[PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs

linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP
@ 2012-02-15 22:55 Kukjin Kim
  2012-02-15 22:55 ` [PATCH 01/12] ARM: S3C24XX: remove unused spi gpio setup functions Kukjin Kim
                   ` (11 more replies)
  0 siblings, 12 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

This patch aims to make a one mach- directory for S3C24XX SoCs
and now not finished yet such as moving cpufreq and merging
plat-s3c24xx/. I think it will be done maybe in a week.

[PATCH 01/12] ARM: S3C24XX: remove unused spi gpio setup functions
[PATCH 02/12] ARM: S3C24XX: move spi-s3c24xx platdata out of mach
[PATCH 03/12] ARM: S3C24XX: Remove extern declaration of clk_msysclk
[PATCH 04/12] ARM: S3C24XX: move common S3C2443 clock definitions to
[PATCH 05/12] ARM: S3C2410: move s3c2410_baseclk_add to clock.h
[PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
[PATCH 07/12] ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/
[PATCH 08/12] ARM: S3C2412: move mach-s3c2412/* into mach-s3c24xx/
[PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
[PATCH 10/12] ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/
[PATCH 11/12] ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 01/12] ARM: S3C24XX: remove unused spi gpio setup functions
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-15 22:55 ` [PATCH 02/12] ARM: S3C24XX: move spi-s3c24xx platdata out of mach Kukjin Kim
                   ` (10 subsequent siblings)
  11 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Heiko Stuebner <heiko@sntech.de>

A grep through the kernel source revealed that neither the
config-options nor the defined functions are used anywhere
in the kernel.

There was also no activity in this regard through the last kernel
releases, so it seems this situation will not change in the future.

Therefore this patch removes this seemingly dead code.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2410/include/mach/spi.h     |   11 -------
 arch/arm/plat-s3c24xx/Kconfig                |   20 -------------
 arch/arm/plat-s3c24xx/Makefile               |    6 ----
 arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c |   36 ------------------------
 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c   |   38 --------------------------
 arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c    |   36 ------------------------
 6 files changed, 0 insertions(+), 147 deletions(-)
 delete mode 100644 arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
 delete mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
 delete mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c

diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 4d95883..2a686c0 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -24,15 +24,4 @@ struct s3c2410_spi_info {
 	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
 
-/* Standard setup / suspend routines for SPI GPIO pins. */
-
-extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
-						 int enable);
-
-extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
-					      int enable);
-
-extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
-					       int enable);
-
 #endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index d8973ac..6b1d918 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -98,26 +98,6 @@ config S3C2410_DMA_DEBUG
 	  Enable debugging output for the DMA code. This option sends info
 	  to the kernel log, at priority KERN_DEBUG.
 
-# SPI default pin configuration code
-
-config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
-	bool
-	help
-	  SPI GPIO configuration code for BUS0 when connected to
-	  GPE11, GPE12 and GPE13.
-
-config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
-	bool
-	help
-	  SPI GPIO configuration code for BUS 1 when connected to
-	  GPG5, GPG6 and GPG7.
-
-config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
-	bool
-	help
-	  SPI GPIO configuration code for BUS 1 when connected to
-	  GPD8, GPD9 and GPD10.
-
 # common code for s3c24xx based machines, such as the SMDKs.
 
 # cpu frequency items common between s3c2410 and s3c2440/s3c2442
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index b2b0112..7cefd7f 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -38,12 +38,6 @@ obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
 obj-$(CONFIG_S3C2410_SETUP_TS)	+= setup-ts.o
 
-# SPI gpio central GPIO functions
-
-obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
-obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7)    += spi-bus1-gpg5_6_7.o
-obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)	 += spi-bus1-gpd8_9_10.o
-
 # machine common support
 
 obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
deleted file mode 100644
index 704175b..0000000
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <mach/spi.h>
-#include <mach/regs-gpio.h>
-
-void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
-					  int enable)
-{
-	if (enable) {
-		s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
-		s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
-		s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
-		s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
-		s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
-	} else {
-		s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
-		s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
-		s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
-		s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
-	}
-}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
deleted file mode 100644
index 72457af..0000000
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <mach/spi.h>
-#include <mach/regs-gpio.h>
-
-void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
-					int enable)
-{
-
-	printk(KERN_INFO "%s(%d)\n", __func__, enable);
-	if (enable) {
-		s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
-		s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
-		s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
-		s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
-		s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
-	} else {
-		s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
-		s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
-		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
-		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
-	}
-}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
deleted file mode 100644
index c3972b6..0000000
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <mach/spi.h>
-#include <mach/regs-gpio.h>
-
-void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
-				       int enable)
-{
-	if (enable) {
-		s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
-		s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
-		s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
-		s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
-		s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
-	} else {
-		s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
-		s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
-		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
-		s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
-	}
-}
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 02/12] ARM: S3C24XX: move spi-s3c24xx platdata out of mach
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
  2012-02-15 22:55 ` [PATCH 01/12] ARM: S3C24XX: remove unused spi gpio setup functions Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-15 22:55 ` [PATCH 03/12] ARM: S3C24XX: Remove extern declaration of clk_msysclk Kukjin Kim
                   ` (9 subsequent siblings)
  11 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Heiko Stuebner <heiko@sntech.de>

spi.h now only contains the definition of the platform data structure
for the driver in spi-s3c24xx.c . Therefore it does not need to stay
in include/mach but can instead live in linux/spi/s3c24xx.h .

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2440/mach-gta02.c                 |    2 +-
 drivers/spi/spi-s3c24xx.c                          |    2 +-
 .../mach/spi.h => include/linux/spi/s3c24xx.h      |    9 ++++-----
 3 files changed, 6 insertions(+), 7 deletions(-)
 rename arch/arm/mach-s3c2410/include/mach/spi.h => include/linux/spi/s3c24xx.h (82%)

diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 5859e60..cf270f5 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -38,6 +38,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
 
 #include <linux/mmc/host.h>
 
@@ -73,7 +74,6 @@
 #include <mach/regs-gpioj.h>
 #include <mach/fb.h>
 
-#include <mach/spi.h>
 #include <plat/usb-control.h>
 #include <mach/regs-mem.h>
 #include <mach/hardware.h>
diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c
index fc06453..8ee7d79 100644
--- a/drivers/spi/spi-s3c24xx.c
+++ b/drivers/spi/spi-s3c24xx.c
@@ -24,10 +24,10 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
+#include <linux/spi/s3c24xx.h>
 #include <linux/module.h>
 
 #include <plat/regs-spi.h>
-#include <mach/spi.h>
 
 #include <plat/fiq.h>
 #include <asm/fiq.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/include/linux/spi/s3c24xx.h
similarity index 82%
rename from arch/arm/mach-s3c2410/include/mach/spi.h
rename to include/linux/spi/s3c24xx.h
index 2a686c0..c23b923 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/include/linux/spi/s3c24xx.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/spi.h
- *
+/*
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -10,8 +9,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_SPI_H
-#define __ASM_ARCH_SPI_H __FILE__
+#ifndef __LINUX_SPI_S3C24XX_H
+#define __LINUX_SPI_S3C24XX_H __FILE__
 
 struct s3c2410_spi_info {
 	int			 pin_cs;	/* simple gpio cs */
@@ -24,4 +23,4 @@ struct s3c2410_spi_info {
 	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
 
-#endif /* __ASM_ARCH_SPI_H */
+#endif /* __LINUX_SPI_S3C24XX_H */
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 03/12] ARM: S3C24XX: Remove extern declaration of clk_msysclk
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
  2012-02-15 22:55 ` [PATCH 01/12] ARM: S3C24XX: remove unused spi gpio setup functions Kukjin Kim
  2012-02-15 22:55 ` [PATCH 02/12] ARM: S3C24XX: move spi-s3c24xx platdata out of mach Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-15 22:55 ` [PATCH 04/12] ARM: S3C24XX: move common S3C2443 clock definitions to clock.h Kukjin Kim
                   ` (8 subsequent siblings)
  11 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Heiko Stuebner <heiko@sntech.de>

clk_msysclk is not needed outside of s3c2443-clock.c.

Removing the extern declaration will prevent conflicts with the
s3c2412 clk_msysclk in the following cleanups.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/include/plat/s3c2443.h |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index dce05b4..ffaecb9 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -51,4 +51,3 @@ extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
 
 extern struct clksrc_clk clk_epllref;
 extern struct clksrc_clk clk_esysclk;
-extern struct clksrc_clk clk_msysclk;
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 04/12] ARM: S3C24XX: move common S3C2443 clock definitions to clock.h
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
                   ` (2 preceding siblings ...)
  2012-02-15 22:55 ` [PATCH 03/12] ARM: S3C24XX: Remove extern declaration of clk_msysclk Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-15 22:55 ` [PATCH 05/12] ARM: S3C2410: move s3c2410_baseclk_add " Kukjin Kim
                   ` (7 subsequent siblings)
  11 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Heiko Stuebner <heiko@sntech.de>

plat-samsung/clock.h currently keeps all the SoC specific clock
declarations except the ones for S3C2443/S3C2416 which were kept in
s3c2443.h.

This patch moves them out of s3c2443.h to get rid of the header
completely later on.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2416/clock.c                |    1 -
 arch/arm/plat-s3c24xx/s3c2443-clock.c        |    1 -
 arch/arm/plat-samsung/include/plat/clock.h   |   17 +++++++++++++++++
 arch/arm/plat-samsung/include/plat/s3c2443.h |   19 -------------------
 4 files changed, 17 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 59f54d1..5e36905 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -15,7 +15,6 @@
 #include <linux/clk.h>
 
 #include <plat/s3c2416.h>
-#include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 95e6819..3633060 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -12,7 +12,6 @@
 
 #include <mach/regs-s3c2443-clock.h>
 
-#include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/cpu.h>
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index 73c66d4..42bbe3d 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -79,6 +79,10 @@ extern struct clk clk_epll;
 extern struct clk clk_xtal;
 extern struct clk clk_ext;
 
+/* S3C2443/S3C2416 specific clocks */
+extern struct clksrc_clk clk_epllref;
+extern struct clksrc_clk clk_esysclk;
+
 /* S3C64XX specific clocks */
 extern struct clk clk_h2;
 extern struct clk clk_27m;
@@ -116,6 +120,19 @@ extern void s3c2412_setup_clocks(void);
 extern void s3c244x_setup_clocks(void);
 extern void s3c2443_setup_clocks(void);
 
+/* S3C2443/S3C2416 specific clock functions */
+
+typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
+
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
+				       unsigned int *divs, int nr_divs,
+				       int divmask);
+
+extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
+
 /* S3C64XX specific functions and clocks */
 
 extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index ffaecb9..a5b794f 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -32,22 +32,3 @@ extern void s3c2443_restart(char mode, const char *cmd);
 #define s3c2443_init NULL
 #define s3c2443_restart NULL
 #endif
-
-/* common code used by s3c2443 and others.
- * note, not to be used outside of arch/arm/mach-s3c* */
-
-struct clk;	/* some files don't need clk.h otherwise */
-
-typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
-
-extern void s3c2443_common_setup_clocks(pll_fn get_mpll);
-extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       unsigned int *divs, int nr_divs,
-				       int divmask);
-
-extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
-
-extern struct clksrc_clk clk_epllref;
-extern struct clksrc_clk clk_esysclk;
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 05/12] ARM: S3C2410: move s3c2410_baseclk_add to clock.h
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
                   ` (3 preceding siblings ...)
  2012-02-15 22:55 ` [PATCH 04/12] ARM: S3C24XX: move common S3C2443 clock definitions to clock.h Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-15 22:55 ` [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX Kukjin Kim
                   ` (6 subsequent siblings)
  11 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

From: Heiko Stuebner <heiko@sntech.de>

plat-samsung/clock.h currently keeps all the SoC specific clock
declarations. As we want to get rid of s3c2410.h altogether, move
the s3c2410_baseclk_add there too.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/include/plat/clock.h   |    4 ++++
 arch/arm/plat-samsung/include/plat/s3c2410.h |    2 --
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index 42bbe3d..3b5a9dc 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -120,6 +120,10 @@ extern void s3c2412_setup_clocks(void);
 extern void s3c244x_setup_clocks(void);
 extern void s3c2443_setup_clocks(void);
 
+/* S3C2410 specific clock functions */
+
+extern int s3c2410_baseclk_add(void);
+
 /* S3C2443/S3C2416 specific clock functions */
 
 typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
diff --git a/arch/arm/plat-samsung/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h
index 3986497..55b0e5f 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2410.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2410.h
@@ -29,5 +29,3 @@ extern void s3c2410_init_clocks(int xtal);
 #define s3c2410_init NULL
 #define s3c2410a_init NULL
 #endif
-
-extern int s3c2410_baseclk_add(void);
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
                   ` (4 preceding siblings ...)
  2012-02-15 22:55 ` [PATCH 05/12] ARM: S3C2410: move s3c2410_baseclk_add " Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-16  9:21   ` Felipe Balbi
  2012-02-19 22:53   ` Florian Tobias Schandinat
  2012-02-15 22:55 ` [PATCH 07/12] ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/ Kukjin Kim
                   ` (5 subsequent siblings)
  11 siblings, 2 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung
S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443,
and S3C2450 SoCs so that we can merge the mach-xxx directories
and plat-s3c24xx dir. to just one mach-s3c24xx for them.

I think this should be sent to upstream via samsung tree because
this touches many samsung stuff.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/Kconfig                      |   23 +++++++++++------------
 arch/arm/Makefile                     |    2 +-
 arch/arm/boot/compressed/head.S       |    2 +-
 arch/arm/configs/mini2440_defconfig   |    2 +-
 arch/arm/configs/s3c2410_defconfig    |    2 +-
 arch/arm/configs/tct_hammer_defconfig |    2 +-
 arch/arm/mach-s3c2410/Kconfig         |    2 +-
 arch/arm/mach-s3c2412/Kconfig         |    4 ++--
 arch/arm/mach-s3c2416/Kconfig         |    2 +-
 arch/arm/mach-s3c2443/Kconfig         |    2 +-
 arch/arm/plat-s3c24xx/Kconfig         |    6 +++---
 arch/arm/plat-s3c24xx/Makefile        |    2 +-
 arch/arm/plat-samsung/Kconfig         |    4 ++--
 drivers/input/touchscreen/Kconfig     |    2 +-
 drivers/leds/Kconfig                  |    2 +-
 drivers/mmc/host/Kconfig              |    2 +-
 drivers/mtd/nand/Kconfig              |    2 +-
 drivers/rtc/Kconfig                   |    2 +-
 drivers/spi/Kconfig                   |    2 +-
 drivers/usb/Kconfig                   |    2 +-
 drivers/usb/gadget/Kconfig            |    4 ++--
 drivers/usb/host/ohci-hcd.c           |    2 +-
 drivers/video/Kconfig                 |    2 +-
 drivers/watchdog/Kconfig              |    2 +-
 sound/soc/samsung/Kconfig             |   12 ++++++------
 25 files changed, 45 insertions(+), 46 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 24626b0..5f1a3ad 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -763,22 +763,21 @@ config ARCH_SA1100
 	help
 	  Support for StrongARM 11x0 based boards.
 
