From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@solonet.org.ua (Denis Kuzmenko) Date: Wed, 23 Nov 2011 20:11:27 +0200 Subject: [PATCH resend] arm: s3c24xx: Add new LCD (W35i) support for Mini2440 board In-Reply-To: <4EC588A8.3030907@solonet.org.ua> References: <4EC588A8.3030907@solonet.org.ua> Message-ID: <4ECD374F.5060208@solonet.org.ua> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add new LCD (W35i) support for Mini2440 board Signed-off-by: Denis Kuzmenko --- I need to refer this patch but can't find it on lkml.org Maybe I haven't send it... Sorry for bothering if I did so. diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index fc2dc0b..951eadd 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -167,6 +167,24 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { .lcdcon5 = (S3C2410_LCDCON5_FRM565 | S3C2410_LCDCON5_HWSWP), }, + /* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/ + [3] = { + _LCD_DECLARE( + /* clock */ + 7, + /* xres, margin_right, margin_left, hsync */ + 320, 68, 66, 4, + /* yres, margin_top, margin_bottom, vsync */ + 240, 4, 4, 9, + /* refresh rate */ + 60), + .lcdcon5 = (S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_INVVDEN | + S3C2410_LCDCON5_INVVFRAME | + S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_INVVCLK | + S3C2410_LCDCON5_HWSWP), + }, }; /* todo - put into gpio header */