* [GIT PULL] Samsung devel-1 for v3.3
@ 2011-12-16 7:44 Kukjin Kim
2011-12-16 15:22 ` Arnd Bergmann
0 siblings, 1 reply; 3+ messages in thread
From: Kukjin Kim @ 2011-12-16 7:44 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd and Olof,
Please pull next-samsung-devel for v3.3.
It includes DT support for EXYNOS, update Cragganmore board and SPI clkdev
support. As a note, out of arch/arm/samsung stuff got the ack from regarding
maintainers and actually, it has been included in linux-next for long time
so I think, it has no problem for v3.3.
One more, I need to follow up Russell and some arm consolidation work and
one plat-samsung directory and apply some patches in my mail-box ;) It will
be sent to you soon.
If any problems, please let me know.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
The following changes since commit dc47ce90c3a822cd7c9e9339fe4d5f61dcb26b50:
Linux 3.2-rc5 (2011-12-09 15:09:32 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next-samsung-devel
Boojin Kim (1):
ARM: EXYNOS: Enable MDMA driver
Denis Kuzmenko (1):
ARM: S3C2440: Add new LCD (W35i) support for Mini2440 board
Kukjin Kim (2):
Merge branch 'next/topic-devel-s3c' into next-samsung-devel
Merge branch 'next/topic-devel-exynos' into next-samsung-devel
Mark Brown (14):
serial: samsung: Fix build for non-Exynos4210 devices
ARM: S3C64XX: Update for conversion to SAMSUNG_GPIO_EXTRA
ARM: SAMSUNG: Fix GPIO space reservation for S3C64xx platforms
ARM: S3C64XX: Correct reservation of GPIOs for CPU module on
Cragganmore
ARM: S3C64XX: Raise the frequency of the second I2C bus on Cragganmore
ARM: S3C64XX: Use software initiated powerdown for Cragganmore
ARM: S3C64XX: Configure WM1250 EV1 GPIOs on Cragganmore
ARM: S3C64XX: Improve logging of unknown Cragganmore module types
ARM: S3C64XX: Run Tobermory interrupts in the default mode
ARM: S3C64XX: Hook up platform data for Kilchomin module on
Cragganmore
ARM: S3C64XX: Hook up Littlemill audio card on Cragganmore
ARM: S3C64XX: Power gate unused domains
ARM: S3C64XX: Hook up VDDINT on Cragganmore
ARM: S3C64XX: Gate some more clocks by default
Padmavathi Venna (6):
spi/s3c64xx: Use bus clocks created using clkdev
ARM: S3C64XX: Add SPI clkdev support
ARM: S5PC100: Add SPI clkdev support
ARM: S5P64X0: Add SPI clkdev support
ARM: S5PV210: Add SPI clkdev support
ARM: SAMSUNG: Remove SPI bus clocks from platform data
Rajeshwari Shinde (3):
ARM: SAMSUNG: Remove SDHCI bus clocks from platform data
ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
mmc: sdhci-s3c: Use generic clock names for sdhci bus clock options
Sangwook Lee (1):
ARM: EXYNOS: Enable Bluetooth on ORIGEN
Thomas Abraham (27):
ARM: SAMSUNG: Move timer irq numbers to end of linux irq space
ARM: EXYNOS: Add ioremap interceptor for statically remapped regions
ARM: EXYNOS: Enable conversion of GIC dt irq specifier to linux virq
gpio/samsung: Add device tree support for EXYNOS4
serial: samsung: Keep a copy of the location of platform data in
driver's private data
ARM: S3C2440: move handling of fclk/n clock to platform code
serial: samsung: switch to clkdev based clock lookup
ARM: SAMSUNG: remove struct 's3c24xx_uart_clksrc' and all uses of it
serial: samsung: remove all uses of get_clksrc and set_clksrc
ARM: SAMSUNG: register uart clocks to clock lookup list
serial: samsung: merge all SoC specific port reset functions
serial: samsung: merge probe() function from all SoC specific
extensions
serial: samsung: add device tree support
DMA: PL330: move filter function into driver
DMA: PL330: Infer transfer direction from transfer request instead of
platform data
ARM: EXYNOS: Modify platform data for pl330 driver
DMA: PL330: Add device tree support
ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers
ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build
ARM: EXYNOS: Add a alias for pdma clocks
ARM: S5P64x0: Modify platform data for pl330 driver
