From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 14/25] irq_domain: Remove irq_domain_add_simple()
Date: Tue, 31 Jan 2012 07:15:26 -0600 [thread overview]
Message-ID: <4F27E96E.9010204@gmail.com> (raw)
In-Reply-To: <20120131124500.GA28571@S2101-09.ap.freescale.net>
Shawn,
On 01/31/2012 06:45 AM, Shawn Guo wrote:
> On Fri, Jan 27, 2012 at 02:36:08PM -0700, Grant Likely wrote:
>> irq_domain_add_simple() was a stop-gap measure until complete irq_domain
>> support was complete. This patch removes the irq_domain_add_simple()
>> interface.
>>
>> v2: Updated to pass in host_data pointer on irq_domain allocation.
>>
>> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
>> Cc: Rob Herring <rob.herring@calxeda.com>
>> Cc: Thomas Gleixner <tglx@linutronix.de>
>> Cc: Milton Miller <miltonm@bga.com>
>> ---
>> arch/arm/mach-imx/mach-imx6q.c | 3 ++-
>> arch/arm/mach-msm/board-msm8x60.c | 8 ++------
>> arch/arm/mach-mx5/imx51-dt.c | 4 ++--
>> arch/arm/mach-mx5/imx53-dt.c | 4 ++--
>> arch/arm/mach-omap2/board-generic.c | 2 +-
>> arch/arm/mach-prima2/irq.c | 2 +-
>> drivers/mfd/twl-core.c | 2 +-
>> include/linux/irqdomain.h | 1 -
>> kernel/irq/irqdomain.c | 10 ++--------
>> 9 files changed, 13 insertions(+), 23 deletions(-)
>>
> ...
>> --- a/arch/arm/mach-mx5/imx51-dt.c
>> +++ b/arch/arm/mach-mx5/imx51-dt.c
>> @@ -47,7 +47,7 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
>> static int __init imx51_tzic_add_irq_domain(struct device_node *np,
>> struct device_node *interrupt_parent)
>> {
>> - irq_domain_add_simple(np, 0);
>> + irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
>> return 0;
>> }
>>
>> @@ -57,7 +57,7 @@ static int __init imx51_gpio_add_irq_domain(struct device_node *np,
>> static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
>>
>> gpio_irq_base -= 32;
>> - irq_domain_add_simple(np, gpio_irq_base);
>> + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
>
> The tzic on imx5 gets 128 irq lines rather than 32 here. The current
> code will make any hwirq that is > 32 hit the WARN_ON below in
> irq_domain_legacy_revmap().
But this is the gpio controller code? Really this should be 4 domains,
but this temp fix is probably fine until you use my generic irq chip
support.
Rob
>
> WARN_ON(hwirq < first_hwirq || hwirq >= first_hwirq + size)
>
> The first_hwirq is 0 and size is 32 in this case.
>
> Changing 32 to 128 seems fixing the problem.
>
next prev parent reply other threads:[~2012-01-31 13:15 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-27 21:35 [PATCH v3 00/25] irq_domain generalization and refinement Grant Likely
2012-01-27 21:35 ` [PATCH v3 01/25] irq_domain: add documentation and MAINTAINERS entry Grant Likely
2012-01-28 18:23 ` Randy Dunlap
2012-01-27 21:35 ` [PATCH v3 02/25] dt: Make irqdomain less verbose Grant Likely
2012-01-27 21:35 ` [PATCH v3 03/25] irq_domain: Make irq_domain structure match powerpc's irq_host Grant Likely
2012-01-27 21:35 ` [PATCH v3 04/25] irq_domain: convert microblaze from irq_host to irq_domain Grant Likely
2012-01-27 21:35 ` [PATCH v3 05/25] irq_domain/powerpc: Use common irq_domain structure instead of irq_host Grant Likely
2012-01-27 21:36 ` [PATCH v3 06/25] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead Grant Likely
2012-01-27 21:36 ` [PATCH v3 07/25] irq_domain/powerpc: Eliminate virq_is_host() Grant Likely
