From mboxrd@z Thu Jan 1 00:00:00 1970 From: sshtylyov@mvista.com (Sergei Shtylyov) Date: Sun, 04 Dec 2011 16:33:59 +0400 Subject: [PATCH] arm, davinci: configure davinci aemif chipselects through OF In-Reply-To: <1322991679-20947-1-git-send-email-hs@denx.de> References: <1322991679-20947-1-git-send-email-hs@denx.de> Message-ID: <4EDB68B7.8080609@mvista.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello. On 04-12-2011 13:41, Heiko Schocher wrote: > Signed-off-by: Heiko Schocher > Cc: davinci-linux-open-source at linux.davincidsp.com > Cc: devicetree-discuss at lists.ozlabs.org > Cc: linux-arm-kernel at lists.infradead.org > Cc: grant.likely at secretlab.ca > Cc: Sekhar Nori > Cc: Kevin Hilman > Cc: Wolfgang Denk [...] > diff --git a/Documentation/devicetree/bindings/arm/davinci/aemif.txt b/Documentation/devicetree/bindings/arm/davinci/aemif.txt > new file mode 100644 > index 0000000..c9ed551 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/davinci/aemif.txt > @@ -0,0 +1,85 @@ > +* Texas Instruments Davinci AEMIF > + > +This file provides information, what the device node for the > +davinci aemifa interface contain. [...] > +Example (enbw_cmc board): > + aemif at 60000000 { > + compatible = "ti,davinci-emifa"; > + #address-cells = <2>; > + #size-cells = <1>; > + reg = <0x68000000 0x80000>; > + ranges = <2 0 0x60000000 0x02000000 > + 3 0 0x62000000 0x02000000 > + 4 0 0x64000000 0x02000000 > + 5 0 0x66000000 0x02000000>; > + cs2 at 0x60000000 { 0x shouldn't be included. > + compatible = "ti,davinci-cs"; > + #address-cells = <1>; > + #size-cells = <1>; > + /* all timings in nanoseconds */ > + cs = <2>; > + asize = <1>; > + ta = <0>; > + rhold = <7>; > + rstrobe = <42>; > + rsetup = <14>; > + whold = <7>; > + wstrobe = <42>; > + wsetup = <14>; > + ew = <0>; > + ss = <0>; > + }; > + flash at 2,0 { Why you have one kind of address for cs2 at 60000000 node and other kind for this node? WBR, Sergei