-config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
+config ARCH_S3C24XX
+	bool "Samsung S3C24XX SoCs"
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
-	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
-	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
-	  the Samsung SMDK2410 development board (and derivatives).
-
-	  Note, the S3C2416 and the S3C2450 are so close that they even share
-	  the same SoC ID code. This means that there is no separate machine
-	  directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
+	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
+	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
+	  Samsung SMDK2410 development board (and derivatives).
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
@@ -1068,7 +1067,7 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
-if ARCH_S3C2410
+if ARCH_S3C24XX
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
 source "arch/arm/mach-s3c2416/Kconfig"
@@ -1590,7 +1589,7 @@ source kernel/Kconfig.preempt
 
 config HZ
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
+	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
@@ -2116,7 +2115,7 @@ config CPU_FREQ_S3C
 
 config CPU_FREQ_S3C24XX
 	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
-	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL
 	select CPU_FREQ_S3C
 	help
 	  This enables the CPUfreq driver for the Samsung S3C24XX family
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 40319d9..624f764 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -175,7 +175,7 @@ machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
+machine-$(CONFIG_ARCH_S3C24XX)		:= s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c5d6025..5f6045f 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -58,7 +58,7 @@
 		add	\rb, \rb, #0x00010000	@ Ser1
 #endif
 		.endm
-#elif defined(CONFIG_ARCH_S3C2410)
+#elif defined(CONFIG_ARCH_S3C24XX)
 		.macro loadsp, rb, tmp
 		mov	\rb, #0x50000000
 		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 2472a95..42da918 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_ARCH_S3C2410=y
+CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f9096c1..8746c00 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -9,7 +9,7 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S3C2410=y
+CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 95c0f0d..1d24f84 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -14,7 +14,7 @@ CONFIG_SLOB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S3C2410=y
+CONFIG_ARCH_S3C24XX=y
 CONFIG_MACH_TCT_HAMMER=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 5261a7e..ce62099 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -4,7 +4,7 @@
 
 config CPU_S3C2410
 	bool
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select CPU_ARM920T
 	select S3C2410_CLOCK
 	select CPU_LLSERIAL_S3C2410
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index b8b9029..41f3327 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -4,7 +4,7 @@
 
 config CPU_S3C2412
 	bool
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_PM if PM
@@ -14,7 +14,7 @@ config CPU_S3C2412
 
 config CPU_S3C2412_ONLY
 	bool
-	depends on ARCH_S3C2410 && !CPU_S3C2410 && \
+	depends on ARCH_S3C24XX && !CPU_S3C2410 && \
 		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
 		   !CPU_S3C2443 && CPU_S3C2412
 	default y if CPU_S3C2412
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 84c7b03..53d5c2b 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -9,7 +9,7 @@
 
 config CPU_S3C2416
 	bool
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select CPU_ARM926T
 	select S3C2416_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 8814031..793a0fe 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -4,7 +4,7 @@
 
 config CPU_S3C2443
 	bool
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select CPU_ARM920T
 	select S3C2443_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 6b1d918..5a67eda 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -4,7 +4,7 @@
 
 config PLAT_S3C24XX
 	bool
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
@@ -84,7 +84,7 @@ config PM_SIMTEC
 
 config S3C2410_DMA
 	bool "S3C2410 DMA support"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select S3C_DMA
 	help
 	  S3C2410 DMA support. This is needed for drivers like sound which
@@ -93,7 +93,7 @@ config S3C2410_DMA
 
 config S3C2410_DMA_DEBUG
 	bool "S3C2410 DMA support debug"
-	depends on ARCH_S3C2410 && S3C2410_DMA
+	depends on ARCH_S3C24XX && S3C2410_DMA
 	help
 	  Enable debugging output for the DMA code. This option sends info
 	  to the kernel log, at priority KERN_DEBUG.
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 7cefd7f..32bd295 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -35,7 +35,7 @@ obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
-obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
+obj-$(CONFIG_ARCH_S3C24XX)	+= setup-i2c.o
 obj-$(CONFIG_S3C2410_SETUP_TS)	+= setup-ts.o
 
 # machine common support
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 6a2abe6..71553f4 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -205,7 +205,7 @@ config S3C_DEV_USB_HSOTG
 
 config S3C_DEV_WDT
 	bool
-	default y if ARCH_S3C2410
+	default y if ARCH_S3C24XX
 	help
 	  Complie in platform device definition for Watchdog Timer
 
@@ -264,7 +264,7 @@ config SAMSUNG_DEV_KEYPAD
 
 config SAMSUNG_DEV_PWM
 	bool
-	default y if ARCH_S3C2410
+	default y if ARCH_S3C24XX
 	help
 	  Compile in platform device definition for PWM Timer
 
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 4af2a18..b306168 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -215,7 +215,7 @@ config TOUCHSCREEN_FUJITSU
 
 config TOUCHSCREEN_S3C2410
 	tristate "Samsung S3C2410/generic touchscreen input driver"
-	depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
+	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 	select S3C_ADC
 	help
 	  Say Y here if you have the s3c2410 touchscreen.
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c957c34..2ba64ca 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -69,7 +69,7 @@ config LEDS_MIKROTIK_RB532
 config LEDS_S3C24XX
 	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
 	depends on LEDS_CLASS
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	help
 	  This option enables support for LEDs connected to GPIO lines
 	  on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index cf444b0..f31f7cb 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -395,7 +395,7 @@ config MMC_SPI
 
 config MMC_S3C
 	tristate "Samsung S3C SD/MMC Card Interface support"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	help
 	  This selects a driver for the MCI interface found in
           Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 31b034b..92e8559 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -187,7 +187,7 @@ config MTD_NAND_PPCHAMELEONEVB
 
 config MTD_NAND_S3C2410
 	tristate "NAND Flash support for Samsung S3C SoCs"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C24XX || ARCH_S3C64XX
 	help
 	  This enables the NAND flash controller on the S3C24xx and S3C64xx
 	  SoCs
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e19a403..cb7df33 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -748,7 +748,7 @@ config HAVE_S3C_RTC
 
 config RTC_DRV_S3C
 	tristate "Samsung S3C series SoC RTC"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX || HAVE_S3C_RTC
+	depends on ARCH_S3C64XX || HAVE_S3C_RTC
 	help
 	  RTC (Realtime Clock) driver for the clock inbuilt into the
 	  Samsung S3C24XX series of SoCs. This can provide periodic
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3f9a47e..e980700 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -281,7 +281,7 @@ config SPI_PXA2XX_PCI
 
 config SPI_S3C24XX
 	tristate "Samsung S3C24XX series SPI"
-	depends on ARCH_S3C2410 && EXPERIMENTAL
+	depends on ARCH_S3C24XX && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  SPI driver for Samsung S3C24XX series ARM SoCs
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 75823a1..5bf2913 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -37,7 +37,7 @@ config USB_ARCH_HAS_OHCI
 	# ARM:
 	default y if SA1111
 	default y if ARCH_OMAP
-	default y if ARCH_S3C2410
+	default y if ARCH_S3C24XX
 	default y if PXA27x
 	default y if PXA3xx
 	default y if ARCH_EP93XX
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7ecb68a..43a11c1 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -284,7 +284,7 @@ config USB_IMX
 
 config USB_S3C2410
 	tristate "S3C2410 USB Device Controller"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	help
 	  Samsung's S3C2410 is an ARM-4 processor with an integrated
 	  full speed USB 1.1 device controller.  It has 4 configurable
@@ -299,7 +299,7 @@ config USB_S3C2410_DEBUG
 
 config USB_S3C_HSUDC
 	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select USB_GADGET_DUALSPEED
 	help
 	  Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 34b9edd..f15e08f 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1000,7 +1000,7 @@ MODULE_LICENSE ("GPL");
 #define SA1111_DRIVER		ohci_hcd_sa1111_driver
 #endif
 
-#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
 #include "ohci-s3c2410.c"
 #define PLATFORM_DRIVER		ohci_hcd_s3c2410_driver
 #endif
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6ca0c40..64ad8cc 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2061,7 +2061,7 @@ config FB_S3C_DEBUG_REGWRITE
 
 config FB_S3C2410
 	tristate "S3C2410 LCD framebuffer support"
-	depends on FB && ARCH_S3C2410
+	depends on FB && ARCH_S3C24XX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 877b107..3aa52ba 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -170,7 +170,7 @@ config HAVE_S3C2410_WATCHDOG
 
 config S3C2410_WATCHDOG
 	tristate "S3C2410 Watchdog"
-	depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG
+	depends on HAVE_S3C2410_WATCHDOG
 	select WATCHDOG_CORE
 	help
 	  Watchdog timer block in the Samsung SoCs. This will reboot
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index f3417f2..fe3995c 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,8 +1,8 @@
 config SND_SOC_SAMSUNG
 	tristate "ASoC support for Samsung"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4
+	depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4
 	select S3C64XX_DMA if ARCH_S3C64XX
-	select S3C2410_DMA if ARCH_S3C2410
+	select S3C2410_DMA if ARCH_S3C24XX
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the Samsung SoCs' Audio interfaces. You will also need to
@@ -84,7 +84,7 @@ config SND_SOC_SAMSUNG_SMDK2443_WM9710
 
 config SND_SOC_SAMSUNG_LN2440SBC_ALC650
 	tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C2410
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
 	select S3C2410_DMA
 	select AC97_BUS
 	select SND_SOC_AC97_CODEC
@@ -95,7 +95,7 @@ config SND_SOC_SAMSUNG_LN2440SBC_ALC650
 
 config SND_SOC_SAMSUNG_S3C24XX_UDA134X
 	tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C2410
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
 	select SND_S3C24XX_I2S
 	select SND_SOC_L3
 	select SND_SOC_UDA134X
@@ -107,14 +107,14 @@ config SND_SOC_SAMSUNG_SIMTEC
 
 config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
 	tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C2410
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
 	select SND_S3C24XX_I2S
 	select SND_SOC_TLV320AIC23
 	select SND_SOC_SAMSUNG_SIMTEC
 
 config SND_SOC_SAMSUNG_SIMTEC_HERMES
 	tristate "SoC I2S Audio support for Simtec Hermes board"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C2410
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
 	select SND_S3C24XX_I2S
 	select SND_SOC_TLV320AIC3X
 	select SND_SOC_SAMSUNG_SIMTEC
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
  2012-02-15 22:55 ` [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX Kukjin Kim
@ 2012-02-16  9:21   ` Felipe Balbi
  2012-02-19 22:53   ` Florian Tobias Schandinat
  1 sibling, 0 replies; 22+ messages in thread
From: Felipe Balbi @ 2012-02-16  9:21 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

On Thu, Feb 16, 2012 at 07:55:40AM +0900, Kukjin Kim wrote:
> This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung
> S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443,
> and S3C2450 SoCs so that we can merge the mach-xxx directories
> and plat-s3c24xx dir. to just one mach-s3c24xx for them.
> 
> I think this should be sent to upstream via samsung tree because
> this touches many samsung stuff.
> 
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: Richard Purdie <rpurdie@rpsys.net>
> Cc: Chris Ball <cjb@laptop.org>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Greg Kroah-Hartman <gregkh@suse.de>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
> Cc: Wim Van Sebroeck <wim@iguana.be>
> Cc: Sangbeom Kim <sbkim73@samsung.com>
> Cc: Liam Girdwood <lrg@ti.com>
> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: Russell King <rmk+kernel@arm.linux.org.uk>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
>  arch/arm/Kconfig                      |   23 +++++++++++------------
>  arch/arm/Makefile                     |    2 +-
>  arch/arm/boot/compressed/head.S       |    2 +-
>  arch/arm/configs/mini2440_defconfig   |    2 +-
>  arch/arm/configs/s3c2410_defconfig    |    2 +-
>  arch/arm/configs/tct_hammer_defconfig |    2 +-
>  arch/arm/mach-s3c2410/Kconfig         |    2 +-
>  arch/arm/mach-s3c2412/Kconfig         |    4 ++--
>  arch/arm/mach-s3c2416/Kconfig         |    2 +-
>  arch/arm/mach-s3c2443/Kconfig         |    2 +-
>  arch/arm/plat-s3c24xx/Kconfig         |    6 +++---
>  arch/arm/plat-s3c24xx/Makefile        |    2 +-
>  arch/arm/plat-samsung/Kconfig         |    4 ++--
>  drivers/input/touchscreen/Kconfig     |    2 +-
>  drivers/leds/Kconfig                  |    2 +-
>  drivers/mmc/host/Kconfig              |    2 +-
>  drivers/mtd/nand/Kconfig              |    2 +-
>  drivers/rtc/Kconfig                   |    2 +-
>  drivers/spi/Kconfig                   |    2 +-
>  drivers/usb/Kconfig                   |    2 +-
>  drivers/usb/gadget/Kconfig            |    4 ++--

for the gadget part:

Acked-by: Felipe Balbi <balbi@ti.com>

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120216/49e15eeb/attachment-0001.sig>

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
  2012-02-15 22:55 ` [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX Kukjin Kim
  2012-02-16  9:21   ` Felipe Balbi
@ 2012-02-19 22:53   ` Florian Tobias Schandinat
  1 sibling, 0 replies; 22+ messages in thread
From: Florian Tobias Schandinat @ 2012-02-19 22:53 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

On 02/15/2012 10:55 PM, Kukjin Kim wrote:
> This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung
> S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443,
> and S3C2450 SoCs so that we can merge the mach-xxx directories
> and plat-s3c24xx dir. to just one mach-s3c24xx for them.

Great.

> I think this should be sent to upstream via samsung tree because
> this touches many samsung stuff.

Okay, feel free to do so.

> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: Richard Purdie <rpurdie@rpsys.net>
> Cc: Chris Ball <cjb@laptop.org>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Alessandro Zummo <a.zummo@towertech.it>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Greg Kroah-Hartman <gregkh@suse.de>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

for the framebuffer (video) part:
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

> Cc: Wim Van Sebroeck <wim@iguana.be>
> Cc: Sangbeom Kim <sbkim73@samsung.com>
> Cc: Liam Girdwood <lrg@ti.com>
> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: Russell King <rmk+kernel@arm.linux.org.uk>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---

Best regards,

Florian Tobias Schandinat

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 07/12] ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
                   ` (5 preceding siblings ...)
  2012-02-15 22:55 ` [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-15 22:55 ` [PATCH 08/12] ARM: S3C2412: move mach-s3c2412/* into mach/s3c24xx/ Kukjin Kim
                   ` (4 subsequent siblings)
  11 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

This patch moves S3C2410 stuff into mach-s3c24xx/ directory
so that we can merge the s3c24 series' directories to the
just one mach-s3c24xx/ directory.

