[PATCH] ARM: SPEAr600: Add device-tree support to SPEAr600 boards

[robherring2@gmail.com (Rob Herring)]

On 03/14/2012 08:27 AM, Arnd Bergmann wrote:
> On Wednesday 14 March 2012, Stefan Roese wrote:
>> On Wednesday 14 March 2012 10:48:44 Arnd Bergmann wrote:
>>>>> I would suggest you convert these to DT next so you can remove the
>>>>> amba_devs list. Which devices are these? If they are pl061 and
>>>>> pl010/pl011, the binding should be really easy to do.
>>>>
>>>> Yes. I really wanted to do that. But from a quick look at the pl011
>>>> driver (drivers/tty/serial/amba-pl011.c), this driver doesn't support DT
>>>> probing. I might have missed something here though. And ideas?
>>>
>>> amba primecell devices don't actually need to register to a "compatible"
>>> property, they are probed using the primecell ID, and the device tree
>>> is just used to tell the system about memory and IRQ resources.
>>

They do need to have "arm,primecell" for things to work as the type of
h/w is probeable, but the location of it is not. There should also be a
compatible property for the specific module (i.e. arm,pl011), but Linux
doesn't look at it. There's support for overriding the hw id in the DT
as well which some spear platforms need IIRC.

I thought I had added documentation for some of the primecells and Dave
Martin was going to do the rest, but seems it got dropped on the
floor... Off to dig in my git tree.

>> Ahh, I see. Let me see, if I can get this working...
> 
> I just saw that there is a patch series for pl061 that Rob Herring did at  
> 
> git://sources.calxeda.com/kernel/linux.git irqdomain-for-grant
> 
> Please have a look at that branch first.
> 

This is just interrupt support. The pl061 driver already supports DT.
And so do pl011, pl03x, pl022, pl330 (memory to memory only).

Rob

>>> Don't worry about the the gpio and uart devices if they are not in the
>>> first initial version. I do think that they should be done fairly soon
>>> though, before we get into most of the other devices.
>>>
>>> It's ok if you put a lot of the other devices in the dts file though,
>>> like the ethernet device, it gives a better overview of what is actually
>>> there, even if the driver does not actually use it yet.
>>
>> My initial idea was to push the devices once their DT support is accepted. 
>> Otherwise the bindings are still not settled.
> 
> Right, that makes sense. However, you can add a property containing
> 
> 	status = "disabled;
> 
> so that the device is visible in the source but no platform device gets
> generated. That would have no consequences at run time but can be helpful
> for review.
> 
> 	Arnd