From mboxrd@z Thu Jan  1 00:00:00 1970
From: grinberg@compulab.co.il (Igor Grinberg)
Date: Wed, 14 Dec 2011 16:26:23 +0200
Subject: [PATCH v3] ARM: OMAP3LOGIC: Adding DSS support
In-Reply-To: <1323865510-6273-1-git-send-email-alexg@meprolight.com>
References: <1323865510-6273-1-git-send-email-alexg@meprolight.com>
Message-ID: <4EE8B20F.5070907@compulab.co.il>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Alex,

On 12/14/11 14:25, Alex wrote:
> This patch adds DSS2 support to the LogicPD OMAP 35x Torpedo boardfile. LCD and
> TV-out are supported.
> 
> Signed-off-by: Alex Gershgorin <alexg@meprolight.com>
> ---
>  arch/arm/mach-omap2/board-omap3logic.c |   96 ++++++++++++++++++++++++++++++++
>  1 files changed, 96 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
> index 7c0f193..b44c485 100644
> --- a/arch/arm/mach-omap2/board-omap3logic.c
> +++ b/arch/arm/mach-omap2/board-omap3logic.c
> @@ -7,6 +7,9 @@
>   * Copyright (C) 2010 Logic Product Development, Inc.
>   * Peter Barada <peter.barada@logicpd.com>
>   *
> + * Copyright (C) 2011 Meprolight, Ltd.
> + * Alex Gershgorin <alexg@meprolight.com>
> + *
>   * Modified from Beagle, EVM, and RX51
>   *
>   * This program is free software; you can redistribute it and/or modify
> @@ -45,6 +48,9 @@
>  #include <plat/gpmc.h>
>  #include <plat/sdrc.h>
>  
> +#include <video/omapdss.h>
> +#include <video/omap-panel-generic-dpi.h>
> +
>  #define OMAP3LOGIC_SMSC911X_CS			1
>  
>  #define OMAP3530_LV_SOM_MMC_GPIO_CD		110
> @@ -95,6 +101,13 @@ static struct twl4030_platform_data omap3logic_twldata = {
>  
>  static int __init omap3logic_i2c_init(void)
>  {
> +	omap3_pmic_get_config(&omap3logic_twldata, TWL_COMMON_PDATA_USB,
> +			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
> +
> +	omap3logic_twldata.vdac->constraints.apply_uV = true;
> +	omap3logic_twldata.vpll2->constraints.apply_uV = true;
> +	omap3logic_twldata.vpll2->constraints.name = "VDSI";
> +
>  	omap3_pmic_init("twl4030", &omap3logic_twldata);
>  	return 0;
>  }
> @@ -182,6 +195,88 @@ static inline void __init board_smsc911x_init(void)
>  	gpmc_smsc911x_init(&board_smsc911x_data);
>  }
>  
> +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
> +
> +#define OMAP3_TORPEDO_LCD_BACKLIGHT_GPIO	154
> +#define OMAP3_TORPEDO_LCD_ENABLE_GPIO		155
> +#define OMAP3_TORPEDO_LCD_PWM_GPIO		56
> +
> +static struct gpio omap3logic_dss_gpios[] __initdata = {
> +	{OMAP3_TORPEDO_LCD_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "lcd_bl_pwr"},
> +	{OMAP3_TORPEDO_LCD_PWM_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable"},
> +	{OMAP3_TORPEDO_LCD_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable"},
> +};
> +
> +static int omap3logic_enable_lcd(struct omap_dss_device *dssdev)
> +{
> +	gpio_set_value_cansleep(OMAP3_TORPEDO_LCD_ENABLE_GPIO, 1);
> +	gpio_set_value_cansleep(OMAP3_TORPEDO_LCD_BACKLIGHT_GPIO, 1);
> +	gpio_set_value(OMAP3_TORPEDO_LCD_PWM_GPIO, 1);
> +
> +	return 0;
> +}
> +
> +static void omap3logic_disable_lcd(struct omap_dss_device *dssdev)
> +{
> +	gpio_set_value_cansleep(OMAP3_TORPEDO_LCD_ENABLE_GPIO, 0);
> +	gpio_set_value_cansleep(OMAP3_TORPEDO_LCD_BACKLIGHT_GPIO, 0);
> +	gpio_set_value(OMAP3_TORPEDO_LCD_PWM_GPIO, 0);
> +}
> +
> +static struct panel_generic_dpi_data lcd_panel = {
> +	.name			= "sharp_lq",
> +	.platform_enable	= omap3logic_enable_lcd,
> +	.platform_disable	= omap3logic_disable_lcd,
> +};
> +
> +static struct omap_dss_device omap3logic_lcd_device = {
> +	.name			= "lcd",
> +	.driver_name		= "generic_dpi_panel",
> +	.type			= OMAP_DISPLAY_TYPE_DPI,
> +	.data			= &lcd_panel,
> +	.phy.dpi.data_lines	= 16,
> +};
> +
> +static struct omap_dss_device omap3logic_tv_device = {
> +	.name			= "tv",
> +	.driver_name		= "venc",
> +	.type			= OMAP_DISPLAY_TYPE_VENC,
> +	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
> +};
> +
> +static struct omap_dss_device *omap3logic_dss_devices[] = {
> +	&omap3logic_lcd_device,
> +	&omap3logic_tv_device,
> +};
> +
> +static struct omap_dss_board_info omap3logic_dss_data = {
> +	.num_devices		= ARRAY_SIZE(omap3logic_dss_devices),
> +	.devices		= omap3logic_dss_devices,
> +	.default_device		= &omap3logic_lcd_device,
> +};
> +
> +static void __init omap3logic_display_init(void)
> +{
> +	int r;
> +
> +	r = gpio_request_array(omap3logic_dss_gpios,
> +			       ARRAY_SIZE(omap3logic_dss_gpios));
> +	if (r) {
> +		printk(KERN_ERR "failed to get lcd_panel_* gpios\n");

You use pr_err() below, why not here?

> +		return;
> +	}
> +
> +	r = omap_display_init(&omap3logic_dss_data);
> +	if (r) {
> +		pr_err("OMAP3LOGIC: failed to register DSS device\n");
> +		gpio_free_array(omap3logic_dss_gpios,
> +				ARRAY_SIZE(omap3logic_dss_gpios));
> +	}
> +}
> +#else
> +static void __init omap3logic_display_init(void) { }
> +#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
> +
>  #ifdef CONFIG_OMAP_MUX
>  static struct omap_board_mux board_mux[] __initdata = {
>  	{ .reg_offset = OMAP_MUX_TERMINATOR },
> @@ -197,6 +292,7 @@ static void __init omap3logic_init(void)
>  	omap_sdrc_init(NULL, NULL);
>  	board_mmc_init();
>  	board_smsc911x_init();
> +	omap3logic_display_init();
>  
>  	/* Ensure SDRC pins are mux'd for self-refresh */
>  	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);

-- 
Regards,
Igor.