[PATCH 6/6] ARM: support kernel modules in BE8 mode

[junxiao.bi@windriver.com (Bi Junxiao)]

on 11/22/2011 03:29 AM Nicolas Pitre wrote:
> On Tue, 15 Nov 2011, Junxiao Bi wrote:
>
>    
>> From: Stanley.Miao<stanley.miao@windriver.com>
>>
>> In BE8 mode, data must be manipulated in big endian format while
>> text must be little endian. Therefore, when relocating the text
>> section of module in BE8 mode, we must convert the location offset
>> of the text to big endian from the native little endian. After
>> the relocation is complete, the location offset value is re-written
>> as little endian.
>>
>> Since only BE8 mode has such special requirement while other big endian
>> mode not, cpu_to_le32 and le32_to_cpu can not be used to relocate the
>> text. We introduce write_instr* and read_instr* to do it.
>>
>> Signed-off-by: Stanley.Miao<stanley.miao@windriver.com>
>> Signed-off-by: Junxiao Bi<junxiao.bi@windriver.com>
>> ---
>>   arch/arm/Makefile         |    1 +
>>   arch/arm/include/asm/io.h |   12 ++++++++++
>>   arch/arm/kernel/module.c  |   51 +++++++++++++++++++++++----------------------
>>   3 files changed, 39 insertions(+), 25 deletions(-)
>>
>> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
>> index dfcf3b0..c858184 100644
>> --- a/arch/arm/Makefile
>> +++ b/arch/arm/Makefile
>> @@ -13,6 +13,7 @@
>>   LDFLAGS_vmlinux	:=-p --no-undefined -X
>>   ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
>>   LDFLAGS_vmlinux	+= --be8
>> +LDFLAGS_MODULE	+= --be8
>>   endif
>>
>>   OBJCOPYFLAGS	:=-O binary -R .comment -S
>> diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
>> index 065d100..4b6c7de 100644
>> --- a/arch/arm/include/asm/io.h
>> +++ b/arch/arm/include/asm/io.h
>> @@ -210,6 +210,18 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
>>    * Again, this are defined to perform little endian accesses.  See the
>>    * IO port primitives for more information.
>>    */
>> +#ifdef CONFIG_CPU_ENDIAN_BE8
>> +#define read_instr32(c)		__swab32(*(u32 *)(c))
>> +#define read_instr16(c)		__swab16(*(u16 *)(c))
>> +#define write_instr32(v, a)	(*(u32 *)(a) = __swab32((__force __u32)(v)))
>> +#define write_instr16(v, a)	(*(u16 *)(a) = __swab16((__force __u16)(v)))
>> +#else
>> +#define read_instr32(c)		(*(u32 *)(c))
>> +#define read_instr16(c)		(*(u16 *)(c))
>> +#define write_instr32(v, a)	(*(u32 *)(a) = (v))
>> +#define write_instr16(v, a)	(*(u16 *)(a) = (v))
>> +#endif
>>      
> NAK.  This has nothing to do with IO.
>
> If only module.c requires this, please move those definitions there.
>    
Not only modules, all components that needs to read and write text 
segment like kprobes also needs this. As it is special to arm be8, how 
about define it in arch/arm/include/asm/swab.h?
>
> Nicolas
>
>