And this patch is including following.
- re-ordered alphabetically by option text at Kconfig and Makefile
- removed unused option, MACH_N35
- fixed duplcated option name, S3C2410_DMA to S3C24XX_DMA which is
  in plat-s3c24xx/

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/Kconfig                                   |    2 +-
 arch/arm/Makefile                                  |    2 +-
 arch/arm/mach-s3c2410/Kconfig                      |  154 ------------------
 arch/arm/mach-s3c2410/Makefile                     |   26 ---
 arch/arm/mach-s3c24xx/Kconfig                      |  165 ++++++++++++++++++++
 arch/arm/mach-s3c24xx/Makefile                     |   45 ++++++
 .../{mach-s3c2410 => mach-s3c24xx}/Makefile.boot   |    0
 arch/arm/{mach-s3c2410 => mach-s3c24xx}/bast-ide.c |    0
 arch/arm/{mach-s3c2410 => mach-s3c24xx}/bast-irq.c |    0
 arch/arm/{mach-s3c2410 => mach-s3c24xx}/common.h   |    0
 .../dma.c => mach-s3c24xx/dma-s3c2410.c}           |    0
 .../h1940-bluetooth.c                              |    0
 .../include/mach/anubis-cpld.h                     |    0
 .../include/mach/anubis-irq.h                      |    0
 .../include/mach/anubis-map.h                      |    0
 .../include/mach/bast-cpld.h                       |    0
 .../include/mach/bast-irq.h                        |    0
 .../include/mach/bast-map.h                        |    0
 .../include/mach/bast-pmu.h                        |    0
 .../include/mach/debug-macro.S                     |    0
 .../include/mach/dma.h                             |    0
 .../include/mach/entry-macro.S                     |    0
 .../include/mach/fb.h                              |    0
 .../include/mach/gpio-fns.h                        |    0
 .../include/mach/gpio-nrs.h                        |    0
 .../include/mach/gpio-track.h                      |    0
 .../include/mach/gpio.h                            |    0
 .../include/mach/h1940-latch.h                     |    0
 .../include/mach/h1940.h                           |    0
 .../include/mach/hardware.h                        |    0
 .../include/mach/idle.h                            |    0
 .../include/mach/io.h                              |    0
 .../include/mach/irqs.h                            |    0
 .../include/mach/leds-gpio.h                       |    0
 .../include/mach/map.h                             |    0
 .../include/mach/osiris-cpld.h                     |    0
 .../include/mach/osiris-map.h                      |    0
 .../include/mach/otom-map.h                        |    0
 .../include/mach/pm-core.h                         |    0
 .../include/mach/regs-clock.h                      |    0
 .../include/mach/regs-dsc.h                        |    0
 .../include/mach/regs-gpio.h                       |    0
 .../include/mach/regs-gpioj.h                      |    0
 .../include/mach/regs-irq.h                        |    0
 .../include/mach/regs-lcd.h                        |    0
 .../include/mach/regs-mem.h                        |    0
 .../include/mach/regs-power.h                      |    0
 .../include/mach/regs-s3c2412-mem.h                |    0
 .../include/mach/regs-s3c2412.h                    |    0
 .../include/mach/regs-s3c2416-mem.h                |    0
 .../include/mach/regs-s3c2416.h                    |    0
 .../include/mach/regs-s3c2443-clock.h              |    0
 .../include/mach/regs-sdi.h                        |    0
 .../include/mach/system.h                          |    0
 .../include/mach/tick.h                            |    0
 .../include/mach/timex.h                           |    0
 .../include/mach/uncompress.h                      |    0
 .../include/mach/vr1000-cpld.h                     |    0
 .../include/mach/vr1000-irq.h                      |    0
 .../include/mach/vr1000-map.h                      |    0
 .../{mach-s3c2410 => mach-s3c24xx}/mach-amlm5900.c |    0
 .../arm/{mach-s3c2410 => mach-s3c24xx}/mach-bast.c |    0
 .../{mach-s3c2410 => mach-s3c24xx}/mach-h1940.c    |    0
 arch/arm/{mach-s3c2410 => mach-s3c24xx}/mach-n30.c |    0
 .../arm/{mach-s3c2410 => mach-s3c24xx}/mach-otom.c |    0
 .../{mach-s3c2410 => mach-s3c24xx}/mach-qt2410.c   |    0
 .../{mach-s3c2410 => mach-s3c24xx}/mach-smdk2410.c |    0
 .../mach-tct_hammer.c                              |    0
 .../{mach-s3c2410 => mach-s3c24xx}/mach-vr1000.c   |    0
 .../{mach-s3c2410 => mach-s3c24xx}/nor-simtec.c    |    0
 .../{mach-s3c2410 => mach-s3c24xx}/nor-simtec.h    |    0
 arch/arm/{mach-s3c2410 => mach-s3c24xx}/pm-h1940.S |    0
 .../pm.c => mach-s3c24xx/pm-s3c2410.c}             |    0
 arch/arm/{mach-s3c2410 => mach-s3c24xx}/s3c2410.c  |    0
 .../sleep.S => mach-s3c24xx/sleep-s3c2410.S}       |    0
 .../{mach-s3c2410 => mach-s3c24xx}/usb-simtec.c    |    0
 .../{mach-s3c2410 => mach-s3c24xx}/usb-simtec.h    |    0
 arch/arm/plat-s3c24xx/Kconfig                      |    2 +-
 arch/arm/plat-s3c24xx/Makefile                     |    2 +-
 79 files changed, 214 insertions(+), 184 deletions(-)
 create mode 100644 arch/arm/mach-s3c24xx/Kconfig
 create mode 100644 arch/arm/mach-s3c24xx/Makefile
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/Makefile.boot (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/bast-ide.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/bast-irq.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/common.h (100%)
 rename arch/arm/{mach-s3c2410/dma.c => mach-s3c24xx/dma-s3c2410.c} (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/h1940-bluetooth.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/anubis-cpld.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/anubis-irq.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/anubis-map.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/bast-cpld.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/bast-irq.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/bast-map.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/bast-pmu.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/debug-macro.S (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/dma.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/entry-macro.S (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/fb.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/gpio-fns.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/gpio-nrs.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/gpio-track.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/gpio.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/h1940-latch.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/h1940.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/hardware.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/idle.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/io.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/irqs.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/leds-gpio.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/map.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/osiris-cpld.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/osiris-map.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/otom-map.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/pm-core.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-clock.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-dsc.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-gpio.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-gpioj.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-irq.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-lcd.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-mem.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-power.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-s3c2412-mem.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-s3c2412.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-s3c2416-mem.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-s3c2416.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-s3c2443-clock.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/regs-sdi.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/system.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/tick.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/timex.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/uncompress.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/vr1000-cpld.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/vr1000-irq.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/include/mach/vr1000-map.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/mach-amlm5900.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/mach-bast.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/mach-h1940.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/mach-n30.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/mach-otom.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/mach-qt2410.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/mach-smdk2410.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/mach-tct_hammer.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/mach-vr1000.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/nor-simtec.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/nor-simtec.h (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/pm-h1940.S (100%)
 rename arch/arm/{mach-s3c2410/pm.c => mach-s3c24xx/pm-s3c2410.c} (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/s3c2410.c (100%)
 rename arch/arm/{mach-s3c2410/sleep.S => mach-s3c24xx/sleep-s3c2410.S} (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/usb-simtec.c (100%)
 rename arch/arm/{mach-s3c2410 => mach-s3c24xx}/usb-simtec.h (100%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5f1a3ad..f8044e9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1067,8 +1067,8 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
+source "arch/arm/mach-s3c24xx/Kconfig"
 if ARCH_S3C24XX
-source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
 source "arch/arm/mach-s3c2416/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 624f764..59d9df4 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -175,7 +175,7 @@ machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		:= s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
+machine-$(CONFIG_ARCH_S3C24XX)		:= s3c24xx s3c2412 s3c2416 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index ce62099..68d89cb 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -2,42 +2,6 @@
 #
 # Licensed under GPLv2
 
-config CPU_S3C2410
-	bool
-	depends on ARCH_S3C24XX
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select CPU_LLSERIAL_S3C2410
-	select S3C2410_PM if PM
-	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
-	help
-	  Support for S3C2410 and S3C2410A family from the S3C24XX line
-	  of Samsung Mobile CPUs.
-
-config CPU_S3C2410_DMA
-	bool
-	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
-	help
-	  DMA device selection for S3C2410 and compatible CPUs
-
-config S3C2410_PM
-	bool
-	help
-	  Power Management code common to S3C2410 and better
-
-config SIMTEC_NOR
-	bool
-	help
-	  Internal node to specify machine has simtec NOR mapping
-
-config MACH_BAST_IDE
-	bool
-	select HAVE_PATA_PLATFORM
-	help
-	  Internal node for machines with an BAST style IDE
-	  interface
-
 # cpu frequency scaling support
 
 config S3C2410_CPUFREQ
@@ -54,121 +18,3 @@ config S3C2410_PLLTABLE
 	help
 	  Select the PLL table for the S3C2410
 
