linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: hunold@linuxtv.org (Michael Hunold)
To: linux-arm-kernel@lists.infradead.org
Subject: iMX53 quick start board and SD/MMC
Date: Wed, 29 Feb 2012 12:53:01 +0100	[thread overview]
Message-ID: <4F4E119D.7020104@linuxtv.org> (raw)

Hello all,

I am trying to setup a iMX53 quick start board. This is my first
encounter with Freescale, so please bear with me.

I used the Code Sourcery arm-2011.03 toolchain and a stock Linux 3.2.8
kernel. I used "imx_v4_v5_defconfig" and selected support for the "LOCO"
board, nothing more.

For the root filesystem I used a stock buildroot-2011.11. For the
beginning, I boot the system using NFS root filesystem.

The board boots just fine, but the SD/MMC card slot(s) are not
recognised by the kernel.

I see mxcmci_init() is getting called, but not the probe routine. Did I
miss anything important?

Can somebody confirm that the board works with stock Linux 3.2.8 kernel
at all?

I noticed that "imx-sdma imx35-sdma: firmware not found" is printed on
the console. I understand that the iMX53 has a special DMA engine, but
is it necessary for the SD/MMC card slots to function?

If so, where is the official source for the necessary firmware?

Thanks and best regards
Michael.

             reply	other threads:[~2012-02-29 11:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-29 11:53 Michael Hunold [this message]
2012-02-29 12:22 ` iMX53 quick start board and SD/MMC Baruch Siach
2012-02-29 12:45   ` Michael Hunold
2012-02-29 12:53     ` Baruch Siach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F4E119D.7020104@linuxtv.org \
    --to=hunold@linuxtv.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).