From: prylowski@metasoft.pl (Rafal Prylowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/5] dmaengine: add ep93xx DMA support
Date: Mon, 21 Nov 2011 08:44:07 +0100 [thread overview]
Message-ID: <4ECA0147.4020806@metasoft.pl> (raw)
In-Reply-To: <20111119123837.GA2711@mwesterb-mobl.ger.corp.intel.com>
Hello.
> I wasn't able to reproduce this but can you try if following patch helps? I'm
> not sure if it is correct but at least we get more information about the
> problem.
>
> diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
> index 6181811..5b717da 100644
> --- a/drivers/dma/ep93xx_dma.c
> +++ b/drivers/dma/ep93xx_dma.c
> @@ -1106,6 +1106,7 @@ static int ep93xx_dma_terminate_all(struct ep93xx_dma_chan *edmac)
> spin_lock_irqsave(&edmac->lock, flags);
> /* First we disable and flush the DMA channel */
> edmac->edma->hw_shutdown(edmac);
> + tasklet_kill(&edmac->tasklet);
> clear_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags);
> list_splice_init(&edmac->active, &list);
> list_splice_init(&edmac->queue, &list);
>
It doesn't help:
Linux version 3.2.0-rc2EP-1+ (prylowski at server) (gcc version 4.4.2 (GCC) ) #1015
Mon Nov 21 08:30:57 CET 2011
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: Metasoft FonTel EP Board
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: mtdparts=physmap-flash.0:128K(uboot),1152K(kernel),15104K(r
ootfs) root=/dev/mtdblock2 rootfstype=jffs2 console=ttyAM0 init=/sbin/init early
printk lpj=496128 panic=2
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 27452k/27452k available, 5316k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc2800000 - 0xfe800000 ( 960 MB)
lowmem : 0xc0000000 - 0xc2000000 ( 32 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc029d000 (2644 kB)
.init : 0xc029d000 - 0xc02b6000 ( 100 kB)
.data : 0xc02b6000 - 0xc02d1440 ( 110 kB)
.bss : 0xc02d1464 - 0xc02df51c ( 57 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:120
VIC @fefb0000: id 0x00041190, vendor 0x41
VIC @fefc0000: id 0x00041190, vendor 0x41
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 99.22 BogoMIPS (lpj=496128)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
ep93xx clock: PLL1 running at 400 MHz, PLL2 at 192 MHz
ep93xx clock: FCLK 200 MHz, HCLK 100 MHz, PCLK 50 MHz
bio: create slab <bio-0> at 0
ep93xx-dma ep93xx-dma-m2p: EP93xx M2P DMA ready
ep93xx-dma ep93xx-dma-m2m: EP93xx M2M DMA ready
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.0: using pins 49 (SDA) and 48 (SCL)
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
JFFS2 version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc.
msgmni has been set to 53
io scheduler noop registered
io scheduler deadline registered (default)
Serial: AMBA driver
apb:uart1: ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA
console [ttyAM0] enabled
apb:uart2: ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA
apb:uart3: ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
fontel-pri fontel-pri: FonTel PRI initialized correctly.
ep93xx-ide ep93xx-ide: version 0.5
scsi0 : ep93xx-ide
ata1: PATA max UDMA/66 irq 40
physmap platform flash device: 01000000 at 60000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x00
0001 Chip ID 0x002101
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.3.