-menu "S3C2410 Machines"
-
-config ARCH_SMDK2410
-	bool "SMDK2410/A9M2410"
-	select CPU_S3C2410
-	select MACH_SMDK
-	help
-	   Say Y here if you are using the SMDK2410 or the derived module A9M2410
-           <http://www.fsforth.de>
-
-config ARCH_H1940
-	bool "IPAQ H1940"
-	select CPU_S3C2410
-	select PM_H1940 if PM
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	select S3C2410_SETUP_TS
-	help
-	  Say Y here if you are using the HP IPAQ H1940
-
-config H1940BT
-        tristate "Control the state of H1940 bluetooth chip"
-        depends on ARCH_H1940
-        select RFKILL
-        help
-          This is a simple driver that is able to control
-          the state of built in bluetooth chip on h1940.
-
-config PM_H1940
-	bool
-	help
-	  Internal node for H1940 and related PM
-
-config MACH_N30
-	bool "Acer N30 family"
-	select CPU_S3C2410
-	select MACH_N35
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you want suppt for the Acer N30, Acer N35,
-	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
-
-config MACH_N35
-	bool
-	help
-	  Internal node in order to enable support for Acer N35 if Acer N30 is
-	  selected.
-
-config ARCH_BAST
-	bool "Simtec Electronics BAST (EB2410ITX)"
-	select CPU_S3C2410
-	select S3C2410_IOTIMING if S3C2410_CPUFREQ
-	select PM_SIMTEC if PM
-	select SIMTEC_NOR
-	select MACH_BAST_IDE
-	select S3C24XX_DCLK
-	select ISA
-	select S3C_DEV_HWMON
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Simtec Electronics EB2410ITX
-	  development board (also known as BAST)
-
-config MACH_OTOM
- 	bool "NexVision OTOM Board"
- 	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
- 	  Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_AML_M5900
-	bool "AML M5900 Series"
-	select CPU_S3C2410
-	select PM_SIMTEC if PM
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the American Microsystems M5900 Series
-           <http://www.amltd.com>
-
-config BAST_PC104_IRQ
-	bool "BAST PC104 IRQ support"
-	depends on ARCH_BAST
-	default y
-	help
-	  Say Y	here to enable the PC104 IRQ routing on the
-	  Simtec BAST (EB2410ITX)
-
-config MACH_TCT_HAMMER
-	bool "TCT Hammer Board"
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the TinCanTools Hammer Board
-           <http://www.tincantools.com>
-
-config MACH_VR1000
-	bool "Thorcom VR1000"
-	select PM_SIMTEC if PM
-	select S3C24XX_DCLK
-	select SIMTEC_NOR
-	select MACH_BAST_IDE
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Thorcom VR1000 board.
-
-config MACH_QT2410
-	bool "QT2410"
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	   Say Y here if you are using the Armzone QT2410
-
-endmenu
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 782fd81..6b9a316 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -9,32 +9,6 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
-obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
-obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
 obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 
-# Machine support
-
-obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
-obj-$(CONFIG_H1940BT)		+= h1940-bluetooth.o
-obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
-obj-$(CONFIG_MACH_N30)		+= mach-n30.o
-obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
-obj-$(CONFIG_MACH_OTOM)		+= mach-otom.o
-obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
-obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
-obj-$(CONFIG_MACH_TCT_HAMMER)	+= mach-tct_hammer.o
-obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
-obj-$(CONFIG_MACH_QT2410)	+= mach-qt2410.o
-
-# Common bits of machine support
-
-obj-$(CONFIG_SIMTEC_NOR)	+= nor-simtec.o
-
-# machine additions
-
-obj-$(CONFIG_MACH_BAST_IDE)	+= bast-ide.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
new file mode 100644
index 0000000..7f916c8
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -0,0 +1,165 @@
+# arch/arm/mach-s3c24xx/Kconfig
+#
+# Copyright (c) 2012 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+if ARCH_S3C24XX
+
+menu "SAMSUNG S3C24XX SoCs Support"
+
+comment "S3C24XX SoCs"
+
+config CPU_S3C2410
+	bool "SAMSUNG S3C2410"
+	default y
+	select CPU_ARM920T
+	select S3C2410_CLOCK
+	select CPU_LLSERIAL_S3C2410
+	select S3C2410_PM if PM
+	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+	help
+	  Support for S3C2410 and S3C2410A family from the S3C24XX line
+	  of Samsung Mobile CPUs.
+
+if CPU_S3C2410
+
+config S3C2410_DMA
+	bool
+	depends on S3C2410_DMA && CPU_S3C2410
+	default y if CPU_S3C2410
+	help
+	  DMA device selection for S3C2410 and compatible CPUs
+
+config S3C2410_PM
+	bool
+	help
+	  Power Management code common to S3C2410 and better
+
+config SIMTEC_NOR
+	bool
+	help
+	  Internal node to specify machine has simtec NOR mapping
+
+config MACH_BAST_IDE
+	bool
+	select HAVE_PATA_PLATFORM
+	help
+	  Internal node for machines with an BAST style IDE
+	  interface
+
+comment "S3C2410 Boards"
+
+#
+# The "S3C2410 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_AML_M5900
+	bool "AML M5900 Series"
+	select PM_SIMTEC if PM
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the American Microsystems M5900 Series
+	  <http://www.amltd.com>
+
+config ARCH_BAST
+	bool "Simtec Electronics BAST (EB2410ITX)"
+	select S3C2410_IOTIMING if S3C2410_CPUFREQ
+	select PM_SIMTEC if PM
+	select SIMTEC_NOR
+	select MACH_BAST_IDE
+	select S3C24XX_DCLK
+	select ISA
+	select S3C_DEV_HWMON
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Simtec Electronics EB2410ITX
+	  development board (also known as BAST)
+
+config BAST_PC104_IRQ
+	bool "BAST PC104 IRQ support"
+	depends on ARCH_BAST
+	default y
+	help
+	  Say Y	here to enable the PC104 IRQ routing on the
+	  Simtec BAST (EB2410ITX)
+
+config ARCH_H1940
+	bool "IPAQ H1940"
+	select PM_H1940 if PM
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	select S3C2410_SETUP_TS
+	help
+	  Say Y here if you are using the HP IPAQ H1940
+
+config H1940BT
+	tristate "Control the state of H1940 bluetooth chip"
+	depends on ARCH_H1940
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on h1940.
+
+config PM_H1940
+	bool
+	help
+	  Internal node for H1940 and related PM
+
+config MACH_N30
+	bool "Acer N30 family"
+	select MACH_N35
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you want suppt for the Acer N30, Acer N35,
+	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
+
+config MACH_OTOM
+	bool "NexVision OTOM Board"
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Nex Vision OTOM board
+
+config MACH_QT2410
+	bool "QT2410"
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Armzone QT2410
+
+config ARCH_SMDK2410
+	bool "SMDK2410/A9M2410"
+	select MACH_SMDK
+	help
+	  Say Y here if you are using the SMDK2410 or the derived module A9M2410
+	  <http://www.fsforth.de>
+
+config MACH_TCT_HAMMER
+	bool "TCT Hammer Board"
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the TinCanTools Hammer Board
+	  <http://www.tincantools.com>
+
+config MACH_VR1000
+	bool "Thorcom VR1000"
+	select PM_SIMTEC if PM
+	select S3C24XX_DCLK
+	select SIMTEC_NOR
+	select MACH_BAST_IDE
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Thorcom VR1000 board.
+
+endif	# CPU_S3C2410
+
+endmenu	# SAMSUNG S3C24XX SoCs Support
+
+endif	# ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
new file mode 100644
index 0000000..b6afbf84
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -0,0 +1,45 @@
+# arch/arm/mach-s3c24xx/Makefile
+#
+# Copyright (c) 2012 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# core
+
+obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
+obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
+
+#
+# machine support
+# following is ordered alphabetically by option text.
+#
+
+obj-$(CONFIG_MACH_AML_M5900)		+= mach-amlm5900.o
+obj-$(CONFIG_ARCH_BAST)			+= mach-bast.o usb-simtec.o
+obj-$(CONFIG_BAST_PC104_IRQ)		+= bast-irq.o
+obj-$(CONFIG_ARCH_H1940)		+= mach-h1940.o
+obj-$(CONFIG_H1940BT)			+= h1940-bluetooth.o
+obj-$(CONFIG_PM_H1940)			+= pm-h1940.o
+obj-$(CONFIG_MACH_N30)			+= mach-n30.o
+obj-$(CONFIG_MACH_OTOM)			+= mach-otom.o
+obj-$(CONFIG_MACH_QT2410)		+= mach-qt2410.o
+obj-$(CONFIG_ARCH_SMDK2410)		+= mach-smdk2410.o
+obj-$(CONFIG_MACH_TCT_HAMMER)		+= mach-tct_hammer.o
+obj-$(CONFIG_MACH_VR1000)		+= mach-vr1000.o usb-simtec.o
+
+# common bits of machine support
+
+obj-$(CONFIG_SIMTEC_NOR)		+= nor-simtec.o
+
+# machine additions
+
+obj-$(CONFIG_MACH_BAST_IDE)		+= bast-ide.o
diff --git a/arch/arm/mach-s3c2410/Makefile.boot b/arch/arm/mach-s3c24xx/Makefile.boot
similarity index 100%
rename from arch/arm/mach-s3c2410/Makefile.boot
rename to arch/arm/mach-s3c24xx/Makefile.boot
diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c
similarity index 100%
rename from arch/arm/mach-s3c2410/bast-ide.c
rename to arch/arm/mach-s3c24xx/bast-ide.c
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c
similarity index 100%
rename from arch/arm/mach-s3c2410/bast-irq.c
rename to arch/arm/mach-s3c24xx/bast-irq.c
diff --git a/arch/arm/mach-s3c2410/common.h b/arch/arm/mach-s3c24xx/common.h
similarity index 100%
rename from arch/arm/mach-s3c2410/common.h
rename to arch/arm/mach-s3c24xx/common.h
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
similarity index 100%
rename from arch/arm/mach-s3c2410/dma.c
rename to arch/arm/mach-s3c24xx/dma-s3c2410.c
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
similarity index 100%
rename from arch/arm/mach-s3c2410/h1940-bluetooth.c
rename to arch/arm/mach-s3c24xx/h1940-bluetooth.c
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
rename to arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/anubis-irq.h
rename to arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-map.h b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/anubis-map.h
rename to arch/arm/mach-s3c24xx/include/mach/anubis-map.h
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/bast-cpld.h
rename to arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/bast-irq.h
rename to arch/arm/mach-s3c24xx/include/mach/bast-irq.h
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/bast-map.h
rename to arch/arm/mach-s3c24xx/include/mach/bast-map.h
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/bast-pmu.h
rename to arch/arm/mach-s3c24xx/include/mach/bast-pmu.h
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/debug-macro.S
rename to arch/arm/mach-s3c24xx/include/mach/debug-macro.S
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/dma.h
rename to arch/arm/mach-s3c24xx/include/mach/dma.h
diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/entry-macro.S
rename to arch/arm/mach-s3c24xx/include/mach/entry-macro.S
diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c24xx/include/mach/fb.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/fb.h
rename to arch/arm/mach-s3c24xx/include/mach/fb.h
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/gpio-fns.h
rename to arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
rename to arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/gpio-track.h
rename to arch/arm/mach-s3c24xx/include/mach/gpio-track.h
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c24xx/include/mach/gpio.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/gpio.h
rename to arch/arm/mach-s3c24xx/include/mach/gpio.h
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/h1940-latch.h
rename to arch/arm/mach-s3c24xx/include/mach/h1940-latch.h
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c24xx/include/mach/h1940.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/h1940.h
rename to arch/arm/mach-s3c24xx/include/mach/h1940.h
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/hardware.h
rename to arch/arm/mach-s3c24xx/include/mach/hardware.h
diff --git a/arch/arm/mach-s3c2410/include/mach/idle.h b/arch/arm/mach-s3c24xx/include/mach/idle.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/idle.h
rename to arch/arm/mach-s3c24xx/include/mach/idle.h
diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/io.h
rename to arch/arm/mach-s3c24xx/include/mach/io.h
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/irqs.h
rename to arch/arm/mach-s3c24xx/include/mach/irqs.h
diff --git a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h b/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/leds-gpio.h
rename to arch/arm/mach-s3c24xx/include/mach/leds-gpio.h
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/map.h
rename to arch/arm/mach-s3c24xx/include/mach/map.h
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
rename to arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c24xx/include/mach/osiris-map.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/osiris-map.h
rename to arch/arm/mach-s3c24xx/include/mach/osiris-map.h
diff --git a/arch/arm/mach-s3c2410/include/mach/otom-map.h b/arch/arm/mach-s3c24xx/include/mach/otom-map.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/otom-map.h
rename to arch/arm/mach-s3c24xx/include/mach/otom-map.h
diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/pm-core.h
rename to arch/arm/mach-s3c24xx/include/mach/pm-core.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-clock.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-clock.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-dsc.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-dsc.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-gpio.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c24xx/include/mach/regs-irq.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-irq.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-irq.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-lcd.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-mem.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-mem.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c24xx/include/mach/regs-power.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-power.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-power.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/regs-sdi.h
rename to arch/arm/mach-s3c24xx/include/mach/regs-sdi.h
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c24xx/include/mach/system.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/system.h
rename to arch/arm/mach-s3c24xx/include/mach/system.h
diff --git a/arch/arm/mach-s3c2410/include/mach/tick.h b/arch/arm/mach-s3c24xx/include/mach/tick.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/tick.h
rename to arch/arm/mach-s3c24xx/include/mach/tick.h
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/timex.h
rename to arch/arm/mach-s3c24xx/include/mach/timex.h
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c24xx/include/mach/uncompress.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/uncompress.h
rename to arch/arm/mach-s3c24xx/include/mach/uncompress.h
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
rename to arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
rename to arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
similarity index 100%
rename from arch/arm/mach-s3c2410/include/mach/vr1000-map.h
rename to arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
similarity index 100%
rename from arch/arm/mach-s3c2410/mach-amlm5900.c
rename to arch/arm/mach-s3c24xx/mach-amlm5900.c
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
similarity index 100%
rename from arch/arm/mach-s3c2410/mach-bast.c
rename to arch/arm/mach-s3c24xx/mach-bast.c
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
similarity index 100%
rename from arch/arm/mach-s3c2410/mach-h1940.c
rename to arch/arm/mach-s3c24xx/mach-h1940.c
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
similarity index 100%
rename from arch/arm/mach-s3c2410/mach-n30.c
rename to arch/arm/mach-s3c24xx/mach-n30.c
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
similarity index 100%
rename from arch/arm/mach-s3c2410/mach-otom.c
rename to arch/arm/mach-s3c24xx/mach-otom.c
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
similarity index 100%
rename from arch/arm/mach-s3c2410/mach-qt2410.c
rename to arch/arm/mach-s3c24xx/mach-qt2410.c
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
similarity index 100%
rename from arch/arm/mach-s3c2410/mach-smdk2410.c
rename to arch/arm/mach-s3c24xx/mach-smdk2410.c
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
similarity index 100%
rename from arch/arm/mach-s3c2410/mach-tct_hammer.c
rename to arch/arm/mach-s3c24xx/mach-tct_hammer.c
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
similarity index 100%
rename from arch/arm/mach-s3c2410/mach-vr1000.c
rename to arch/arm/mach-s3c24xx/mach-vr1000.c
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c24xx/nor-simtec.c
similarity index 100%
rename from arch/arm/mach-s3c2410/nor-simtec.c
rename to arch/arm/mach-s3c24xx/nor-simtec.c
diff --git a/arch/arm/mach-s3c2410/nor-simtec.h b/arch/arm/mach-s3c24xx/nor-simtec.h
similarity index 100%
rename from arch/arm/mach-s3c2410/nor-simtec.h
rename to arch/arm/mach-s3c24xx/nor-simtec.h
diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c24xx/pm-h1940.S
similarity index 100%
rename from arch/arm/mach-s3c2410/pm-h1940.S
rename to arch/arm/mach-s3c24xx/pm-h1940.S
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c
similarity index 100%
rename from arch/arm/mach-s3c2410/pm.c
rename to arch/arm/mach-s3c24xx/pm-s3c2410.c
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
similarity index 100%
rename from arch/arm/mach-s3c2410/s3c2410.c
rename to arch/arm/mach-s3c24xx/s3c2410.c
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
similarity index 100%
rename from arch/arm/mach-s3c2410/sleep.S
rename to arch/arm/mach-s3c24xx/sleep-s3c2410.S
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c24xx/usb-simtec.c
similarity index 100%
rename from arch/arm/mach-s3c2410/usb-simtec.c
rename to arch/arm/mach-s3c24xx/usb-simtec.c
diff --git a/arch/arm/mach-s3c2410/usb-simtec.h b/arch/arm/mach-s3c24xx/usb-simtec.h
similarity index 100%
rename from arch/arm/mach-s3c2410/usb-simtec.h
rename to arch/arm/mach-s3c24xx/usb-simtec.h
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5a67eda..0c183fd 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -82,7 +82,7 @@ config PM_SIMTEC
 	  Common power management code for systems that are
 	  compatible with the Simtec style of power management
 
-config S3C2410_DMA
+config S3C24XX_DMA
 	bool "S3C2410 DMA support"
 	depends on ARCH_S3C24XX
 	select S3C_DMA
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 32bd295..bce27ca 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2443_CLOCK)	+= s3c2443-clock.o
-obj-$(CONFIG_S3C2410_DMA)	+= dma.o
+obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 08/12] ARM: S3C2412: move mach-s3c2412/* into mach/s3c24xx/
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
                   ` (6 preceding siblings ...)
  2012-02-15 22:55 ` [PATCH 07/12] ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/ Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-28 21:34   ` [PATCH] Move S3C2412_PM_SLEEP to common platform code Heiko Stübner
  2012-02-15 22:55 ` [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/ Kukjin Kim
                   ` (3 subsequent siblings)
  11 siblings, 1 reply; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

This patch moves S3C2412 stuff into mach-s3c24xx/ directory
so that we can merge the s3c24 series' directories to the
just one mach-s3c24xx/ directory.

And this patch is including following.
- re-ordered alphabetically by option text at Kconfig and Makefile

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2412/Kconfig                      |   85 -------------------
 arch/arm/mach-s3c2412/Makefile                     |   12 ---
 arch/arm/mach-s3c24xx/Kconfig                      |   89 +++++++++++++++++++-
 arch/arm/mach-s3c24xx/Makefile                     |    9 ++
 .../clock.c => mach-s3c24xx/clock-s3c2412.c}       |    0
 .../dma.c => mach-s3c24xx/dma-s3c2412.c}           |    0
 .../irq.c => mach-s3c24xx/irq-s3c2412.c}           |    0
 .../arm/{mach-s3c2412 => mach-s3c24xx}/mach-jive.c |    0
 .../{mach-s3c2412 => mach-s3c24xx}/mach-smdk2413.c |    0
 .../{mach-s3c2412 => mach-s3c24xx}/mach-vstms.c    |    0
 .../pm.c => mach-s3c24xx/pm-s3c2412.c}             |    0
 arch/arm/{mach-s3c2412 => mach-s3c24xx}/s3c2412.c  |    0
 .../sleep.S => mach-s3c24xx/sleep-s3c2412.S}       |    0
 13 files changed, 97 insertions(+), 98 deletions(-)
 rename arch/arm/{mach-s3c2412/clock.c => mach-s3c24xx/clock-s3c2412.c} (100%)
 rename arch/arm/{mach-s3c2412/dma.c => mach-s3c24xx/dma-s3c2412.c} (100%)
 rename arch/arm/{mach-s3c2412/irq.c => mach-s3c24xx/irq-s3c2412.c} (100%)
 rename arch/arm/{mach-s3c2412 => mach-s3c24xx}/mach-jive.c (100%)
 rename arch/arm/{mach-s3c2412 => mach-s3c24xx}/mach-smdk2413.c (100%)
 rename arch/arm/{mach-s3c2412 => mach-s3c24xx}/mach-vstms.c (100%)
 rename arch/arm/{mach-s3c2412/pm.c => mach-s3c24xx/pm-s3c2412.c} (100%)
 rename arch/arm/{mach-s3c2412 => mach-s3c24xx}/s3c2412.c (100%)
 rename arch/arm/{mach-s3c2412/sleep.S => mach-s3c24xx/sleep-s3c2412.S} (100%)

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 41f3327..c5256f4 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -2,41 +2,6 @@
 #
 # Licensed under GPLv2
 
