From: rmallon@gmail.com (Ryan Mallon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 11/19] ARM: at91/PMC: make register base soc independent
Date: Thu, 23 Feb 2012 20:22:35 +1100 [thread overview]
Message-ID: <4F46055B.9050308@gmail.com> (raw)
In-Reply-To: <4F45FAF7.3080409@atmel.com>
On 23/02/12 19:38, Nicolas Ferre wrote:
> On 02/22/2012 11:50 PM, Ryan Mallon :
>> On 22/02/12 20:39, Nicolas Ferre wrote:
>>
>>> From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
>>>
>>> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
>>> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>>> Reviewed-by: Ryan Mallon <rmallon@gmail.com>
>>> ---
>>
>> <snip>
>>
>>> - seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
>>> - seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
>>> - seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
>>> - seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
>>> - seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
>>> + seq_printf(s, "SCSR = %8x\n", scsr = at91_pmc_read(AT91_PMC_SCSR));
>>> + seq_printf(s, "PCSR = %8x\n", pcsr = at91_pmc_read(AT91_PMC_PCSR));
>>
>>
>> I realise the original code is wrong, so doesn't need to be fixed in
>> this patch, but can we please move the assignments out of the seq_printf
>> calls.
>
> Well, I would not say "wrong". But ugly, for sure. I queue a patch to
> correct this just before this one.
Sorry, I meant ugly rather than wrong. When I first saw it, I thought your
replace script had made a mistake :-).
~Ryan
next prev parent reply other threads:[~2012-02-23 9:22 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-22 9:39 [PATCH v2 00/19] at91 first cleanup series for 3.4 Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 01/19] ARM: at91: factorise duplicated at91sam9 idle Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 02/19] ARM: at91/at91x40: remove use of at91_sys_read/write Nicolas Ferre
2012-02-22 14:36 ` Arnd Bergmann
2012-02-22 16:26 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 22:22 ` Ryan Mallon
2012-02-23 3:25 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-23 3:59 ` Ryan Mallon
2012-02-23 6:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-23 9:23 ` Ryan Mallon
2012-02-22 9:39 ` [PATCH v2 03/19] ARM: at91: make matrix register base soc independent Nicolas Ferre
2012-02-22 22:17 ` Ryan Mallon
2012-02-23 3:26 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 9:39 ` [PATCH v2 04/19] ARM: at91: make ST (System Timer) " Nicolas Ferre
2012-02-22 22:24 ` Ryan Mallon
2012-02-22 9:39 ` [PATCH v2 05/19] ARM: at91/ST: remove not needed casts Nicolas Ferre
2012-02-22 22:24 ` Ryan Mallon
2012-02-22 9:39 ` [PATCH v2 06/19] ARM: at91/pm_slowclock: rename register to named define Nicolas Ferre
2012-02-22 9:50 ` Russell King - ARM Linux
2012-02-22 17:34 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 9:39 ` [PATCH v2 07/19] ARM: at91/pm_slowclock: function slow_clock() accepts parameters Nicolas Ferre
2012-02-22 9:52 ` Russell King - ARM Linux
2012-02-22 12:58 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 13:18 ` Russell King - ARM Linux
2012-02-22 13:57 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 9:39 ` [PATCH v2 08/19] ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 09/19] ARM: at91: make sdram/ddr register base soc independent Nicolas Ferre
2012-02-22 22:33 ` Ryan Mallon
2012-02-23 8:56 ` Nicolas Ferre
2012-02-23 9:58 ` Nicolas Ferre
2012-02-23 10:51 ` Ryan Mallon
2012-02-23 13:47 ` Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 10/19] ARM: at91/pm_slowclock: add runtime detection of memory contoller Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 11/19] ARM: at91/PMC: make register base soc independent Nicolas Ferre
2012-02-22 22:50 ` Ryan Mallon
2012-02-23 8:38 ` Nicolas Ferre
2012-02-23 9:22 ` Ryan Mallon [this message]
2012-02-22 9:39 ` [PATCH v2 12/19] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use Nicolas Ferre
2012-02-22 14:50 ` Arnd Bergmann
2012-02-22 16:24 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 16:47 ` Arnd Bergmann
2012-02-22 17:07 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 17:25 ` Arnd Bergmann
2012-02-22 18:02 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 9:39 ` [PATCH v2 13/19] ARM: at91:rtc/rtc-at91sam9: ioremap register bank Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 14/19] ARM: at91/rtc-at91sam9: pass the GPBR to use via resources Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 15/19] ARM: at91: finally drop at91_sys_read/write Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 16/19] ARM: at91: merge SRAM Memory banks thanks to mirroring Nicolas Ferre
2012-02-22 23:13 ` Ryan Mallon
2012-02-23 3:28 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 9:39 ` [PATCH v2 17/19] Atmel: move console default platform_device to serial driver Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 18/19] ARM: at91/board-dt: drop default console Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 19/19] ARM: at91/board-dt: move at91_initialize() to init_irq() Nicolas Ferre
2012-02-22 9:48 ` Russell King - ARM Linux
2012-02-22 13:03 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 16:15 ` [PATCH 0/2] ARM: at91: two additional patches to cleanup series Nicolas Ferre
2012-02-22 16:15 ` [PATCH 1/2] ARM: at91: add at91sam9g25ek.dts in Makefile.boot Nicolas Ferre
2012-02-22 16:15 ` [PATCH 2/2] ARM: at91: properly sort dtb files " Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F46055B.9050308@gmail.com \
--to=rmallon@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).