[PATCH] ARM: pxa168/gplugd: add the correct SSP device

[tanmay.upadhyay@einfochips.com (Tanmay Upadhyay)]

On Monday 14 November 2011 09:51 AM, Eric Miao wrote:
> On Sat, Nov 12, 2011 at 12:02 AM, Tanmay Upadhyay
> <tanmay.upadhyay@einfochips.com>  wrote:
>>
>> On Friday 11 November 2011 05:49 PM, Eric Miao wrote:
>>> There is no SSP0, but SSP2 is used on gplugd.
>>>
>>> Cc: Tanmay Upadhyay<tanmay.upadhyay@einfochips.com>
>>> Signed-off-by: Eric Miao<eric.y.miao@gmail.com>
>>> ---
>>>   arch/arm/mach-mmp/gplugd.c |    2 +-
>>>   1 files changed, 1 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
>>> index 6915656..0469c74 100644
>>> --- a/arch/arm/mach-mmp/gplugd.c
>>> +++ b/arch/arm/mach-mmp/gplugd.c
>>> @@ -182,7 +182,7 @@ static void __init gplugd_init(void)
>>>
>>>         /* on-chip devices */
>>>         pxa168_add_uart(3);
>>> -       pxa168_add_ssp(0);
>>> +       pxa168_add_ssp(2);
>>>         pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
>>>
>>>         pxa168_add_eth(&gplugd_eth_platform_data);
>> Hi Eric,
>>
>> HDMI chip (TDA9981A) on gplugD gets audio data from SSP0 - used as I2S. Page
>> # 7 of [1]&  page # 1&  3 of [2] indicates this.
> Shouldn't this be SSP1 instead, if following the public PXA168 software
> manual (there is no SSP0, and the existing code doesn't suppport it)

Ah! My bad! You are right. Current code doesn't support SSP0. It just 
starts from 1! Sorry I just missed it. :(

>> SSP2 is also used on gplugD
>> as SPI to talk to the NOR flash.
> If ignoring this port at this moment, how about the patch below?

It looks good. We should go with it.

Thanks,

Tanmay

>      ARM: pxa168/gplugd: add the correct SSP device
>
>      There is no SSP0, but SSP1 is used on gplugd as an I2S port.
>
>      Cc: Tanmay Upadhyay<tanmay.upadhyay@einfochips.com>
>      Signed-off-by: Eric Miao<eric.y.miao@gmail.com>
>
> diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
> index 6915656..4665767 100644
> --- a/arch/arm/mach-mmp/gplugd.c
> +++ b/arch/arm/mach-mmp/gplugd.c
> @@ -182,7 +182,7 @@ static void __init gplugd_init(void)
>
>          /* on-chip devices */
>          pxa168_add_uart(3);
> -       pxa168_add_ssp(0);
> +       pxa168_add_ssp(1);
>          pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
>
>          pxa168_add_eth(&gplugd_eth_platform_data);
>