* [PATCH 0/2] mxc_ehci: expand usb_hwinit options from boardfile
@ 2012-02-28 17:48 Mehnert, Torsten
2012-03-01 15:10 ` Daniel Mack
0 siblings, 1 reply; 2+ messages in thread
From: Mehnert, Torsten @ 2012-02-28 17:48 UTC (permalink / raw)
To: linux-arm-kernel
This patch series is about to expand the possibilities to configure mxc USB hardware initialization from boardfile.
The expansions, defined in mxc_ehci.h, are implemented for the mx25.
Best regards,
Torsten
---
Torsten Mehnert
K?lte- und Geb?udeleittechnik (KGL)
?
ECKELMANN AG
Berliner Stra?e 161
D - 65205 Wiesbaden
?
Phone: +49 (0) 611 / 7103 - 370
Fax: +49 (0) 611 / 7103 - 133
e-Mail: mailto:t.mehnert at eckelmann.de
Web: http://www.eckelmann.de
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH 0/2] mxc_ehci: expand usb_hwinit options from boardfile
2012-02-28 17:48 [PATCH 0/2] mxc_ehci: expand usb_hwinit options from boardfile Mehnert, Torsten
@ 2012-03-01 15:10 ` Daniel Mack
0 siblings, 0 replies; 2+ messages in thread
From: Daniel Mack @ 2012-03-01 15:10 UTC (permalink / raw)
To: linux-arm-kernel
On 28.02.2012 18:48, Mehnert, Torsten wrote:
> This patch series is about to expand the possibilities to configure mxc USB hardware initialization from boardfile.
> The expansions, defined in mxc_ehci.h, are implemented for the mx25.
FWIW, they both seem reasonable to me. I didn't check the datasheet
though, nor can I test these changes.
Daniel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-03-01 15:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-28 17:48 [PATCH 0/2] mxc_ehci: expand usb_hwinit options from boardfile Mehnert, Torsten
2012-03-01 15:10 ` Daniel Mack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).