From mboxrd@z Thu Jan 1 00:00:00 1970 From: nicolas.ferre@atmel.com (Nicolas Ferre) Date: Tue, 22 Nov 2011 15:44:33 +0100 Subject: [PATCH v8] AT91: Add a driver for the ADC In-Reply-To: <4ECBB226.4080404@free-electrons.com> References: <1321611160-3685-1-git-send-email-maxime.ripard@free-electrons.com> <4ECBB226.4080404@free-electrons.com> Message-ID: <4ECBB551.4@atmel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 11/22/2011 03:31 PM, Maxime Ripard : > Hi, > > So, I guess that we have a pretty good driver with that version. What > can we do for the inclusion in the kernel now ? I propose that: 1/ We take the patch #1/3 for inclusion through arm-soc during 3.2 2/ Jonathan takes the #2/3 in his IIO subsystem 3/ We take board related patch #3/3 for inclusion during 3.3 (next) 4/ And we may add other boards support if we are quick for 3.3... Does is sound good to all of you? Bye, > > Maxime > > On 18/11/2011 11:12, Maxime Ripard wrote: >> Hi all, >> >> This patchset adds the driver for the ADC in the AT91 SoC. It has been tested on >> the at91sam9g20ek and should work on sam9g45 as well. >> >> For now, it only reads values when asked for by sysfs, but eventually will >> support hardware triggers and more boards. >> >> This patchset is based on the "[PATCH 0/6 V2] IIO: Out of staging step 1: The >> core" patchset from Jonathan Cameron, applied on top of 3.1 >> >> Improvements from v7: >> - Fix the channels mask bug >> >> Cc: Nicolas Ferre >> Cc: Patrice Vilchez >> Cc: Thomas Petazzoni >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel at lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > > -- Nicolas Ferre