number of CFI chips: 1
3 cmdlinepart partitions found on MTD device physmap-flash.0
Creating 3 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000020000 : "uboot"
0x000000020000-0x000000140000 : "kernel"
0x000000140000-0x000001000000 : "rootfs"
ep93xx-spi ep93xx-spi.0: EP93xx SPI Controller at 0x808a0000 irq 53
ep93xx-eth version 0.1 loading
eth0: ep93xx on-chip ethernet, IRQ 39, aa:42:14:07:63:9d
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ep93xx-ohci ep93xx-ohci: EP93xx OHCI
ep93xx-ohci ep93xx-ohci: new USB bus registered, assigned bus number 1
ep93xx-ohci ep93xx-ohci: irq 56, io mem 0x80020000
ata1.00: HPA detected: current 234439535, native 234441648
ata1.00: ATA-7: ST9120822AS, 3.ALC, max UDMA/133
ata1.00: 234439535 sectors, multi 0: LBA48
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata1.00: configured for UDMA/66
scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.AL PQ: 0 ANSI: 5
usbcore: registered new interface driver fontel
sd 0:0:0:0: [sda] 234439535 512-byte logical blocks: (120 GB/111 GiB)
rtc-ds1307 0-0068: rtc core: registered ds1307 as rtc0
rtc-ds1307 0-0068: 56 bytes nvram
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ep93xx-rtc ep93xx-rtc: rtc core: registered ep93xx-rtc as rtc1
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec soft
_panic=0 (nowayout= 0)
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
ep93xx-rtc ep93xx-rtc: setting system clock to 1970-01-01 00:00:07 UTC (7)
Attempt to kill tasklet from interrupt
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 80000005 [#1]
CPU: 0 Not tainted (3.2.0-rc2EP-1+ #1015)
PC is at 0x0
LR is at sys_sched_yield+0x38/0x48
pc : [<00000000>] lr : [<c0015030>] psr: 20000093
sp : c02b7ce8 ip : c02b7cf8 fp : c02b7cf4
r10: c1918000 r9 : c19180a4 r8 : 00002118
r7 : 00000004 r6 : c02b7d20 r5 : c184d6bc r4 : c184d6b8
r3 : c023e458 r2 : c02b7ce8 r1 : 00000001 r0 : c02bcff0
Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: c000717f Table: c0004000 DAC: 00000017
Process swapper (pid: 0, stack limit = 0xc02b6270)
Stack: (0xc02b7ce8 to 0xc02b8000)
7ce0: c02b7d04 c02b7cf8 c023bdcc c0015008 c02b7d1c c02b7d08
7d00: c001ca04 c023bdb4 60000093 c184d680 c02b7d44 c02b7d20 c012ac8c c001c9d8
7d20: c02b7d20 c02b7d20 c02b7d44 c1914070 c19180a4 c2860000 c02b7d64 c02b7d48
7d40: c0177c50 c012ac54 c19180a4 c1918000 00000004 00000004 c02b7d8c c02b7d68
7d60: c0176a64 c0177c20 00000000 c1914190 00000000 00000001 0000000b c19180a4
7d80: c02b7dd4 c02b7d90 c0176cc0 c01769c4 00000001 40000093 00000000 00000000
7da0: c1914190 00000000 c1822000 c1912a80 00000028 00000000 00000000 00000028
7dc0: c02d8148 c02c0084 c02b7e0c c02b7dd8 c00426d0 c0176ae0 c02b7dfc c02b7de8
7de0: c0035628 c02c0084 00000028 c02b7f48 c02b7eb4 c02bd44c c02d60e0 c02b0c90
7e00: c02b7e24 c02b7e10 c004285c c004268c c02c0084 00000028 c02b7e3c c02b7e28
7e20: c0045178 c004283c c02c4578 00000028 c02b7e4c c02b7e40 c0042254 c00450fc