ARM: S5PC100: Modify platform data for pl330 driver
ARM: S5PV210: Modify platform data for pl330 driver
input: samsung-keypad: Add device tree support
rtc: rtc-s3c: Add device tree support
ARM: EXYNOS: Add Exynos4 device tree enabled board file
ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN
.../devicetree/bindings/arm/insignal-boards.txt | 8 +
.../devicetree/bindings/arm/samsung-boards.txt | 8 +
.../devicetree/bindings/dma/arm-pl330.txt | 30 +
.../devicetree/bindings/gpio/gpio-samsung.txt | 40 ++
.../devicetree/bindings/input/samsung-keypad.txt | 88 +++
Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 20 +
.../devicetree/bindings/serial/samsung_uart.txt | 14 +
arch/arm/boot/dts/exynos4210-origen.dts | 137 +++++
arch/arm/boot/dts/exynos4210-smdkv310.dts | 182 ++++++
arch/arm/boot/dts/exynos4210.dtsi | 397 ++++++++++++
arch/arm/mach-exynos/Kconfig | 24 +
arch/arm/mach-exynos/Makefile | 6 +-
arch/arm/mach-exynos/clock.c | 237 +++++---
arch/arm/mach-exynos/cpu.c | 39 ++-
arch/arm/mach-exynos/dma.c | 264 ++++-----
arch/arm/mach-exynos/include/mach/entry-macro.S | 1 -
arch/arm/mach-exynos/include/mach/io.h | 5 +
arch/arm/mach-exynos/include/mach/irqs.h | 10 +-
arch/arm/mach-exynos/include/mach/map.h | 3 +-
arch/arm/mach-exynos/init.c | 21 +-
arch/arm/mach-exynos/mach-exynos4-dt.c | 85 +++
arch/arm/mach-exynos/mach-origen.c | 34 +
arch/arm/mach-exynos/setup-sdhci.c | 22 -
arch/arm/mach-s3c2410/mach-bast.c | 22 -
arch/arm/mach-s3c2410/mach-vr1000.c | 24 -
arch/arm/mach-s3c2410/s3c2410.c | 6 +
arch/arm/mach-s3c2412/clock.c | 7 +
arch/arm/mach-s3c2416/Makefile | 1 -
arch/arm/mach-s3c2416/clock.c | 68 ++-
arch/arm/mach-s3c2416/setup-sdhci.c | 24 -
arch/arm/mach-s3c2440/clock.c | 44 ++
arch/arm/mach-s3c2440/mach-anubis.c | 22 +-
arch/arm/mach-s3c2440/mach-at2440evb.c | 22 +-
arch/arm/mach-s3c2440/mach-mini2440.c | 18 +
arch/arm/mach-s3c2440/mach-osiris.c | 24 +-
arch/arm/mach-s3c2440/mach-rx1950.c | 18 +-
arch/arm/mach-s3c2440/mach-rx3715.c | 19 +-
arch/arm/mach-s3c64xx/Kconfig | 6 +-
arch/arm/mach-s3c64xx/Makefile | 1 -
arch/arm/mach-s3c64xx/clock.c | 263 +++++---
arch/arm/mach-s3c64xx/dev-spi.c | 7 -
arch/arm/mach-s3c64xx/include/mach/crag6410.h | 6 +-
arch/arm/mach-s3c64xx/include/mach/gpio.h | 2 +-
arch/arm/mach-s3c64xx/include/mach/irqs.h | 2 +-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 56 ++-
arch/arm/mach-s3c64xx/mach-crag6410.c | 39 ++-
arch/arm/mach-s3c64xx/pm.c | 15 +
arch/arm/mach-s3c64xx/setup-sdhci.c | 24 -
arch/arm/mach-s5p64x0/clock-s5p6440.c | 93 ++--
arch/arm/mach-s5p64x0/clock-s5p6450.c | 81 ++-
arch/arm/mach-s5p64x0/dev-spi.c | 6 -
arch/arm/mach-s5p64x0/dma.c | 227 ++-----
arch/arm/mach-s5p64x0/include/mach/irqs.h | 2 +
arch/arm/mach-s5p64x0/init.c | 31 -
arch/arm/mach-s5pc100/Makefile | 1 -
arch/arm/mach-s5pc100/clock.c | 287 ++++++----
arch/arm/mach-s5pc100/dev-spi.c | 7 -
arch/arm/mach-s5pc100/dma.c | 247 +++------
arch/arm/mach-s5pc100/include/mach/irqs.h | 2 +
arch/arm/mach-s5pc100/setup-sdhci.c | 23 -
arch/arm/mach-s5pv210/Makefile | 1 -
arch/arm/mach-s5pv210/clock.c | 324 ++++++----
arch/arm/mach-s5pv210/dev-spi.c | 6 -
arch/arm/mach-s5pv210/dma.c | 241 +++------
arch/arm/mach-s5pv210/include/mach/irqs.h | 2 +
arch/arm/mach-s5pv210/init.c | 19 -
arch/arm/mach-s5pv210/setup-sdhci.c | 22 -
arch/arm/plat-s3c24xx/s3c2443-clock.c | 39 +-
arch/arm/plat-samsung/Kconfig | 8 +
arch/arm/plat-samsung/dma-ops.c | 15 +-
arch/arm/plat-samsung/include/plat/dma-ops.h | 1 +
arch/arm/plat-samsung/include/plat/dma-pl330.h | 11 +-
arch/arm/plat-samsung/include/plat/irqs.h | 3 +-
arch/arm/plat-samsung/include/plat/regs-serial.h | 45 +-
arch/arm/plat-samsung/include/plat/s3c64xx-spi.h | 2 -
arch/arm/plat-samsung/include/plat/sdhci.h | 31 -
drivers/dma/pl330.c | 99 ++--
drivers/gpio/gpio-samsung.c | 72 +++
drivers/input/keyboard/samsung-keypad.c | 174 +++++-
drivers/mmc/host/sdhci-s3c.c | 7 +-
drivers/rtc/rtc-s3c.c | 21 +-
drivers/spi/spi-s3c64xx.c | 14 +-