-config CPU_S3C2412
-	bool
-	depends on ARCH_S3C24XX
-	select CPU_ARM926T
-	select CPU_LLSERIAL_S3C2440
-	select S3C2412_PM if PM
-	select S3C2412_DMA if S3C2410_DMA
-	help
-	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C2412_ONLY
-	bool
-	depends on ARCH_S3C24XX && !CPU_S3C2410 && \
-		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
-		   !CPU_S3C2443 && CPU_S3C2412
-	default y if CPU_S3C2412
-
-config S3C2412_DMA
-	bool
-	depends on CPU_S3C2412
-	help
-	  Internal config node for S3C2412 DMA support
-
-config S3C2412_PM
-	bool
-	select S3C2412_PM_SLEEP
-	help
-	  Internal config node to apply S3C2412 power management
-
-config S3C2412_PM_SLEEP
-	bool
-	help
-	  Internal config node to apply sleep for S3C2412 power management.
-	  Can be selected by another SoCs with similar sleep procedure.
-
 # Note, the S3C2412 IOtiming support is in plat-s3c24xx
 
 config S3C2412_CPUFREQ
@@ -46,53 +11,3 @@ config S3C2412_CPUFREQ
 	default y
 	help
 	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
-menu "S3C2412 Machines"
-
-config MACH_JIVE
-	bool "Logitech Jive"
-	select CPU_S3C2412
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Logitech Jive.
-
-config MACH_JIVE_SHOW_BOOTLOADER
-	bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
-	depends on MACH_JIVE && EXPERIMENTAL
-
-config MACH_SMDK2413
-	bool "SMDK2413"
-	select CPU_S3C2412
-	select MACH_S3C2413
-	select MACH_SMDK
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using an SMDK2413
-
-config MACH_S3C2413
-	bool
-	help
-	  Internal node for S3C2413 version of SMDK2413, so that
-	  machine_is_s3c2413() will work when MACH_SMDK2413 is
-	  selected
-
-config MACH_SMDK2412
-	bool "SMDK2412"
-	select MACH_SMDK2413
-	help
-	  Say Y here if you are using an SMDK2412
-
-	  Note, this shares support with SMDK2413, so will automatically
-	  select MACH_SMDK2413.
-
-config MACH_VSTMS
-	bool "VMSTMS"
-	select CPU_S3C2412
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using an VSTMS board
-
-endmenu
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 7e4d95f..41a6c27 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -9,16 +9,4 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
-obj-$(CONFIG_CPU_S3C2412)	+= irq.o
-obj-$(CONFIG_CPU_S3C2412)	+= clock.o
-obj-$(CONFIG_S3C2412_DMA)	+= dma.o
-obj-$(CONFIG_S3C2412_PM)	+= pm.o
-obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep.o
 obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_JIVE)		+= mach-jive.o
-obj-$(CONFIG_MACH_SMDK2413)	+= mach-smdk2413.o
-obj-$(CONFIG_MACH_VSTMS)	+= mach-vstms.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 7f916c8..c130d5f 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -25,11 +25,21 @@ config CPU_S3C2410
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
 
+config CPU_S3C2412
+	bool "SAMSUNG S3C2412"
+	depends on ARCH_S3C24XX
+	select CPU_ARM926T
+	select CPU_LLSERIAL_S3C2440
+	select S3C2412_PM if PM
+	select S3C2412_DMA if S3C24XX_DMA
+	help
+	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
 if CPU_S3C2410
 
 config S3C2410_DMA
 	bool
-	depends on S3C2410_DMA && CPU_S3C2410
+	depends on S3C24XX_DMA && CPU_S3C2410
 	default y if CPU_S3C2410
 	help
 	  DMA device selection for S3C2410 and compatible CPUs
@@ -160,6 +170,83 @@ config MACH_VR1000
 
 endif	# CPU_S3C2410
 
+if CPU_S3C2412
+
+config CPU_S3C2412_ONLY
+	bool
+	depends on ARCH_S3C24XX && !CPU_S3C2410 && \
+		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+		   !CPU_S3C2443 && CPU_S3C2412
+	default y
+
+config S3C2412_DMA
+	bool
+	help
+	  Internal config node for S3C2412 DMA support
+
+config S3C2412_PM
+	bool
+	help
+	  Internal config node to apply S3C2412 power management
+
+config S3C2412_PM_SLEEP
+	bool
+	help
+	  Internal config node to apply sleep for S3C2412 power management.
+	  Can be selected by another SoCs with similar sleep procedure.
+
+comment "S3C2412 Boards"
+
+#
+# The "S3C2412 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_JIVE
+	bool "Logitech Jive"
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Logitech Jive.
+
+config MACH_JIVE_SHOW_BOOTLOADER
+	bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
+	depends on MACH_JIVE && EXPERIMENTAL
+
+config MACH_S3C2413
+	bool
+	help
+	  Internal node for S3C2413 version of SMDK2413, so that
+	  machine_is_s3c2413() will work when MACH_SMDK2413 is
+	  selected
+
+config MACH_SMDK2412
+	bool "SMDK2412"
+	select MACH_SMDK2413
+	help
+	  Say Y here if you are using an SMDK2412
+
+	  Note, this shares support with SMDK2413, so will automatically
+	  select MACH_SMDK2413.
+
+config MACH_SMDK2413
+	bool "SMDK2413"
+	select MACH_S3C2413
+	select MACH_SMDK
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using an SMDK2413
+
+config MACH_VSTMS
+	bool "VMSTMS"
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using an VSTMS board
+
+endif	# CPU_S3C2412
+
 endmenu	# SAMSUNG S3C24XX SoCs Support
 
 endif	# ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index b6afbf84..f5af4af 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -18,6 +18,11 @@ obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
+obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
+obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
+
 #
 # machine support
 # following is ordered alphabetically by option text.
@@ -36,6 +41,10 @@ obj-$(CONFIG_ARCH_SMDK2410)		+= mach-smdk2410.o
 obj-$(CONFIG_MACH_TCT_HAMMER)		+= mach-tct_hammer.o
 obj-$(CONFIG_MACH_VR1000)		+= mach-vr1000.o usb-simtec.o
 
+obj-$(CONFIG_MACH_JIVE)			+= mach-jive.o
+obj-$(CONFIG_MACH_SMDK2413)		+= mach-smdk2413.o
+obj-$(CONFIG_MACH_VSTMS)		+= mach-vstms.o
+
 # common bits of machine support
 
 obj-$(CONFIG_SIMTEC_NOR)		+= nor-simtec.o
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
similarity index 100%
rename from arch/arm/mach-s3c2412/clock.c
rename to arch/arm/mach-s3c24xx/clock-s3c2412.c
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
similarity index 100%
rename from arch/arm/mach-s3c2412/dma.c
rename to arch/arm/mach-s3c24xx/dma-s3c2412.c
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c
similarity index 100%
rename from arch/arm/mach-s3c2412/irq.c
rename to arch/arm/mach-s3c24xx/irq-s3c2412.c
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
similarity index 100%
rename from arch/arm/mach-s3c2412/mach-jive.c
rename to arch/arm/mach-s3c24xx/mach-jive.c
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
similarity index 100%
rename from arch/arm/mach-s3c2412/mach-smdk2413.c
rename to arch/arm/mach-s3c24xx/mach-smdk2413.c
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
similarity index 100%
rename from arch/arm/mach-s3c2412/mach-vstms.c
rename to arch/arm/mach-s3c24xx/mach-vstms.c
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
similarity index 100%
rename from arch/arm/mach-s3c2412/pm.c
rename to arch/arm/mach-s3c24xx/pm-s3c2412.c
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
similarity index 100%
rename from arch/arm/mach-s3c2412/s3c2412.c
rename to arch/arm/mach-s3c24xx/s3c2412.c
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S
similarity index 100%
rename from arch/arm/mach-s3c2412/sleep.S
rename to arch/arm/mach-s3c24xx/sleep-s3c2412.S
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH] Move S3C2412_PM_SLEEP to common platform code
  2012-02-15 22:55 ` [PATCH 08/12] ARM: S3C2412: move mach-s3c2412/* into mach/s3c24xx/ Kukjin Kim
@ 2012-02-28 21:34   ` Heiko Stübner
  2012-03-01  4:10     ` Kukjin Kim
  0 siblings, 1 reply; 22+ messages in thread
From: Heiko Stübner @ 2012-02-28 21:34 UTC (permalink / raw)
  To: linux-arm-kernel

S3C2412_PM_SLEEP is also used by the S3C2416, so move it out of the
if CPU_S3C2412 block to the common platform code to prevent warnings
when S3C2416_PM is selected but not CPU_S3C2412.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
this should probably be folded into the S3C2412 move patch

 arch/arm/mach-s3c24xx/Kconfig |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 599e025..158958c 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -83,6 +83,12 @@ config CPU_S3C2443
 
 comment "S3C24XX base platform code"
 
+config S3C2412_PM_SLEEP
+	bool
+	help
+	  Internal config node to apply sleep for S3C2412 power management.
+	  Can be selected by another SoCs with similar sleep procedure.
+
 config S3C24XX_DMA
 	bool "S3C2410 DMA support"
 	depends on ARCH_S3C24XX
@@ -253,12 +259,6 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
-config S3C2412_PM_SLEEP
-	bool
-	help
-	  Internal config node to apply sleep for S3C2412 power management.
-	  Can be selected by another SoCs with similar sleep procedure.
-
 comment "S3C2412 Boards"
 
 #
-- 
1.7.2.3

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH] Move S3C2412_PM_SLEEP to common platform code
  2012-02-28 21:34   ` [PATCH] Move S3C2412_PM_SLEEP to common platform code Heiko Stübner
@ 2012-03-01  4:10     ` Kukjin Kim
  0 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-03-01  4:10 UTC (permalink / raw)
  To: linux-arm-kernel

Heiko St?bner wrote:
> 
> S3C2412_PM_SLEEP is also used by the S3C2416, so move it out of the
> if CPU_S3C2412 block to the common platform code to prevent warnings
> when S3C2416_PM is selected but not CPU_S3C2412.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> this should probably be folded into the S3C2412 move patch
> 
>  arch/arm/mach-s3c24xx/Kconfig |   12 ++++++------
>  1 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index 599e025..158958c 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -83,6 +83,12 @@ config CPU_S3C2443
> 
>  comment "S3C24XX base platform code"
> 
> +config S3C2412_PM_SLEEP
> +	bool
> +	help
> +	  Internal config node to apply sleep for S3C2412 power management.
> +	  Can be selected by another SoCs with similar sleep procedure.
> +
>  config S3C24XX_DMA
>  	bool "S3C2410 DMA support"
>  	depends on ARCH_S3C24XX
> @@ -253,12 +259,6 @@ config S3C2412_PM
>  	help
>  	  Internal config node to apply S3C2412 power management
> 
> -config S3C2412_PM_SLEEP
> -	bool
> -	help
> -	  Internal config node to apply sleep for S3C2412 power management.
> -	  Can be selected by another SoCs with similar sleep procedure.
> -
>  comment "S3C2412 Boards"
> 
>  #
> --
> 1.7.2.3

Looks good to me and will apply.
Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
                   ` (7 preceding siblings ...)
  2012-02-15 22:55 ` [PATCH 08/12] ARM: S3C2412: move mach-s3c2412/* into mach/s3c24xx/ Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-21 10:42   ` Heiko Stübner
  2012-02-28 21:18   ` Heiko Stübner
  2012-02-15 22:55 ` [PATCH 10/12] ARM: S3C2440: move mach-s3c2440/* " Kukjin Kim
                   ` (2 subsequent siblings)
  11 siblings, 2 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

This patch moves S3C2416 stuff into mach-s3c24xx/ directory
so that we can merge the s3c24 series' directories to the
just one mach-s3c24xx/ directory.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2416/Kconfig                      |   46 -------------------
 arch/arm/mach-s3c2416/Makefile                     |   10 ----
 arch/arm/mach-s3c24xx/Kconfig                      |   47 ++++++++++++++++++++
 arch/arm/mach-s3c24xx/Makefile                     |    9 ++++
 .../clock.c => mach-s3c24xx/clock-s3c2416.c}       |    0
 .../irq.c => mach-s3c24xx/irq-s3c2416.c}           |    0
 .../{mach-s3c2416 => mach-s3c24xx}/mach-smdk2416.c |    0
 .../pm.c => mach-s3c24xx/pm-s3c2416.c}             |    0
 arch/arm/{mach-s3c2416 => mach-s3c24xx}/s3c2416.c  |    0
 .../setup-sdhci-gpio.c                             |    0
 10 files changed, 56 insertions(+), 56 deletions(-)
 rename arch/arm/{mach-s3c2416/clock.c => mach-s3c24xx/clock-s3c2416.c} (100%)
 rename arch/arm/{mach-s3c2416/irq.c => mach-s3c24xx/irq-s3c2416.c} (100%)
 rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/mach-smdk2416.c (100%)
 rename arch/arm/{mach-s3c2416/pm.c => mach-s3c24xx/pm-s3c2416.c} (100%)
 rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/s3c2416.c (100%)
 rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/setup-sdhci-gpio.c (100%)

diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 53d5c2b..faaa289 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -7,54 +7,8 @@
 # note, this also supports the S3C2450 which is so similar it has the same
 # ID code as the S3C2416.
 
-config CPU_S3C2416
-	bool
-	depends on ARCH_S3C24XX
-	select CPU_ARM926T
-	select S3C2416_DMA if S3C2410_DMA
-	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
-	select S3C2443_CLOCK
-	help
-	  Support for the S3C2416 SoC from the S3C24XX line
-
 config S3C2416_DMA
 	bool
 	depends on CPU_S3C2416
 	help
 	  Internal config node for S3C2416 DMA support
-
-config S3C2416_PM
-	bool
-	select S3C2412_PM_SLEEP
-	help
-	  Internal config node to apply S3C2416 power management
-
-config S3C2416_SETUP_SDHCI
-	bool
-	select S3C2416_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for S3C2416 based SDHCI systems
-
-config S3C2416_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-menu "S3C2416 Machines"
-
-config MACH_SMDK2416
-	bool "SMDK2416"
-	select CPU_S3C2416
-	select MACH_SMDK
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select S3C2416_SETUP_SDHCI
-	select S3C2416_PM if PM
-	help
-	  Say Y here if you are using an SMDK2416
-
-endmenu
diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile
index ca0cd22..3299f19 100644
--- a/arch/arm/mach-s3c2416/Makefile
+++ b/arch/arm/mach-s3c2416/Makefile
@@ -9,14 +9,4 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock.o
-obj-$(CONFIG_CPU_S3C2416)	+= irq.o
-obj-$(CONFIG_S3C2416_PM)	+= pm.o
 #obj-$(CONFIG_S3C2416_DMA)	+= dma.o
-
-# Device setup
-obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK2416)	+= mach-smdk2416.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index c130d5f..69529dd 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -35,6 +35,18 @@ config CPU_S3C2412
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
+config CPU_S3C2416
+	bool "SAMSUNG S3C2416/S3C2450"
+	depends on ARCH_S3C24XX
+	select CPU_ARM926T
+	select CPU_LLSERIAL_S3C2440
+	select SAMSUNG_CLKSRC
+	select S3C2443_CLOCK
+	select S3C2416_DMA if S3C24XX_DMA
+	select S3C2416_PM if PM
+	help
+	  Support for the S3C2416 SoC from the S3C24XX line
+
 if CPU_S3C2410
 
 config S3C2410_DMA
@@ -247,6 +259,41 @@ config MACH_VSTMS
 
 endif	# CPU_S3C2412
 
+if CPU_S3C2416
+
+config S3C2416_PM
+	bool
+	select S3C2412_PM_SLEEP
+	help
+	  Internal config node to apply S3C2416 power management
+
+config S3C2416_SETUP_SDHCI
+	bool
+	select S3C2416_SETUP_SDHCI_GPIO
+	help
+	  Internal helper functions for S3C2416 based SDHCI systems
+
+config S3C2416_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
+comment "S3C2416 Boards"
+
+config MACH_SMDK2416
+	bool "SMDK2416"
+	select MACH_SMDK
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select S3C2416_SETUP_SDHCI
+	help
+	  Say Y here if you are using an SMDK2416
+
+endif	# CPU_S3C2416
+
 endmenu	# SAMSUNG S3C24XX SoCs Support
 
 endif	# ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index f5af4af..789aa5c 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -23,6 +23,9 @@ obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o irq-s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
+
 #
 # machine support
 # following is ordered alphabetically by option text.
@@ -45,6 +48,8 @@ obj-$(CONFIG_MACH_JIVE)			+= mach-jive.o
 obj-$(CONFIG_MACH_SMDK2413)		+= mach-smdk2413.o
 obj-$(CONFIG_MACH_VSTMS)		+= mach-vstms.o
 
