From mboxrd@z Thu Jan 1 00:00:00 1970 From: rmallon@gmail.com (Ryan Mallon) Date: Thu, 19 Jan 2012 08:53:54 +1100 Subject: [PATCH 3/4] at91 : remove wait_for_interrupt definition In-Reply-To: <1326843620-13148-4-git-send-email-daniel.lezcano@linaro.org> References: <1326843620-13148-1-git-send-email-daniel.lezcano@linaro.org> <1326843620-13148-4-git-send-email-daniel.lezcano@linaro.org> Message-ID: <4F173F72.3050506@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 18/01/12 10:40, Daniel Lezcano wrote: > All the "wait_for_interrupt" definition are aliases to cpu_do_idle. > Only the rm9200 has an asm routine to switch to wfi. But the cpu_do_idle > for this platform has exactly the same asm routine. > > arch/arm/mm/proc-arm920.S > ... > ENTRY(cpu_arm920_do_idle) > mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt > ... > > Then it is safe to invoke cpu_do_idle for this platform. As all the > wait_for_interrupts are definition for cpu_do_idle, let's remove it > and replace its invokation by cpu_do_idle. > > Signed-off-by: Daniel Lezcano This patch looks like an improvement. Though, because you are removing all of the definitions of wait_for_interrupt_enable in this patch, it doesn't seem worth fixing the coding style of them in patch 1 of this series. Reviewed-by: Ryan Mallon > --- > arch/arm/mach-at91/pm.c | 2 +- > arch/arm/mach-at91/pm.h | 12 ------------ > 2 files changed, 1 insertions(+), 13 deletions(-) > > diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c > index 62ad955..acf32c7 100644 > --- a/arch/arm/mach-at91/pm.c > +++ b/arch/arm/mach-at91/pm.c > @@ -272,7 +272,7 @@ static int at91_pm_enter(suspend_state_t state) > : /* no input */ > : "r0"); > saved_lpr = sdram_selfrefresh_enable(); > - wait_for_interrupt_enable(); > + cpu_do_idle(); > sdram_selfrefresh_disable(saved_lpr); > break; > > diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h > index 325ef76..624c99c 100644 > --- a/arch/arm/mach-at91/pm.h > +++ b/arch/arm/mach-at91/pm.h > @@ -36,10 +36,6 @@ static inline u32 sdram_selfrefresh_enable(void) > #define sdram_selfrefresh_disable(saved_lpr) \ > at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) > > -#define wait_for_interrupt_enable() \ > - asm volatile ("mcr p15, 0, %0, c7, c0, 4" \ > - : : "r" (0)) > - > #elif defined(CONFIG_ARCH_AT91CAP9) > #include > > @@ -58,9 +54,6 @@ static inline u32 sdram_selfrefresh_enable(void) > #define sdram_selfrefresh_disable(saved_lpr) \ > at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr) > > -#define wait_for_interrupt_enable() \ > - cpu_do_idle() > - > #elif defined(CONFIG_ARCH_AT91SAM9G45) > #include > > @@ -97,8 +90,6 @@ static inline u32 sdram_selfrefresh_enable(void) > at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \ > } while (0) > > -#define wait_for_interrupt_enable() cpu_do_idle() > - > #else > #include > > @@ -125,9 +116,6 @@ static inline u32 sdram_selfrefresh_enable(void) > #define sdram_selfrefresh_disable(saved_lpr) \ > at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr) > > -#define wait_for_interrupt_enable() \ > - cpu_do_idle() > - > #endif > > #endif