drivers/tty/serial/Kconfig | 45 +--
drivers/tty/serial/Makefile | 5 -
drivers/tty/serial/s3c2410.c | 115 ----
drivers/tty/serial/s3c2412.c | 149 -----
drivers/tty/serial/s3c2440.c | 178 ------
drivers/tty/serial/s3c6400.c | 149 -----
drivers/tty/serial/s5pv210.c | 158 -----
drivers/tty/serial/samsung.c | 639
++++++++++++--------
drivers/tty/serial/samsung.h | 32 +-
include/linux/amba/pl330.h | 15 +-
92 files changed, 3264 insertions(+), 2800 deletions(-)
create mode 100644
Documentation/devicetree/bindings/arm/insignal-boards.txt
create mode 100644 Documentation/devicetree/bindings/arm/samsung-boards.txt
create mode 100644 Documentation/devicetree/bindings/dma/arm-pl330.txt
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-samsung.txt
create mode 100644
Documentation/devicetree/bindings/input/samsung-keypad.txt
create mode 100644 Documentation/devicetree/bindings/rtc/s3c-rtc.txt
create mode 100644
Documentation/devicetree/bindings/serial/samsung_uart.txt
create mode 100644 arch/arm/boot/dts/exynos4210-origen.dts
create mode 100644 arch/arm/boot/dts/exynos4210-smdkv310.dts
create mode 100644 arch/arm/boot/dts/exynos4210.dtsi
create mode 100644 arch/arm/mach-exynos/mach-exynos4-dt.c
delete mode 100644 arch/arm/mach-exynos/setup-sdhci.c
delete mode 100644 arch/arm/mach-s3c2416/setup-sdhci.c
delete mode 100644 arch/arm/mach-s3c64xx/setup-sdhci.c
delete mode 100644 arch/arm/mach-s5pc100/setup-sdhci.c
delete mode 100644 arch/arm/mach-s5pv210/setup-sdhci.c
delete mode 100644 drivers/tty/serial/s3c2410.c
delete mode 100644 drivers/tty/serial/s3c2412.c
delete mode 100644 drivers/tty/serial/s3c2440.c
delete mode 100644 drivers/tty/serial/s3c6400.c
delete mode 100644 drivers/tty/serial/s5pv210.c
^ permalink raw reply [flat|nested] 3+ messages in thread* [GIT PULL] Samsung devel-1 for v3.3 2011-12-16 7:44 [GIT PULL] Samsung devel-1 for v3.3 Kukjin Kim @ 2011-12-16 15:22 ` Arnd Bergmann 2011-12-18 15:57 ` Kukjin Kim 0 siblings, 1 reply; 3+ messages in thread From: Arnd Bergmann @ 2011-12-16 15:22 UTC (permalink / raw) To: linux-arm-kernel On Friday 16 December 2011, Kukjin Kim wrote: > Please pull next-samsung-devel for v3.3. > It includes DT support for EXYNOS, update Cragganmore board and SPI clkdev > support. As a note, out of arch/arm/samsung stuff got the ack from regarding > maintainers and actually, it has been included in linux-next for long time > so I think, it has no problem for v3.3. > > One more, I need to follow up Russell and some arm consolidation work and > one plat-samsung directory and apply some patches in my mail-box ;) It will > be sent to you soon. > > If any problems, please let me know. The patches look really good for the most part, but I'd rather not take them like this because you have put so many different things into a single branch. Your branch is much larger than any of the others that are currently queued in arm-soc. Can you split it up into separate branches for dt, board and clkdev and driver changes or something along those lines? A number of changes in here also seem to qualify as cleanups, so they might better be held in a branch for that. I also found one commit that I think should not be there: 25767e69 "ARM: EXYNOS: Add ioremap interceptor for statically remapped regions" from Thomas Abraham. As far as I know, the work that Nico did on the vmalloc_end elimination will conflict with this patch and solve the problem in a better way. I have now pulled in everything up to 39cb263ecc "ARM: S3C64XX: Hook up VDDINT on Cragganmore" into a samsung/board branch and merged that into the next/board branch, because that was easy to do without rebasing. The rest should be fairly easy to split up into the branches I mentioned if you don't mind rebasing them (best leaving them on v3.2-rc1 though). Without rebasing, it would get a bit trickier but we could easily make 39ae3685 "ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN" the samsung/dt branch and revert the ioremap interceptor on top of that. The samsung/clkdev branch probably should depend on the samsung/dt branch anyway, so it can remain on top without getting rebased. I can probably fix this all up (this time) in the way I want it, or let you take care of it and send me new pull requests, whichever you prefer. Arnd ^ permalink raw reply [flat|nested] 3+ messages in thread