+obj-$(CONFIG_MACH_SMDK2416)		+= mach-smdk2416.o
+
 # common bits of machine support
 
 obj-$(CONFIG_SIMTEC_NOR)		+= nor-simtec.o
@@ -52,3 +57,7 @@ obj-$(CONFIG_SIMTEC_NOR)		+= nor-simtec.o
 # machine additions
 
 obj-$(CONFIG_MACH_BAST_IDE)		+= bast-ide.o
+
+# device setup
+
+obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
similarity index 100%
rename from arch/arm/mach-s3c2416/clock.c
rename to arch/arm/mach-s3c24xx/clock-s3c2416.c
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c
similarity index 100%
rename from arch/arm/mach-s3c2416/irq.c
rename to arch/arm/mach-s3c24xx/irq-s3c2416.c
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
similarity index 100%
rename from arch/arm/mach-s3c2416/mach-smdk2416.c
rename to arch/arm/mach-s3c24xx/mach-smdk2416.c
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c
similarity index 100%
rename from arch/arm/mach-s3c2416/pm.c
rename to arch/arm/mach-s3c24xx/pm-s3c2416.c
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
similarity index 100%
rename from arch/arm/mach-s3c2416/s3c2416.c
rename to arch/arm/mach-s3c24xx/s3c2416.c
diff --git a/arch/arm/mach-s3c2416/setup-sdhci-gpio.c b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
similarity index 100%
rename from arch/arm/mach-s3c2416/setup-sdhci-gpio.c
rename to arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
  2012-02-15 22:55 ` [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/ Kukjin Kim
@ 2012-02-21 10:42   ` Heiko Stübner
  2012-02-21 11:14     ` Kukjin Kim
  2012-02-28 21:18   ` Heiko Stübner
  1 sibling, 1 reply; 22+ messages in thread
From: Heiko Stübner @ 2012-02-21 10:42 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Kgene,

Am Mittwoch, 15. Februar 2012, 23:55:43 schrieb Kukjin Kim:
> This patch moves S3C2416 stuff into mach-s3c24xx/ directory
> so that we can merge the s3c24 series' directories to the
> just one mach-s3c24xx/ directory.
> 
> Cc: Ben Dooks <ben-linux@fluff.org>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
the patch is missing something like the following to prevent an error because 
"built-in.o" in mach-s3c2416 cannot be found:


diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f3f6d97..2e46fe9 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -175,7 +175,7 @@ machine-$(CONFIG_ARCH_PRIMA2)               := prima2
 machine-$(CONFIG_ARCH_PXA)             := pxa
 machine-$(CONFIG_ARCH_REALVIEW)                := realview
 machine-$(CONFIG_ARCH_RPC)             := rpc
-machine-$(CONFIG_ARCH_S3C24XX)         := s3c24xx s3c2412 s3c2416 s3c2440
+machine-$(CONFIG_ARCH_S3C24XX)         := s3c24xx s3c2412 s3c2440
 machine-$(CONFIG_ARCH_S3C64XX)         := s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)         := s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)         := s5pc100


Heiko

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
  2012-02-21 10:42   ` Heiko Stübner
@ 2012-02-21 11:14     ` Kukjin Kim
  0 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-21 11:14 UTC (permalink / raw)
  To: linux-arm-kernel

Heiko St?bner wrote:
> 
> Hi Kgene,
> 
Hi,

> Am Mittwoch, 15. Februar 2012, 23:55:43 schrieb Kukjin Kim:
> > This patch moves S3C2416 stuff into mach-s3c24xx/ directory
> > so that we can merge the s3c24 series' directories to the
> > just one mach-s3c24xx/ directory.
> >
> > Cc: Ben Dooks <ben-linux@fluff.org>
> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> the patch is missing something like the following to prevent an error
> because
> "built-in.o" in mach-s3c2416 cannot be found:
> 
Yes, you're right and it is due to dummy file in mach-s3c2416/.

I think, it can be solved after done of moving remained files to regarding
directory such as drivers/cpufreq/.

As a note, you can see it before this weekend :)

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
  2012-02-15 22:55 ` [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/ Kukjin Kim
  2012-02-21 10:42   ` Heiko Stübner
@ 2012-02-28 21:18   ` Heiko Stübner
  2012-03-01  4:11     ` Kukjin Kim
  1 sibling, 1 reply; 22+ messages in thread
From: Heiko Stübner @ 2012-02-28 21:18 UTC (permalink / raw)
  To: linux-arm-kernel

Am Mittwoch 15 Februar 2012, 23:55:43 schrieb Kukjin Kim:
> This patch moves S3C2416 stuff into mach-s3c24xx/ directory
> so that we can merge the s3c24 series' directories to the
> just one mach-s3c24xx/ directory.
> 
> Cc: Ben Dooks <ben-linux@fluff.org>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

On S3C2416 hardware

Tested-by: Heiko Stuebner <heiko@sntech.de>

> ---
>  arch/arm/mach-s3c2416/Kconfig                      |   46
> ------------------- arch/arm/mach-s3c2416/Makefile                     |  
> 10 ----
>  arch/arm/mach-s3c24xx/Kconfig                      |   47
> ++++++++++++++++++++ arch/arm/mach-s3c24xx/Makefile                     | 
>   9 ++++
>  .../clock.c => mach-s3c24xx/clock-s3c2416.c}       |    0
>  .../irq.c => mach-s3c24xx/irq-s3c2416.c}           |    0
>  .../{mach-s3c2416 => mach-s3c24xx}/mach-smdk2416.c |    0
>  .../pm.c => mach-s3c24xx/pm-s3c2416.c}             |    0
>  arch/arm/{mach-s3c2416 => mach-s3c24xx}/s3c2416.c  |    0
>  .../setup-sdhci-gpio.c                             |    0
>  10 files changed, 56 insertions(+), 56 deletions(-)
>  rename arch/arm/{mach-s3c2416/clock.c => mach-s3c24xx/clock-s3c2416.c}
> (100%) rename arch/arm/{mach-s3c2416/irq.c => mach-s3c24xx/irq-s3c2416.c}
> (100%) rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/mach-smdk2416.c
> (100%) rename arch/arm/{mach-s3c2416/pm.c => mach-s3c24xx/pm-s3c2416.c}
> (100%) rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/s3c2416.c (100%)
>  rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/setup-sdhci-gpio.c (100%)
> 
> diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
> index 53d5c2b..faaa289 100644
> --- a/arch/arm/mach-s3c2416/Kconfig
> +++ b/arch/arm/mach-s3c2416/Kconfig
> @@ -7,54 +7,8 @@
>  # note, this also supports the S3C2450 which is so similar it has the same
>  # ID code as the S3C2416.
> 
> -config CPU_S3C2416
> -	bool
> -	depends on ARCH_S3C24XX
> -	select CPU_ARM926T
> -	select S3C2416_DMA if S3C2410_DMA
> -	select CPU_LLSERIAL_S3C2440
> -	select SAMSUNG_CLKSRC
> -	select S3C2443_CLOCK
> -	help
> -	  Support for the S3C2416 SoC from the S3C24XX line
> -
>  config S3C2416_DMA
>  	bool
>  	depends on CPU_S3C2416
>  	help
>  	  Internal config node for S3C2416 DMA support
> -
> -config S3C2416_PM
> -	bool
> -	select S3C2412_PM_SLEEP
> -	help
> -	  Internal config node to apply S3C2416 power management
> -
> -config S3C2416_SETUP_SDHCI
> -	bool
> -	select S3C2416_SETUP_SDHCI_GPIO
> -	help
> -	  Internal helper functions for S3C2416 based SDHCI systems
> -
> -config S3C2416_SETUP_SDHCI_GPIO
> -	bool
> -	help
> -	  Common setup code for SDHCI gpio.
> -
> -menu "S3C2416 Machines"
> -
> -config MACH_SMDK2416
> -	bool "SMDK2416"
> -	select CPU_S3C2416
> -	select MACH_SMDK
> -	select S3C_DEV_FB
> -	select S3C_DEV_HSMMC
> -	select S3C_DEV_HSMMC1
> -	select S3C_DEV_NAND
> -	select S3C_DEV_USB_HOST
> -	select S3C2416_SETUP_SDHCI
> -	select S3C2416_PM if PM
> -	help
> -	  Say Y here if you are using an SMDK2416
> -
> -endmenu
> diff --git a/arch/arm/mach-s3c2416/Makefile
> b/arch/arm/mach-s3c2416/Makefile index ca0cd22..3299f19 100644
> --- a/arch/arm/mach-s3c2416/Makefile
> +++ b/arch/arm/mach-s3c2416/Makefile
> @@ -9,14 +9,4 @@ obj-m				:=
>  obj-n				:=
>  obj-				:=
> 
> -obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock.o
> -obj-$(CONFIG_CPU_S3C2416)	+= irq.o
> -obj-$(CONFIG_S3C2416_PM)	+= pm.o
>  #obj-$(CONFIG_S3C2416_DMA)	+= dma.o
> -
> -# Device setup
> -obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
> -
> -# Machine support
> -
> -obj-$(CONFIG_MACH_SMDK2416)	+= mach-smdk2416.o
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index c130d5f..69529dd 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -35,6 +35,18 @@ config CPU_S3C2412
>  	help
>  	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
> 
> +config CPU_S3C2416
> +	bool "SAMSUNG S3C2416/S3C2450"
> +	depends on ARCH_S3C24XX
> +	select CPU_ARM926T
> +	select CPU_LLSERIAL_S3C2440
> +	select SAMSUNG_CLKSRC
> +	select S3C2443_CLOCK
> +	select S3C2416_DMA if S3C24XX_DMA
> +	select S3C2416_PM if PM
> +	help
> +	  Support for the S3C2416 SoC from the S3C24XX line
> +
>  if CPU_S3C2410
> 
>  config S3C2410_DMA
> @@ -247,6 +259,41 @@ config MACH_VSTMS
> 
>  endif	# CPU_S3C2412
> 
> +if CPU_S3C2416
> +
> +config S3C2416_PM
> +	bool
> +	select S3C2412_PM_SLEEP
> +	help
> +	  Internal config node to apply S3C2416 power management
> +
> +config S3C2416_SETUP_SDHCI
> +	bool
> +	select S3C2416_SETUP_SDHCI_GPIO
> +	help
> +	  Internal helper functions for S3C2416 based SDHCI systems
> +
> +config S3C2416_SETUP_SDHCI_GPIO
> +	bool
> +	help
> +	  Common setup code for SDHCI gpio.
> +
> +comment "S3C2416 Boards"
> +
> +config MACH_SMDK2416
> +	bool "SMDK2416"
> +	select MACH_SMDK
> +	select S3C_DEV_FB
> +	select S3C_DEV_HSMMC
> +	select S3C_DEV_HSMMC1
> +	select S3C_DEV_NAND
> +	select S3C_DEV_USB_HOST
> +	select S3C2416_SETUP_SDHCI
> +	help
> +	  Say Y here if you are using an SMDK2416
> +
> +endif	# CPU_S3C2416
> +
>  endmenu	# SAMSUNG S3C24XX SoCs Support
> 
>  endif	# ARCH_S3C24XX
> diff --git a/arch/arm/mach-s3c24xx/Makefile
> b/arch/arm/mach-s3c24xx/Makefile index f5af4af..789aa5c 100644
> --- a/arch/arm/mach-s3c24xx/Makefile
> +++ b/arch/arm/mach-s3c24xx/Makefile
> @@ -23,6 +23,9 @@ obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
>  obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
>  obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
> 
> +obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o irq-s3c2416.o clock-s3c2416.o
> +obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
> +
>  #
>  # machine support
>  # following is ordered alphabetically by option text.
> @@ -45,6 +48,8 @@ obj-$(CONFIG_MACH_JIVE)			+= mach-jive.o
>  obj-$(CONFIG_MACH_SMDK2413)		+= mach-smdk2413.o
>  obj-$(CONFIG_MACH_VSTMS)		+= mach-vstms.o
> 
> +obj-$(CONFIG_MACH_SMDK2416)		+= mach-smdk2416.o
> +
>  # common bits of machine support
> 
>  obj-$(CONFIG_SIMTEC_NOR)		+= nor-simtec.o
> @@ -52,3 +57,7 @@ obj-$(CONFIG_SIMTEC_NOR)		+= nor-simtec.o
>  # machine additions
> 
>  obj-$(CONFIG_MACH_BAST_IDE)		+= bast-ide.o
> +
> +# device setup
> +
> +obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
> diff --git a/arch/arm/mach-s3c2416/clock.c
> b/arch/arm/mach-s3c24xx/clock-s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/clock.c
> rename to arch/arm/mach-s3c24xx/clock-s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/irq.c
> b/arch/arm/mach-s3c24xx/irq-s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/irq.c
> rename to arch/arm/mach-s3c24xx/irq-s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c
> b/arch/arm/mach-s3c24xx/mach-smdk2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/mach-smdk2416.c
> rename to arch/arm/mach-s3c24xx/mach-smdk2416.c
> diff --git a/arch/arm/mach-s3c2416/pm.c
> b/arch/arm/mach-s3c24xx/pm-s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/pm.c
> rename to arch/arm/mach-s3c24xx/pm-s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/s3c2416.c
> b/arch/arm/mach-s3c24xx/s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/s3c2416.c
> rename to arch/arm/mach-s3c24xx/s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/setup-sdhci-gpio.c
> b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c similarity index 100%
> rename from arch/arm/mach-s3c2416/setup-sdhci-gpio.c
> rename to arch/arm/mach-s3c24xx/setup-sdhci-gpio.c

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
  2012-02-28 21:18   ` Heiko Stübner
@ 2012-03-01  4:11     ` Kukjin Kim
  0 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-03-01  4:11 UTC (permalink / raw)
  To: linux-arm-kernel

Heiko St?bner wrote:
> 
> Am Mittwoch 15 Februar 2012, 23:55:43 schrieb Kukjin Kim:
> > This patch moves S3C2416 stuff into mach-s3c24xx/ directory
> > so that we can merge the s3c24 series' directories to the
> > just one mach-s3c24xx/ directory.
> >
> > Cc: Ben Dooks <ben-linux@fluff.org>
> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> 
> On S3C2416 hardware
> 
> Tested-by: Heiko Stuebner <heiko@sntech.de>
> 
Thank you for your testing and will amend this commit.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 10/12] ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
                   ` (8 preceding siblings ...)
  2012-02-15 22:55 ` [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/ Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-15 22:55 ` [PATCH 11/12] ARM: S3C2443: move mach-s3c2443/* " Kukjin Kim
  2012-02-28 21:39 ` [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Heiko Stübner
  11 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

This patch moves S3C2440 stuff into mach-s3c24xx/ directory
so that we can merge the s3c24 series' directories to the
just one mach-s3c24xx/ directory.