2012-01-27 21:36 ` [PATCH v3 08/25] irq_domain: Move irq_domain code from powerpc to kernel/irq Grant Likely
2012-01-27 21:36 ` [PATCH v3 09/25] irqdomain: remove NO_IRQ from irq domain code Grant Likely
2012-01-27 21:36 ` [PATCH v3 10/25] irq_domain: Remove references to old irq_host names Grant Likely
2012-01-27 21:36 ` [PATCH v3 11/25] irq_domain: Replace irq_alloc_host() with revmap-specific initializers Grant Likely
2012-01-27 21:36 ` [PATCH v3 12/25] irq_domain: Add support for base irq and hwirq in legacy mappings Grant Likely
2012-01-27 21:36 ` [PATCH v3 13/25] irq_domain: Remove 'new' irq_domain in favour of the ppc one Grant Likely
2012-02-03 14:48 ` Cousson, Benoit
2012-02-03 16:42 ` Grant Likely
2012-01-27 21:36 ` [PATCH v3 14/25] irq_domain: Remove irq_domain_add_simple() Grant Likely
2012-01-31 12:45 ` Shawn Guo
2012-01-31 13:15 ` Rob Herring [this message]
2012-01-31 13:58 ` Shawn Guo
2012-02-01 0:08 ` Grant Likely
2012-02-01 5:46 ` [PATCH] irq_domain: fix the irq number of imx5 tzic Shawn Guo
2012-02-02 4:58 ` Grant Likely
2012-01-27 21:36 ` [PATCH v3 15/25] irq_domain: Create common xlate functions that device drivers can use Grant Likely
2012-01-27 21:36 ` [PATCH v3 16/25] irq_domain: constify irq_domain_ops Grant Likely
2012-01-27 21:36 ` [PATCH v3 17/25] irq_domain/c6x: Convert c6x to use generic irq_domain support Grant Likely
2012-01-27 21:36 ` [PATCH v3 18/25] irq_domain/c6x: constify irq_domain structures Grant Likely
2012-01-27 21:36 ` [PATCH v3 19/25] irq_domain/c6x: Use library of xlate functions Grant Likely
2012-01-27 21:36 ` [PATCH v3 20/25] irq_domain/powerpc: constify irq_domain_ops Grant Likely
2012-01-27 21:36 ` [PATCH v3 21/25] irqdomain/powerpc: Replace custom xlate functions with library functions Grant Likely
2012-02-06 5:22 ` Michael Neuling
2012-02-06 6:00 ` Grant Likely
2012-01-27 21:36 ` [PATCH v3 22/25] irq_domain/x86: Convert x86 (embedded) to use common irq_domain Grant Likely
2012-01-28 16:44 ` Sebastian Andrzej Siewior
2012-01-29 0:35 ` Grant Likely
2012-01-29 0:39 ` Grant Likely
2012-01-30 19:58 ` Grant Likely
2012-02-01 14:17 ` Sebastian Andrzej Siewior
2012-02-01 18:06 ` Grant Likely
2012-02-23 19:56 ` Grant Likely
2012-02-23 21:22 ` Sebastian Andrzej Siewior
2012-02-23 21:39 ` Grant Likely
2012-01-27 21:36 ` [PATCH v3 23/25] irq_domain: Include hwirq number in /proc/interrupts Grant Likely
2012-01-27 21:36 ` [PATCH v3 24/25] irq_domain: remove "hint" when allocating irq numbers Grant Likely
2012-02-07 18:07 ` Nicolas Ferre
2012-02-15 15:04 ` Nicolas Ferre
2012-02-15 20:21 ` Grant Likely
2012-02-15 21:50 ` Shawn Guo
2012-02-16 5:32 ` Grant Likely
2012-02-16 6:03 ` Shawn Guo
2012-01-27 21:36 ` [PATCH v3 25/25] irq_domain: mostly eliminate slow-path revmap lookups Grant Likely
2012-02-15 16:36 ` Nicolas Ferre
2012-02-15 20:29 ` Grant Likely
2012-01-28 18:38 ` [PATCH v3 00/25] irq_domain generalization and refinement Rob Herring
2012-01-31 4:53 ` Olof Johansson
2012-02-01 0:07 ` Grant Likely
2012-02-04 22:17 ` Russell King - ARM Linux
2012-02-04 22:31 ` Russell King - ARM Linux
2012-02-05 1:38 ` Tony Lindgren
2012-02-05 16:13 ` Russell King - ARM Linux
2012-02-07 15:26 ` Mark Brown
2012-02-15 20:33 ` Grant Likely
2012-02-05 0:01 ` Benjamin Herrenschmidt
2012-02-06 0:51 ` Rob Herring
2012-02-06 5:56 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F27E96E.9010204@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).