* [GIT PULL] Samsung devel-1 for v3.3 2011-12-16 15:22 ` Arnd Bergmann @ 2011-12-18 15:57 ` Kukjin Kim 0 siblings, 0 replies; 3+ messages in thread From: Kukjin Kim @ 2011-12-18 15:57 UTC (permalink / raw) To: linux-arm-kernel On 12/17/11 00:22, Arnd Bergmann wrote: > On Friday 16 December 2011, Kukjin Kim wrote: >> Please pull next-samsung-devel for v3.3. >> It includes DT support for EXYNOS, update Cragganmore board and SPI clkdev >> support. As a note, out of arch/arm/samsung stuff got the ack from regarding >> maintainers and actually, it has been included in linux-next for long time >> so I think, it has no problem for v3.3. >> >> One more, I need to follow up Russell and some arm consolidation work and >> one plat-samsung directory and apply some patches in my mail-box ;) It will >> be sent to you soon. >> >> If any problems, please let me know. > > The patches look really good for the most part, but I'd rather not take > them like this because you have put so many different things into a single > branch. Your branch is much larger than any of the others that are currently > queued in arm-soc. > > Can you split it up into separate branches for dt, board and clkdev and > driver changes or something along those lines? Sure, I will re-send 'pull request' with separated topic branches. > A number of changes in here also seem to qualify as cleanups, > so they might better be held in a branch for that. I'm not sure which commits are cleanups what you said, but let me sort them out again when I re-send. > > I also found one commit that I think should not be there: 25767e69 "ARM: > EXYNOS: Add ioremap interceptor for statically remapped regions" from > Thomas Abraham. As far as I know, the work that Nico did on the vmalloc_end > elimination will conflict with this patch and solve the problem in a better > way. Yes, you're right. There are discussions about Nicolas' patch when it was submitted and since it was not available at that time, it has been added into my tree before 3.2 merge window. Anyway, let me sort it out. > > I have now pulled in everything up to 39cb263ecc "ARM: S3C64XX: Hook up > VDDINT on Cragganmore" into a samsung/board branch and merged that into > the next/board branch, because that was easy to do without rebasing. Well, I think it should be included in next/devel branch, because they are developing of Cragganmore boards not adding new board which is the purpose of next/board branch what you said. But if you want it, I will. > > The rest should be fairly easy to split up into the branches I mentioned > if you don't mind rebasing them (best leaving them on v3.2-rc1 though). > Without rebasing, it would get a bit trickier but we could easily make > 39ae3685 "ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and > ORIGEN" the samsung/dt branch and revert the ioremap interceptor on top > of that. The samsung/clkdev branch probably should depend on the samsung/dt > branch anyway, so it can remain on top without getting rebased. Okay, I will. > > I can probably fix this all up (this time) in the way I want it, or let you > take care of it and send me new pull requests, whichever you prefer. Let me sort our my branches soon :) Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-12-18 15:57 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-12-16 7:44 [GIT PULL] Samsung devel-1 for v3.3 Kukjin Kim 2011-12-16 15:22 ` Arnd Bergmann 2011-12-18 15:57 ` Kukjin Kim
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).