And this patch is including following.
- re-ordered alphabetically by option text at Kconfig and Makefile

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c2440/Kconfig                      |  165 -------------------
 arch/arm/mach-s3c2440/Makefile                     |   26 +---
 arch/arm/mach-s3c2440/common.h                     |   17 --
 arch/arm/mach-s3c24xx/Kconfig                      |  169 +++++++++++++++++++-
 arch/arm/mach-s3c24xx/Makefile                     |   17 ++
 .../clock.c => mach-s3c24xx/clock-s3c2440.c}       |    0
 .../clock-s3c244x.c}                               |    0
 arch/arm/mach-s3c24xx/common.h                     |    6 +
 .../dma.c => mach-s3c24xx/dma-s3c2440.c}           |    0
 .../include/mach/gta02.h                           |    0
 .../irq.c => mach-s3c24xx/irq-s3c2440.c}           |    0
 .../s3c244x-irq.c => mach-s3c24xx/irq-s3c244x.c}   |    0
 .../{mach-s3c2440 => mach-s3c24xx}/mach-anubis.c   |    0
 .../mach-at2440evb.c                               |    0
 .../{mach-s3c2440 => mach-s3c24xx}/mach-gta02.c    |    0
 .../{mach-s3c2440 => mach-s3c24xx}/mach-mini2440.c |    0
 .../{mach-s3c2440 => mach-s3c24xx}/mach-nexcoder.c |    0
 .../mach-osiris-dvs.c                              |    0
 .../{mach-s3c2440 => mach-s3c24xx}/mach-osiris.c   |    0
 .../{mach-s3c2440 => mach-s3c24xx}/mach-rx1950.c   |    0
 .../{mach-s3c2440 => mach-s3c24xx}/mach-rx3715.c   |    0
 .../{mach-s3c2440 => mach-s3c24xx}/mach-smdk2440.c |    0
 arch/arm/{mach-s3c2440 => mach-s3c24xx}/s3c2440.c  |    0
 arch/arm/{mach-s3c2440 => mach-s3c24xx}/s3c2442.c  |    0
 arch/arm/{mach-s3c2440 => mach-s3c24xx}/s3c244x.c  |    0
 25 files changed, 191 insertions(+), 209 deletions(-)
 delete mode 100644 arch/arm/mach-s3c2440/common.h
 rename arch/arm/{mach-s3c2440/clock.c => mach-s3c24xx/clock-s3c2440.c} (100%)
 rename arch/arm/{mach-s3c2440/s3c244x-clock.c => mach-s3c24xx/clock-s3c244x.c} (100%)
 rename arch/arm/{mach-s3c2440/dma.c => mach-s3c24xx/dma-s3c2440.c} (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/include/mach/gta02.h (100%)
 rename arch/arm/{mach-s3c2440/irq.c => mach-s3c24xx/irq-s3c2440.c} (100%)
 rename arch/arm/{mach-s3c2440/s3c244x-irq.c => mach-s3c24xx/irq-s3c244x.c} (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/mach-anubis.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/mach-at2440evb.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/mach-gta02.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/mach-mini2440.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/mach-nexcoder.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/mach-osiris-dvs.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/mach-osiris.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/mach-rx1950.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/mach-rx3715.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/mach-smdk2440.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/s3c2440.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/s3c2442.c (100%)
 rename arch/arm/{mach-s3c2440 => mach-s3c24xx}/s3c244x.c (100%)

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 914e620..ece7a10 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -2,35 +2,6 @@
 #
 # Licensed under GPLv2
 
-config CPU_S3C2440
-	bool
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select S3C2440_DMA if S3C2410_DMA
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-	bool
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C244X
-	bool
-	depends on CPU_S3C2440 || CPU_S3C2442
-	help
-	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-
-
 config S3C2440_CPUFREQ
 	bool "S3C2440/S3C2442 CPU Frequency scaling support"
 	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
@@ -64,139 +35,3 @@ config S3C2440_PLL_16934400
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
-config S3C2440_DMA
-	bool
-	depends on CPU_S3C2440
-	help
-	  Support for S3C2440 specific DMA code5A
-
-menu "S3C2440 and S3C2442 Machines"
-
-config MACH_ANUBIS
-	bool "Simtec Electronics ANUBIS"
-	select CPU_S3C2440
-	select S3C24XX_DCLK
-	select PM_SIMTEC if PM
-	select HAVE_PATA_PLATFORM
-	select S3C24XX_GPIO_EXTRA64
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec Electronics ANUBIS
-	  development system
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select CPU_S3C2442
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select I2C
-	select POWER_SUPPLY
-	select MACH_NEO1973
-	select S3C2410_PWM
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-config MACH_OSIRIS
-	bool "Simtec IM2440D20 (OSIRIS) module"
-	select CPU_S3C2440
-	select S3C24XX_DCLK
-	select PM_SIMTEC if PM
-	select S3C24XX_GPIO_EXTRA128
-	select S3C2440_XTAL_12000000
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Simtec IM2440D20 module, also
-	  known as the Osiris.
-
-config MACH_OSIRIS_DVS
-	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
-	depends on MACH_OSIRIS
-	select TPS65010
-	help
-	  Say Y/M here if you want to have dynamic voltage scaling support
-	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
-	  The DVS driver alters the voltage supplied to the ARM core
-	  depending on the frequency it is running at. The driver itself
-	  does not do any of the frequency alteration, which is left up
-	  to the cpufreq driver.
-
-config MACH_RX3715
-	bool "HP iPAQ rx3715"
-	select CPU_S3C2440
-	select S3C2440_XTAL_16934400
-	select PM_H1940 if PM
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
-	bool "SMDK2440"
-	select CPU_S3C2440
-	select S3C2440_XTAL_16934400
-	select MACH_SMDK
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the SMDK2440.
-
-config MACH_NEXCODER_2440
- 	bool "NexVision NEXCODER 2440 Light Board"
- 	select CPU_S3C2440
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
- 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config SMDK2440_CPU2440
-	bool "SMDK2440 with S3C2440 CPU module"
-	default y if ARCH_S3C2440
-	select S3C2440_XTAL_16934400
-	select CPU_S3C2440
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	select CPU_S3C2442
-
-config MACH_AT2440EVB
-	bool "Avantech AT2440EVB development board"
-	select CPU_S3C2440
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
-	bool "MINI2440 development board"
-	select CPU_S3C2440
-	select EEPROM_AT24
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_TRIGGER
-	select LEDS_TRIGGER_BACKLIGHT
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
-	  available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-config MACH_RX1950
-	bool "HP iPAQ rx1950"
-	select CPU_S3C2442
-	select S3C24XX_DCLK
-	select PM_H1940 if PM
-	select I2C
-	select S3C2410_PWM
-	select S3C_DEV_NAND
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C2440_XTAL_16934400
-	help
-	   Say Y here if you're using HP iPAQ rx1950
-
-endmenu
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index d5440fa..c460924 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -9,33 +9,9 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o dsc.o
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+obj-$(CONFIG_CPU_S3C2440)	+= dsc.o
 
-obj-$(CONFIG_CPU_S3C2440)	+= irq.o
-obj-$(CONFIG_CPU_S3C2440)	+= clock.o
-obj-$(CONFIG_S3C2440_DMA)	+= dma.o
-
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 
 obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
-obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
-
-# extra machine support
-
-obj-$(CONFIG_MACH_OSIRIS_DVS)	+= mach-osiris-dvs.o
diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h
deleted file mode 100644
index db8a98a..0000000
--- a/arch/arm/mach-s3c2440/common.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S3C2440 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
-#define __ARCH_ARM_MACH_S3C2440_COMMON_H
-
-void s3c2440_restart(char mode, const char *cmd);
-
-#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 69529dd..aa295f8 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -47,12 +47,35 @@ config CPU_S3C2416
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
+config CPU_S3C2440
+	bool "SAMSUNG S3C2440"
+	select CPU_ARM920T
+	select CPU_LLSERIAL_S3C2440
+	select S3C2410_CLOCK
+	select S3C2410_PM if PM
+	select S3C2440_DMA if S3C24XX_DMA
+	help
+	  Support for S3C2440 Samsung Mobile CPU based systems.
+
+config CPU_S3C2442
+	bool "SAMSUNG S3C2442"
+	select CPU_ARM920T
+	select CPU_LLSERIAL_S3C2440
+	select S3C2410_CLOCK
+	select S3C2410_PM if PM
+	help
+	  Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+	def_bool y
+	depends on CPU_S3C2440 || CPU_S3C2442
+
 if CPU_S3C2410
 
 config S3C2410_DMA
 	bool
-	depends on S3C24XX_DMA && CPU_S3C2410
-	default y if CPU_S3C2410
+	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
+	default y if CPU_S3C2410 || CPU_S3C2442
 	help
 	  DMA device selection for S3C2410 and compatible CPUs
 
@@ -294,6 +317,148 @@ config MACH_SMDK2416
 
 endif	# CPU_S3C2416
 
+if CPU_S3C2440
+
+config S3C2440_DMA
+	bool
+	help
+	  Support for S3C2440 specific DMA code5A
+
+comment "S3C2440 Boards"
+
+#
+# The "S3C2440 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_ANUBIS
+	bool "Simtec Electronics ANUBIS"
+	select S3C24XX_DCLK
+	select PM_SIMTEC if PM
+	select HAVE_PATA_PLATFORM
+	select S3C24XX_GPIO_EXTRA64
+	select S3C2440_XTAL_12000000
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here if you are using the Simtec Electronics ANUBIS
+	  development system
+
+config MACH_AT2440EVB
+	bool "Avantech AT2440EVB development board"
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the AT2440EVB development board
+
+config MACH_MINI2440
+	bool "MINI2440 development board"
+	select EEPROM_AT24
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_TRIGGER
+	select LEDS_TRIGGER_BACKLIGHT
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	help
+	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
+	  available via various sources. It can come with a 3.5" or 7" touch LCD.
+
+config MACH_NEXCODER_2440
+	bool "NexVision NEXCODER 2440 Light Board"
+	select S3C2440_XTAL_12000000
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config MACH_OSIRIS
+	bool "Simtec IM2440D20 (OSIRIS) module"
+	select S3C24XX_DCLK
+	select PM_SIMTEC if PM
+	select S3C24XX_GPIO_EXTRA128
+	select S3C2440_XTAL_12000000
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the Simtec IM2440D20 module, also
+	  known as the Osiris.
+
+config MACH_OSIRIS_DVS
+	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+	depends on MACH_OSIRIS
+	select TPS65010
+	help
+	  Say Y/M here if you want to have dynamic voltage scaling support
+	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+	  The DVS driver alters the voltage supplied to the ARM core
+	  depending on the frequency it is running at. The driver itself
+	  does not do any of the frequency alteration, which is left up
+	  to the cpufreq driver.
+
+config MACH_RX3715
+	bool "HP iPAQ rx3715"
+	select S3C2440_XTAL_16934400
+	select PM_H1940 if PM
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+	bool "SMDK2440"
+	select S3C2440_XTAL_16934400
+	select MACH_SMDK
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	help
+	  Say Y here if you are using the SMDK2440.
+
+config SMDK2440_CPU2440
+	bool "SMDK2440 with S3C2440 CPU module"
+	default y if ARCH_S3C2440
+	select S3C2440_XTAL_16934400
+
+endif	# CPU_S3C2440
+
+if CPU_S3C2442
+
+comment "S3C2442 Boards"
+
+#
+# The "S3C2442 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_NEO1973_GTA02
+	bool "Openmoko GTA02 / Freerunner phone"
+	select MFD_PCF50633
+	select PCF50633_GPIO
+	select I2C
+	select POWER_SUPPLY
+	select MACH_NEO1973
+	select S3C2410_PWM
+	select S3C_DEV_USB_HOST
+	help
+	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
+config MACH_RX1950
+	bool "HP iPAQ rx1950"
+	select S3C24XX_DCLK
+	select PM_H1940 if PM
+	select I2C
+	select S3C2410_PWM
+	select S3C_DEV_NAND
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C2440_XTAL_16934400
+	help
+	   Say Y here if you're using HP iPAQ rx1950
+
+config SMDK2440_CPU2442
+	bool "SMDM2440 with S3C2442 CPU module"
+
+endif	# CPU_S3C2440
+
 endmenu	# SAMSUNG S3C24XX SoCs Support
 
 endif	# ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 789aa5c..f458cf2 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -26,6 +26,11 @@ obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o irq-s3c2416.o clock-s3c2416.o
 obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 
+obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o irq-s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
+
 #
 # machine support
 # following is ordered alphabetically by option text.
@@ -50,6 +55,17 @@ obj-$(CONFIG_MACH_VSTMS)		+= mach-vstms.o
 
 obj-$(CONFIG_MACH_SMDK2416)		+= mach-smdk2416.o
 
+obj-$(CONFIG_MACH_ANUBIS)		+= mach-anubis.o
+obj-$(CONFIG_MACH_AT2440EVB)		+= mach-at2440evb.o
+obj-$(CONFIG_MACH_MINI2440)		+= mach-mini2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440)	+= mach-nexcoder.o
+obj-$(CONFIG_MACH_OSIRIS)		+= mach-osiris.o
+obj-$(CONFIG_MACH_RX3715)		+= mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440)		+= mach-smdk2440.o
+
+obj-$(CONFIG_MACH_NEO1973_GTA02)	+= mach-gta02.o
+obj-$(CONFIG_MACH_RX1950)		+= mach-rx1950.o
+
 # common bits of machine support
 
 obj-$(CONFIG_SIMTEC_NOR)		+= nor-simtec.o
@@ -57,6 +73,7 @@ obj-$(CONFIG_SIMTEC_NOR)		+= nor-simtec.o
 # machine additions
 
 obj-$(CONFIG_MACH_BAST_IDE)		+= bast-ide.o
+obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
 
 # device setup
 
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
similarity index 100%
rename from arch/arm/mach-s3c2440/clock.c
rename to arch/arm/mach-s3c24xx/clock-s3c2440.c
diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c
similarity index 100%
rename from arch/arm/mach-s3c2440/s3c244x-clock.c
rename to arch/arm/mach-s3c24xx/clock-s3c244x.c
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index f65dc80..62a2e19 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -12,6 +12,12 @@
 #ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
 #define __ARCH_ARM_MACH_S3C2410_COMMON_H
 
+#ifdef CONFIG_CPU_S3C2410
 void s3c2410_restart(char mode, const char *cmd);
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+void s3c2440_restart(char mode, const char *cmd);
+#endif
 
