From: b32955@freescale.com (Huang Shijie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/2] patch set about the MXS-DMA
Date: Wed, 1 Feb 2012 10:21:35 +0800 [thread overview]
Message-ID: <4F28A1AF.8040402@freescale.com> (raw)
In-Reply-To: <1327044818-4464-1-git-send-email-b32955@freescale.com>
hi,
> patch 1: move the mxs dma header to a more common place.
> Beside the mx23/mx28, the apbh-dma is also used by MX50 and MX6Q.
> So move the mxs dma header file to a more common place, and rename
> it to mxs-dma.h
>
> patch 2: rewrite the last parameter of mxs_dma_prep_slave_sg().
> In the new GPMI version, some hardware behavior changes.
> The WAIT4END bit should be set in the middle one of the ECC READ page DMA chain.
> The DMA chain should be set like this:
>
> +-----+ +-----+ +-----+
> | cmd | ------------> | cmd | ------------------> | cmd |
> +-----+ +-----+ +-----+
> ^ ^
> | |
> | |
> set WAIT4END here too set WAIT4END here
>
> So rewrite the last parameter of mxs_dma_prep_slave_sg(), use the
> dma_ctrl_flags to set the proper DMA bit for DMA Command Structure.
> And change the relative drivers with the dma_ctrl_flags.
>
> TEST:
> Tested the mxs-mmc driver and gpmi-nand drive with the two patches
> in MX28 board.
>
> v1 --> v2:
> [1] squash the trial patches into single patch.
> [2] use the dma_ctrl_flags.
>
> Huang Shijie (2):
> mxs-dma : move the mxs dma.h to a more common place
> mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg()
>
> drivers/dma/mxs-dma.c | 34 +++++++++++++++++---
> drivers/mmc/host/mxs-mmc.c | 12 +++---
> drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 28 +++++++++++++---
> drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 +++-
> drivers/mtd/nand/gpmi-nand/gpmi-regs.h | 2 +
> .../include/mach/dma.h => include/linux/mxs-dma.h | 0
> sound/soc/mxs/mxs-pcm.c | 2 +-
> sound/soc/mxs/mxs-pcm.h | 2 +-
> sound/soc/mxs/mxs-saif.c | 2 +-
> 9 files changed, 67 insertions(+), 21 deletions(-)
> rename arch/arm/mach-mxs/include/mach/dma.h => include/linux/mxs-dma.h (100%)
>
ping.
Could these two patches ok ?
My following patches depend upon them.
BR
Huang Shijie
prev parent reply other threads:[~2012-02-01 2:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-20 7:33 [PATCH v2 0/2] patch set about the MXS-DMA Huang Shijie
2012-01-20 7:33 ` [PATCH v2 1/2] mxs-dma : move the mxs dma.h to a more common place Huang Shijie
2012-01-20 7:33 ` [PATCH v2 2/2] mxs-dma : rewrite the last parameter of mxs_dma_prep_slave_sg() Huang Shijie
2012-02-03 1:57 ` Huang Shijie
2012-02-01 2:21 ` Huang Shijie [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F28A1AF.8040402@freescale.com \
--to=b32955@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).