
> +#define A5_MPCORE_SCU 0x0000
> +#define A5_MPCORE_TWD 0x0600
> +
> +static struct map_desc v2p_ca5s_ca9_io_desc[] __initdata = {
> + {
> + .virtual = V2T_PERIPH,
> + /* .pfn set in v2p_ca5s_ca9_map_io() */
> + .length = SZ_8K,
> + .type = MT_DEVICE,
> + },
> +};
> +
> +#ifdef CONFIG_SMP
> +static void v2p_ca5s_ca9_init_cpu_map(void)
> +{
> + int i, ncores = scu_get_core_count(V2T_PERIPH_P2V(A5_MPCORE_SCU));
> +
> + for (i = 0; i < ncores; ++i)
> + set_cpu_possible(i, true);
> +
> + set_smp_cross_call(gic_raise_softirq);
> +}
> +
> +static void v2p_ca5s_ca9_smp_enable(unsigned int max_cpus)
> +{
> + scu_enable(V2T_PERIPH_P2V(A5_MPCORE_SCU));
> +}
> +#endif
> +
> +static void __init v2p_ca5s_ca9_map_io(void)
> +{
> + u32 mpcore_periph;
> +
> + asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph));
> + v2p_ca5s_ca9_io_desc[0].pfn = __phys_to_pfn(mpcore_periph);
> + iotable_init(v2p_ca5s_ca9_io_desc, ARRAY_SIZE(v2p_ca5s_ca9_io_desc));
> +
> + v2m_dt_map_io();
> +
> +#ifdef CONFIG_SMP
> + vexpress_init_cpu_map = v2p_ca5s_ca9_init_cpu_map;
> + vexpress_smp_enable = v2p_ca5s_ca9_smp_enable;
> +#endif
> +}
> +
> +static void __init v2p_ca5s_ca9_init_early(void)
> +{
> +#ifdef CONFIG_LOCAL_TIMERS
> + twd_base = V2T_PERIPH_P2V(A5_MPCORE_TWD);
> +#endif
> + v2m_dt_init_early();
> +}
> +
> +const static struct of_device_id v2p_ca5s_ca9_irq_match[] = {
> + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
> + {}
> +};
> +
> +static void __init v2p_ca5s_ca9_init_irq(void)
> +{
> + of_irq_init(v2p_ca5s_ca9_irq_match);
> +}
> +
> +static void __init v2p_ca5s_ca9_init(void)
> +{
> + l2x0_of_init(0x00400000, 0xfe0fffff);
> + of_platform_populate(NULL, of_default_bus_match_table,
> + v2m_dt_get_auxdata(), NULL);
> +}
> +
> +static const char *v2p_ca5s_ca9_dt_match[] __initdata = {
> + "arm,vexpress-v2p-ca5s",
> + "arm,vexpress-v2p-ca9",
> + NULL,
> +};
> +
> +DT_MACHINE_START(VEXPRESS_V2P_CA5S_CA9, "ARM Versatile Express")
> + .map_io = v2p_ca5s_ca9_map_io,
> + .init_early = v2p_ca5s_ca9_init_early,
> + .init_irq = v2p_ca5s_ca9_init_irq,
> + .timer = &v2m_timer,
> + .init_machine = v2p_ca5s_ca9_init,
> + .dt_compat = v2p_ca5s_ca9_dt_match,
> +MACHINE_END
next prev parent reply other threads:[~2011-11-11 22:30 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-11 18:27 [PATCH 0/5] Versatile Express DT support, take 2 Pawel Moll
2011-11-11 18:27 ` [PATCH 1/5] ARM: vexpress: Get rid of MMIO_P2V Pawel Moll
2011-11-16 15:35 ` Dave Martin
2011-11-16 16:16 ` Pawel Moll
2011-11-16 17:28 ` Dave Martin
2011-11-16 17:30 ` Pawel Moll
2011-11-17 7:02 ` Ryan Harkin
2011-11-17 15:43 ` Russell King - ARM Linux
2011-11-18 12:20 ` Pawel Moll
2011-11-18 17:44 ` Russell King - ARM Linux
2011-11-11 18:27 ` [PATCH 2/5] ARM: vexpress: Remove platform SMP functions from ct_desc Pawel Moll
2011-11-17 15:31 ` Russell King - ARM Linux
2011-11-18 12:20 ` Pawel Moll
2011-11-11 18:27 ` [PATCH 3/5] ARM: vexpress: Add DT support in v2m Pawel Moll
2011-11-16 15:44 ` Dave Martin
2011-11-16 16:26 ` Rob Herring
2011-11-16 16:37 ` Pawel Moll
2011-11-16 16:59 ` Rob Herring
2011-11-16 17:07 ` Pawel Moll
2011-11-16 17:37 ` Pawel Moll
2011-11-16 19:14 ` Dave Martin
2011-11-16 17:39 ` Dave Martin
2011-11-16 17:50 ` Dave Martin
2011-11-16 17:55 ` Pawel Moll
2011-11-17 15:53 ` Russell King - ARM Linux
2011-11-18 12:20 ` Pawel Moll
2011-11-18 17:49 ` Russell King - ARM Linux
2011-11-16 16:35 ` Pawel Moll
2011-11-16 17:57 ` Dave Martin
2011-11-17 13:50 ` Pawel Moll
2011-11-17 14:41 ` Dave Martin
2011-11-17 16:05 ` Russell King - ARM Linux
2011-11-17 18:37 ` Dave Martin
2011-11-18 17:52 ` Russell King - ARM Linux
2011-11-18 12:20 ` Pawel Moll
2011-11-11 18:27 ` [PATCH 4/5] ARM: vexpress: Initial RS1 memory map support Pawel Moll
2011-11-16 15:42 ` Dave Martin
2011-11-16 16:28 ` Pawel Moll
2011-11-16 18:03 ` Dave Martin
2011-11-17 15:36 ` Russell King - ARM Linux
2011-11-18 12:20 ` Pawel Moll
2011-11-18 17:56 ` Russell King - ARM Linux
2011-11-11 18:27 ` [PATCH 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4 Pawel Moll
2011-11-11 22:30 ` Rob Herring [this message]
2011-11-11 22:54 ` Pawel Moll
2011-11-16 15:36 ` Dave Martin
2011-11-16 16:22 ` Pawel Moll
2011-11-16 18:17 ` Dave Martin
2011-11-16 15:33 ` [PATCH 0/5] Versatile Express DT support, take 2 Dave Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EBDA1FB.9040800@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).