7e40: c02b7e6c c02b7e50 c0009838 c0042228 c001cb80 20000013 fefc0001 c02b7eb4
7e60: c02b7e7c c02b7e70 c0008190 c0009810 c02b7f04 c02b7e80 c0008b64 c0008190
7e80: 00000000 00000000 00000000 20000013 00000040 00000040 c02d60e0 c02b6000
7ea0: c02bd44c c02d60e0 c02b0c90 c02b7f04 c02b7f08 c02b7ec8 c001cdd0 c001cb80
7ec0: 20000013 ffffffff c02b7eec c02b7ed8 c004496c 0000000a c02bf674 c02c4578
7ee0: 00000011 00000000 c02b7f7c c0004000 41129200 c02b0c90 c02b7f14 c02b7f08
7f00: c001cdd0 c001cb38 c02b7f34 c02b7f18 c000983c c001cd98 c0009a60 60000013
7f20: fefb0001 c02b7f7c c02b7f44 c02b7f38 c0008190 c0009810 c02b7f9c c02b7f48
7f40: c0008b64 c0008190 c02c2bf8 00000002 c02b7f90 60000013 c02b6000 c02d1504
7f60: c02baa88 c02baa80 c0004000 41129200 c02b0c90 c02b7f9c c02b7fa0 c02b7f90
7f80: c0009a54 c0009a60 60000013 ffffffff c02b7fbc c02b7fa0 c000a03c c0009a40
7fa0: c02b80b0 c02b19ec c02b19e8 c02baa80 c02b7fcc c02b7fc0 c02384b4 c0009fd4
7fc0: c02b7ff4 c02b7fd0 c029d924 c0238464 c029d49c 00000000 00000000 c02b19ec
7fe0: c0007175 c02b803c 00000000 c02b7ff8 c000803c c029d700 00000000 00000000
Backtrace:
[<c0014ff8>] (sys_sched_yield+0x0/0x48) from [<c023bdcc>] (yield+0x28/0x2c)
[<c023bda4>] (yield+0x0/0x2c) from [<c001ca04>] (tasklet_kill+0x3c/0x9c)
[<c001c9c8>] (tasklet_kill+0x0/0x9c) from [<c012ac8c>] (ep93xx_dma_control+0x48/
0x1c0)
r5:c184d680 r4:60000093
[<c012ac44>] (ep93xx_dma_control+0x0/0x1c0) from [<c0177c50>] (ep93xx_pata_dma_s
top+0x40/0xb8)
r6:c2860000 r5:c19180a4 r4:c1914070
[<c0177c10>] (ep93xx_pata_dma_stop+0x0/0xb8) from [<c0176a64>] (ata_bmdma_port_i
ntr+0xb0/0x11c)
r7:00000004 r6:00000004 r5:c1918000 r4:c19180a4
[<c01769b4>] (ata_bmdma_port_intr+0x0/0x11c) from [<c0176cc0>] (ata_bmdma_interr
upt+0x1f0/0x274)
r9:c19180a4 r8:0000000b r7:00000001 r6:00000000 r5:c1914190
r4:00000000
[<c0176ad0>] (ata_bmdma_interrupt+0x0/0x274) from [<c00426d0>] (handle_irq_event
_percpu+0x54/0x1b0)
[<c004267c>] (handle_irq_event_percpu+0x0/0x1b0) from [<c004285c>] (handle_irq_e
vent+0x30/0x40)
[<c004282c>] (handle_irq_event+0x0/0x40) from [<c0045178>] (handle_level_irq+0x8
c/0xe8)
r5:00000028 r4:c02c0084
[<c00450ec>] (handle_level_irq+0x0/0xe8) from [<c0042254>] (generic_handle_irq+0
x3c/0x48)
r5:00000028 r4:c02c4578
[<c0042218>] (generic_handle_irq+0x0/0x48) from [<c0009838>] (handle_IRQ+0x38/0x
8c)
[<c0009800>] (handle_IRQ+0x0/0x8c) from [<c0008190>] (asm_do_IRQ+0x10/0x14)
r7:c02b7eb4 r6:fefc0001 r5:20000013 r4:c001cb80
[<c0008180>] (asm_do_IRQ+0x0/0x14) from [<c0008b64>] (__irq_svc+0x24/0xc0)
Exception stack(0xc02b7e80 to 0xc02b7ec8)
7e80: 00000000 00000000 00000000 20000013 00000040 00000040 c02d60e0 c02b6000
7ea0: c02bd44c c02d60e0 c02b0c90 c02b7f04 c02b7f08 c02b7ec8 c001cdd0 c001cb80
7ec0: 20000013 ffffffff
[<c001cb28>] (__do_softirq+0x0/0x154) from [<c001cdd0>] (irq_exit+0x48/0x50)
[<c001cd88>] (irq_exit+0x0/0x50) from [<c000983c>] (handle_IRQ+0x3c/0x8c)
