[PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup

[b-cousson@ti.com (Cousson, Benoit)]

On 3/2/2012 9:28 PM, Cousson, Benoit wrote:
> Hi Tony,
>
> On 3/2/2012 8:20 PM, Tony Lindgren wrote:
>> * Felipe Balbi<balbi@ti.com> [120302 09:43]:
>>> Hi,
>>>
>>> On Fri, Mar 02, 2012 at 05:50:23PM +0100, Benoit Cousson wrote:
>>>> Card detect IRQ from the TWL6030 used to be provided to the MMC
>>>> controller code using a statically allocated IRQ scheme:
>>>>
>>>> card_detect_irq = TWL6030_IRQ_BASE + MMCDETECT_INTR_OFFSET;
>>>>
>>>> This is no longer valid in a SPARSE_IRQ context since there is no more
>>>> pre-defined TWL6030_IRQ_BASE.
>>>>
>>>> Return the proper card detect IRQ value in the
>>>> twl6030_mmc_card_detect_config
>>>> that will be called from the MMC controller.
>>>>
>>>> Signed-off-by: Benoit Cousson<b-cousson@ti.com>
>>>> Cc: Felipe Balbi<balbi@ti.com>
>>>> Cc: Tony Lindgren<tony@atomide.com>
>>>> Cc: Rajendra Nayak<rnayak@ti.com>
>>>
>>> Reviewed-by: Felipe Balbi<balbi@ti.com>
>>>
>>>> ---
>>>> drivers/mfd/twl6030-irq.c | 3 ++-
>>>> 1 files changed, 2 insertions(+), 1 deletions(-)
>>>>
>>>> diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
>>>> index a1c7183..4a63de2 100644
>>>> --- a/drivers/mfd/twl6030-irq.c
>>>> +++ b/drivers/mfd/twl6030-irq.c
>>>> @@ -308,7 +308,8 @@ int twl6030_mmc_card_detect_config(void)
>>>> ret);
>>>> return ret;
>>>> }
>>>> - return 0;
>>>> +
>>>> + return twl6030_irq_base + MMCDETECT_INTR_OFFSET;
>>>> }
>>>> EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
>>>
>>> At some point this twl6030_mmc_card_detect_config() needs to vanish in
>>> favor of a better mechanism. Maybe passing the GPIO number an requiring
>>> the driver to request the GPIO, set its direction and use it as IRQ
>>> line.
>>>
>>> the only problem would arise if we end up hooking the Card Detect pin to
>>> a real IRQ line, but then we can use a flag to differentiate.
>>
>> I'm trying to leave out the need for this callback to pdata..
>> See mmc: omap_hsmmc: Simplify init for twl6030 MMC card detect
>> that does pretty much the same as Benoit's patch plus removes
>> the need for the callback.
>
> That's cool. I did that patch to still have a working MMC after my TWL
> series because I missed your MMC series :-(.
>
> The patch #4 "mmc: omap_hsmmc: Simplify init for twl6030 MMC card
> detect" is indeed simplifying a lot that IRQ mess.
>
> I will check with that TWL series, but since you are already using the
> twl6030_irq_base it should work without any trouble.

I created a for_3.4/twl_irq_gpio_fix branch based on irqdomain/next with 
all the TWL + GPIO patches except the DTS and without the MMC hacks.

And I merged it into your hsmmc-gpio branch. There is a small conflict 
in gpio-twl4030 but otherwise it works on the SDP4430.

I cannot test remotely with Panda or Beagle, the animals are already 
sleeping.

The branch is there if you want to check for OMAP3 as well.
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git 
for_3.4/twl_irq_gpio_fix

Regards,
Benoit