 #endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
similarity index 100%
rename from arch/arm/mach-s3c2440/dma.c
rename to arch/arm/mach-s3c24xx/dma-s3c2440.c
diff --git a/arch/arm/mach-s3c2440/include/mach/gta02.h b/arch/arm/mach-s3c24xx/include/mach/gta02.h
similarity index 100%
rename from arch/arm/mach-s3c2440/include/mach/gta02.h
rename to arch/arm/mach-s3c24xx/include/mach/gta02.h
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c
similarity index 100%
rename from arch/arm/mach-s3c2440/irq.c
rename to arch/arm/mach-s3c24xx/irq-s3c2440.c
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c
similarity index 100%
rename from arch/arm/mach-s3c2440/s3c244x-irq.c
rename to arch/arm/mach-s3c24xx/irq-s3c244x.c
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
similarity index 100%
rename from arch/arm/mach-s3c2440/mach-anubis.c
rename to arch/arm/mach-s3c24xx/mach-anubis.c
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
similarity index 100%
rename from arch/arm/mach-s3c2440/mach-at2440evb.c
rename to arch/arm/mach-s3c24xx/mach-at2440evb.c
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
similarity index 100%
rename from arch/arm/mach-s3c2440/mach-gta02.c
rename to arch/arm/mach-s3c24xx/mach-gta02.c
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
similarity index 100%
rename from arch/arm/mach-s3c2440/mach-mini2440.c
rename to arch/arm/mach-s3c24xx/mach-mini2440.c
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
similarity index 100%
rename from arch/arm/mach-s3c2440/mach-nexcoder.c
rename to arch/arm/mach-s3c24xx/mach-nexcoder.c
diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
similarity index 100%
rename from arch/arm/mach-s3c2440/mach-osiris-dvs.c
rename to arch/arm/mach-s3c24xx/mach-osiris-dvs.c
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
similarity index 100%
rename from arch/arm/mach-s3c2440/mach-osiris.c
rename to arch/arm/mach-s3c24xx/mach-osiris.c
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
similarity index 100%
rename from arch/arm/mach-s3c2440/mach-rx1950.c
rename to arch/arm/mach-s3c24xx/mach-rx1950.c
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
similarity index 100%
rename from arch/arm/mach-s3c2440/mach-rx3715.c
rename to arch/arm/mach-s3c24xx/mach-rx3715.c
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
similarity index 100%
rename from arch/arm/mach-s3c2440/mach-smdk2440.c
rename to arch/arm/mach-s3c24xx/mach-smdk2440.c
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c
similarity index 100%
rename from arch/arm/mach-s3c2440/s3c2440.c
rename to arch/arm/mach-s3c24xx/s3c2440.c
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
similarity index 100%
rename from arch/arm/mach-s3c2440/s3c2442.c
rename to arch/arm/mach-s3c24xx/s3c2442.c
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
similarity index 100%
rename from arch/arm/mach-s3c2440/s3c244x.c
rename to arch/arm/mach-s3c24xx/s3c244x.c
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 11/12] ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
                   ` (9 preceding siblings ...)
  2012-02-15 22:55 ` [PATCH 10/12] ARM: S3C2440: move mach-s3c2440/* " Kukjin Kim
@ 2012-02-15 22:55 ` Kukjin Kim
  2012-02-28 21:39 ` [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Heiko Stübner
  11 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-02-15 22:55 UTC (permalink / raw)
  To: linux-arm-kernel

This patch moves S3C2443 stuff into mach-s3c24xx/ directory
so that we can merge the s3c24 series' directories to the
just one mach-s3c24xx/ directory.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/Kconfig                                   |    1 -
 arch/arm/Makefile                                  |    2 +-
 arch/arm/mach-s3c2443/Kconfig                      |   32 --------------------
 arch/arm/mach-s3c2443/Makefile                     |   20 ------------
 arch/arm/mach-s3c24xx/Kconfig                      |   29 ++++++++++++++++++
 arch/arm/mach-s3c24xx/Makefile                     |    5 +++
 .../clock.c => mach-s3c24xx/clock-s3c2443.c}       |    0
 .../dma.c => mach-s3c24xx/dma-s3c2443.c}           |    0
 .../irq.c => mach-s3c24xx/irq-s3c2443.c}           |    0
 .../{mach-s3c2443 => mach-s3c24xx}/mach-smdk2443.c |    0
 arch/arm/{mach-s3c2443 => mach-s3c24xx}/s3c2443.c  |    0
 11 files changed, 35 insertions(+), 54 deletions(-)
 delete mode 100644 arch/arm/mach-s3c2443/Kconfig
 delete mode 100644 arch/arm/mach-s3c2443/Makefile
 rename arch/arm/{mach-s3c2443/clock.c => mach-s3c24xx/clock-s3c2443.c} (100%)
 rename arch/arm/{mach-s3c2443/dma.c => mach-s3c24xx/dma-s3c2443.c} (100%)
 rename arch/arm/{mach-s3c2443/irq.c => mach-s3c24xx/irq-s3c2443.c} (100%)
 rename arch/arm/{mach-s3c2443 => mach-s3c24xx}/mach-smdk2443.c (100%)
 rename arch/arm/{mach-s3c2443 => mach-s3c24xx}/s3c2443.c (100%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f8044e9..22d6db3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1072,7 +1072,6 @@ if ARCH_S3C24XX
 source "arch/arm/mach-s3c2412/Kconfig"
 source "arch/arm/mach-s3c2416/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
 if ARCH_S3C64XX
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 59d9df4..f3f6d97 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -175,7 +175,7 @@ machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		:= s3c24xx s3c2412 s3c2416 s3c2440 s3c2443
+machine-$(CONFIG_ARCH_S3C24XX)		:= s3c24xx s3c2412 s3c2416 s3c2440
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
deleted file mode 100644
index 793a0fe..0000000
--- a/arch/arm/mach-s3c2443/Kconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config CPU_S3C2443
-	bool
-	depends on ARCH_S3C24XX
-	select CPU_ARM920T
-	select S3C2443_DMA if S3C2410_DMA
-	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
-	select S3C2443_CLOCK
-	help
-	  Support for the S3C2443 SoC from the S3C24XX line
-
-config S3C2443_DMA
-	bool
-	depends on CPU_S3C2443
-	help
-	  Internal config node for S3C2443 DMA support
-
-menu "S3C2443 Machines"
-
-config MACH_SMDK2443
-	bool "SMDK2443"
-	select CPU_S3C2443
-	select MACH_SMDK
-	select S3C_DEV_HSMMC1
-	help
-	  Say Y here if you are using an SMDK2443
-
-endmenu
diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile
deleted file mode 100644
index d1843c9..0000000
--- a/arch/arm/mach-s3c2443/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# arch/arm/mach-s3c2443/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
-obj-$(CONFIG_CPU_S3C2443)	+= irq.o
-obj-$(CONFIG_CPU_S3C2443)	+= clock.o
-
-obj-$(CONFIG_S3C2443_DMA)	+= dma.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK2443)	+= mach-smdk2443.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index aa295f8..e537577 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -70,6 +70,17 @@ config CPU_S3C244X
 	def_bool y
 	depends on CPU_S3C2440 || CPU_S3C2442
 
+config CPU_S3C2443
+	bool "SAMSUNG S3C2443"
+	depends on ARCH_S3C24XX
+	select CPU_ARM920T
+	select CPU_LLSERIAL_S3C2440
+	select SAMSUNG_CLKSRC
+	select S3C2443_CLOCK
+	select S3C2443_DMA if S3C24XX_DMA
+	help
+	  Support for the S3C2443 SoC from the S3C24XX line
+
 if CPU_S3C2410
 
 config S3C2410_DMA
@@ -459,6 +470,24 @@ config SMDK2440_CPU2442
 
 endif	# CPU_S3C2440
 
+if CPU_S3C2443
+
+config S3C2443_DMA
+	bool
+	help
+	  Internal config node for S3C2443 DMA support
+
+comment "S3C2443 Boards"
+
+config MACH_SMDK2443
+	bool "SMDK2443"
+	select MACH_SMDK
+	select S3C_DEV_HSMMC1
+	help
+	  Say Y here if you are using an SMDK2443
+
+endif	# CPU_S3C2443
+
 endmenu	# SAMSUNG S3C24XX SoCs Support
 
 endif	# ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index f458cf2..08b44a3 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -31,6 +31,9 @@ obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o irq-s3c244x.o clock-s3c244x.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o irq-s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
+
 #
 # machine support
 # following is ordered alphabetically by option text.
@@ -66,6 +69,8 @@ obj-$(CONFIG_ARCH_S3C2440)		+= mach-smdk2440.o
 obj-$(CONFIG_MACH_NEO1973_GTA02)	+= mach-gta02.o
 obj-$(CONFIG_MACH_RX1950)		+= mach-rx1950.o
 
+obj-$(CONFIG_MACH_SMDK2443)		+= mach-smdk2443.o
+
 # common bits of machine support
 
 obj-$(CONFIG_SIMTEC_NOR)		+= nor-simtec.o
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
similarity index 100%
rename from arch/arm/mach-s3c2443/clock.c
rename to arch/arm/mach-s3c24xx/clock-s3c2443.c
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
similarity index 100%
rename from arch/arm/mach-s3c2443/dma.c
rename to arch/arm/mach-s3c24xx/dma-s3c2443.c
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c
similarity index 100%
rename from arch/arm/mach-s3c2443/irq.c
rename to arch/arm/mach-s3c24xx/irq-s3c2443.c
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
similarity index 100%
rename from arch/arm/mach-s3c2443/mach-smdk2443.c
rename to arch/arm/mach-s3c24xx/mach-smdk2443.c
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
similarity index 100%
rename from arch/arm/mach-s3c2443/s3c2443.c
rename to arch/arm/mach-s3c24xx/s3c2443.c
-- 
1.7.4.4

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP
  2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
                   ` (10 preceding siblings ...)
  2012-02-15 22:55 ` [PATCH 11/12] ARM: S3C2443: move mach-s3c2443/* " Kukjin Kim
@ 2012-02-28 21:39 ` Heiko Stübner
  2012-03-01  3:51   ` Kukjin Kim
  11 siblings, 1 reply; 22+ messages in thread
From: Heiko Stübner @ 2012-02-28 21:39 UTC (permalink / raw)
  To: linux-arm-kernel

Am Mittwoch 15 Februar 2012, 23:55:34 schrieb Kukjin Kim:
> This patch aims to make a one mach- directory for S3C24XX SoCs
> and now not finished yet such as moving cpufreq and merging
> plat-s3c24xx/. I think it will be done maybe in a week.
> 
> [PATCH 01/12] ARM: S3C24XX: remove unused spi gpio setup functions
> [PATCH 02/12] ARM: S3C24XX: move spi-s3c24xx platdata out of mach
> [PATCH 03/12] ARM: S3C24XX: Remove extern declaration of clk_msysclk
> [PATCH 04/12] ARM: S3C24XX: move common S3C2443 clock definitions to
> [PATCH 05/12] ARM: S3C2410: move s3c2410_baseclk_add to clock.h
> [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
> [PATCH 07/12] ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/
> [PATCH 08/12] ARM: S3C2412: move mach-s3c2412/* into mach-s3c24xx/
> [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
> [PATCH 10/12] ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/
> [PATCH 11/12] ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/
could we move this forward please? :-)

As indicated by Olof's mail for tegra, we are near the 3.4 merge window and as 
is known everything must be in linux-next beforehand.

In my opinion it should also be possible to postpone the plat-s3c24xx cleanup 
for now and just bring this set on the road to reach 3.4.

Heiko

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP
  2012-02-28 21:39 ` [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Heiko Stübner
@ 2012-03-01  3:51   ` Kukjin Kim
  0 siblings, 0 replies; 22+ messages in thread
From: Kukjin Kim @ 2012-03-01  3:51 UTC (permalink / raw)
  To: linux-arm-kernel

Heiko St?bner wrote:
> 
> Am Mittwoch 15 Februar 2012, 23:55:34 schrieb Kukjin Kim:
> > This patch aims to make a one mach- directory for S3C24XX SoCs
> > and now not finished yet such as moving cpufreq and merging
> > plat-s3c24xx/. I think it will be done maybe in a week.
> >
> > [PATCH 01/12] ARM: S3C24XX: remove unused spi gpio setup functions
> > [PATCH 02/12] ARM: S3C24XX: move spi-s3c24xx platdata out of mach
> > [PATCH 03/12] ARM: S3C24XX: Remove extern declaration of clk_msysclk
> > [PATCH 04/12] ARM: S3C24XX: move common S3C2443 clock definitions to
> > [PATCH 05/12] ARM: S3C2410: move s3c2410_baseclk_add to clock.h
> > [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX
> > [PATCH 07/12] ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/
> > [PATCH 08/12] ARM: S3C2412: move mach-s3c2412/* into mach-s3c24xx/
> > [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
> > [PATCH 10/12] ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/
> > [PATCH 11/12] ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/
> could we move this forward please? :-)
> 
> As indicated by Olof's mail for tegra, we are near the 3.4 merge window
> and as
> is known everything must be in linux-next beforehand.
> 
> In my opinion it should also be possible to postpone the plat-s3c24xx
> cleanup
> for now and just bring this set on the road to reach 3.4.
> 
OK, I agree and let me move this into my -next, I think plat-s3c24xx cleanup
can be done soon though.

As a note, I will send this to arm-soc tree after couple of days for testing
this in linux-next.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2012-03-01  4:11 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
2012-02-15 22:55 ` [PATCH 01/12] ARM: S3C24XX: remove unused spi gpio setup functions Kukjin Kim
2012-02-15 22:55 ` [PATCH 02/12] ARM: S3C24XX: move spi-s3c24xx platdata out of mach Kukjin Kim
2012-02-15 22:55 ` [PATCH 03/12] ARM: S3C24XX: Remove extern declaration of clk_msysclk Kukjin Kim
2012-02-15 22:55 ` [PATCH 04/12] ARM: S3C24XX: move common S3C2443 clock definitions to clock.h Kukjin Kim
2012-02-15 22:55 ` [PATCH 05/12] ARM: S3C2410: move s3c2410_baseclk_add " Kukjin Kim
2012-02-15 22:55 ` [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX Kukjin Kim
2012-02-16  9:21   ` Felipe Balbi
2012-02-19 22:53   ` Florian Tobias Schandinat
2012-02-15 22:55 ` [PATCH 07/12] ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/ Kukjin Kim
2012-02-15 22:55 ` [PATCH 08/12] ARM: S3C2412: move mach-s3c2412/* into mach/s3c24xx/ Kukjin Kim
2012-02-28 21:34   ` [PATCH] Move S3C2412_PM_SLEEP to common platform code Heiko Stübner
2012-03-01  4:10     ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/ Kukjin Kim
2012-02-21 10:42   ` Heiko Stübner
2012-02-21 11:14     ` Kukjin Kim
2012-02-28 21:18   ` Heiko Stübner
2012-03-01  4:11     ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 10/12] ARM: S3C2440: move mach-s3c2440/* " Kukjin Kim
2012-02-15 22:55 ` [PATCH 11/12] ARM: S3C2443: move mach-s3c2443/* " Kukjin Kim
2012-02-28 21:39 ` [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Heiko Stübner
2012-03-01  3:51   ` Kukjin Kim

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).