[<c0009800>] (handle_IRQ+0x0/0x8c) from [<c0008190>] (asm_do_IRQ+0x10/0x14)
r7:c02b7f7c r6:fefb0001 r5:60000013 r4:c0009a60
[<c0008180>] (asm_do_IRQ+0x0/0x14) from [<c0008b64>] (__irq_svc+0x24/0xc0)
Exception stack(0xc02b7f48 to 0xc02b7f90)
7f40: c02c2bf8 00000002 c02b7f90 60000013 c02b6000 c02d1504
7f60: c02baa88 c02baa80 c0004000 41129200 c02b0c90 c02b7f9c c02b7fa0 c02b7f90
7f80: c0009a54 c0009a60 60000013 ffffffff
[<c0009a30>] (default_idle+0x0/0x34) from [<c000a03c>] (cpu_idle+0x78/0xb0)
[<c0009fc4>] (cpu_idle+0x0/0xb0) from [<c02384b4>] (rest_init+0x60/0x78)
r7:c02baa80 r6:c02b19e8 r5:c02b19ec r4:c02b80b0
[<c0238454>] (rest_init+0x0/0x78) from [<c029d924>] (start_kernel+0x234/0x278)
[<c029d6f0>] (start_kernel+0x0/0x278) from [<c000803c>] (0xc000803c)
r5:c02b803c r4:c0007175
Code: bad PC value
---[ end trace 3d4b7b18cc0879b4 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 2 seconds..
I'm calling dma_terminate_all from interrupt. It seems that tasklet_kill is not
allowed to be called from this context.
Thanks,
Rafa? Pry?owski.
next prev parent reply other threads:[~2011-11-21 7:44 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-29 10:10 [PATCH v2 0/5] ep93xx DMA patches Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 1/5] dmaengine: add ep93xx DMA support Mika Westerberg
2011-11-15 15:02 ` Rafal Prylowski
2011-11-15 17:59 ` H Hartley Sweeten
2011-11-16 6:48 ` Mika Westerberg
2011-11-16 9:00 ` Rafal Prylowski
2011-11-16 6:55 ` Mika Westerberg
2011-11-16 8:31 ` Rafal Prylowski
2011-11-19 12:38 ` Mika Westerberg
2011-11-21 7:44 ` Rafal Prylowski [this message]
2011-11-21 8:01 ` Mika Westerberg
2011-11-21 8:32 ` Vinod Koul
2011-11-22 5:59 ` Mika Westerberg
2011-11-23 10:47 ` Vinod Koul
2011-11-21 8:54 ` Rafal Prylowski
2011-11-22 6:47 ` Mika Westerberg
2011-11-22 8:45 ` Rafal Prylowski
2011-05-29 10:10 ` [PATCH v2 2/5] ep93xx: add dmaengine platform code Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 3/5] ASoC: ep93xx: convert to use the DMA engine API Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 4/5] ep93xx: remove the old M2P DMA code Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 5/5] spi/ep93xx: add DMA support Mika Westerberg
2011-06-03 20:44 ` Grant Likely
2011-06-07 17:14 ` Mika Westerberg
2011-06-07 18:45 ` Grant Likely
2011-06-07 19:06 ` Mika Westerberg
2011-06-07 19:18 ` Grant Likely
2011-06-07 19:29 ` Mika Westerberg
2011-06-07 19:40 ` Grant Likely
2011-06-08 3:58 ` Koul, Vinod
2011-06-08 21:53 ` Grant Likely
2011-06-09 16:42 ` Koul, Vinod
2011-06-09 18:46 ` Grant Likely
2011-06-09 19:15 ` Mika Westerberg
2011-06-05 8:19 ` [PATCH v2 0/5] ep93xx DMA patches Mika Westerberg
2011-06-06 6:39 ` Koul, Vinod
2011-06-06 16:42 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ECA0147.4020806@metasoft.pl \
--to=prylowski@metasoft.pl \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).