[PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi

[PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi

[Shawn Guo]

Changes since v3:
 * Change imx compatible to "fsl,imx21-ssi"
 * Leave locking issue as a FIXME for Timur to sort out separately

---
Shawn Guo (10):
      ASoC: fsl: separate SSI and DMA Kconfig options
      ASoC: imx: merge sound/soc/imx into sound/soc/fsl
      ASoC: fsl: rename imx-pcm Kconfig options and filename
      ASoC: fsl: create fsl_utils to accommodate the common functions
      ASoC: fsl: remove helper fsl_asoc_get_codec_dev_name
      ASoC: fsl: check property 'compatible' for the machine name
      ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX
      ASoC: fsl: remove the fatal error checking on codec-handle
      ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers
      ASoC: fsl: add imx-sgtl5000 machine driver

 .../bindings/sound/imx-audio-sgtl5000.txt          |   24 +++
 arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig   |    1 +
 arch/powerpc/configs/mpc85xx_defconfig             |    1 +
 arch/powerpc/configs/mpc85xx_smp_defconfig         |    1 +
 sound/soc/Kconfig                                  |    1 -
 sound/soc/Makefile                                 |    1 -
 sound/soc/fsl/Kconfig                              |  124 ++++++++++++-
 sound/soc/fsl/Makefile                             |   29 +++-
 sound/soc/{imx => fsl}/eukrea-tlv320.c             |    2 +-
 sound/soc/fsl/fsl_ssi.c                            |  140 +++++++++++----
 sound/soc/fsl/fsl_utils.c                          |   91 ++++++++++
 sound/soc/fsl/fsl_utils.h                          |   26 +++
 sound/soc/{imx => fsl}/imx-audmux.c                |    0
 sound/soc/{imx => fsl}/imx-audmux.h                |    0
 .../{imx/imx-pcm-dma-mx2.c => fsl/imx-pcm-dma.c}   |    0
 sound/soc/{imx => fsl}/imx-pcm-fiq.c               |    0
 sound/soc/{imx => fsl}/imx-pcm.c                   |    0
 sound/soc/{imx => fsl}/imx-pcm.h                   |    0
 sound/soc/fsl/imx-sgtl5000.c                       |  177 ++++++++++++++++++
 sound/soc/{imx => fsl}/imx-ssi.c                   |    2 +-
 sound/soc/{imx => fsl}/imx-ssi.h                   |    0
 sound/soc/fsl/mpc8610_hpcd.c                       |  168 ++----------------
 sound/soc/{imx => fsl}/mx27vis-aic32x4.c           |    0
 sound/soc/fsl/p1022_ds.c                           |  190 ++------------------
 sound/soc/{imx => fsl}/phycore-ac97.c              |    0
 sound/soc/{imx => fsl}/wm1133-ev1.c                |    0
 sound/soc/imx/Kconfig                              |   79 --------
 sound/soc/imx/Makefile                             |   22 ---
 28 files changed, 604 insertions(+), 475 deletions(-)

[PATCH v4 01/10] ASoC: fsl: separate SSI and DMA Kconfig options

[Shawn Guo]

The fsl_ssi driver will possibly be shared between Freescale PowerPC
and ARM/IMX families, so give it a separate Kconfig option.  Then
fsl_ssi driver can possibly be selected independently from selecting
PowerPC DMA based PCM driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/fsl/Kconfig  |   15 +++++++++------
 sound/soc/fsl/Makefile |    3 ++-
 2 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index d754d34..ca693b2 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -1,10 +1,11 @@
 config SND_MPC52xx_DMA
 	tristate
 
-# ASoC platform support for the Freescale PowerPC SOCs that have an SSI and
-# an Elo DMA controller, such as the MPC8610 and P1022.  You will still need to
-# select a platform driver and a codec driver.
-config SND_SOC_POWERPC_SSI
+config SND_SOC_FSL_SSI
+	tristate
+	depends on FSL_SOC
+
+config SND_SOC_POWERPC_DMA
 	tristate
 	depends on FSL_SOC
 
@@ -12,7 +13,8 @@ config SND_SOC_MPC8610_HPCD
 	tristate "ALSA SoC support for the Freescale MPC8610 HPCD board"
 	# I2C is necessary for the CS4270 driver
 	depends on MPC8610_HPCD && I2C
-	select SND_SOC_POWERPC_SSI
+	select SND_SOC_FSL_SSI
+	select SND_SOC_POWERPC_DMA
 	select SND_SOC_CS4270
 	select SND_SOC_CS4270_VD33_ERRATA
 	default y if MPC8610_HPCD
@@ -23,7 +25,8 @@ config SND_SOC_P1022_DS
 	tristate "ALSA SoC support for the Freescale P1022 DS board"
 	# I2C is necessary for the WM8776 driver
 	depends on P1022_DS && I2C
-	select SND_SOC_POWERPC_SSI
+	select SND_SOC_FSL_SSI
+	select SND_SOC_POWERPC_DMA
 	select SND_SOC_WM8776
 	default y if P1022_DS
 	help
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index b4a38c0..95d483f 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -9,7 +9,8 @@ obj-$(CONFIG_SND_SOC_P1022_DS) += snd-soc-p1022-ds.o
 # Freescale PowerPC SSI/DMA Platform Support
 snd-soc-fsl-ssi-objs := fsl_ssi.o
 snd-soc-fsl-dma-objs := fsl_dma.o
-obj-$(CONFIG_SND_SOC_POWERPC_SSI) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o
+obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o
+obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
 
 # MPC5200 Platform Support
 obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o
-- 
1.7.5.4

[PATCH v4 02/10] ASoC: imx: merge sound/soc/imx into sound/soc/fsl

[Shawn Guo]

Freescale PowerPC and ARM/IMX families share the same SSI IP block.
The patch merges sound/soc/imx into sound/soc/fsl, so that the possible
code sharing and consolidation can happen.

This is a plain merge, except that menuconfig SND_POWERPC_SOC is added
in Kconfig for PowerPC platform as a correspondence to SND_IMX_SOC for
IMX platform.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig |    1 +
 arch/powerpc/configs/mpc85xx_defconfig           |    1 +
 arch/powerpc/configs/mpc85xx_smp_defconfig       |    1 +
 sound/soc/Kconfig                                |    1 -
 sound/soc/Makefile                               |    1 -
 sound/soc/fsl/Kconfig                            |   92 ++++++++++++++++++++++
 sound/soc/fsl/Makefile                           |   22 +++++
 sound/soc/{imx => fsl}/eukrea-tlv320.c           |    2 +-
 sound/soc/{imx => fsl}/imx-audmux.c              |    0
 sound/soc/{imx => fsl}/imx-audmux.h              |    0
 sound/soc/{imx => fsl}/imx-pcm-dma-mx2.c         |    0
 sound/soc/{imx => fsl}/imx-pcm-fiq.c             |    0
 sound/soc/{imx => fsl}/imx-pcm.c                 |    0
 sound/soc/{imx => fsl}/imx-pcm.h                 |    0
 sound/soc/{imx => fsl}/imx-ssi.c                 |    2 +-
 sound/soc/{imx => fsl}/imx-ssi.h                 |    0
 sound/soc/{imx => fsl}/mx27vis-aic32x4.c         |    0
 sound/soc/{imx => fsl}/phycore-ac97.c            |    0
 sound/soc/{imx => fsl}/wm1133-ev1.c              |    0
 sound/soc/imx/Kconfig                            |   79 -------------------
 sound/soc/imx/Makefile                           |   22 -----
 21 files changed, 119 insertions(+), 105 deletions(-)
 rename sound/soc/{imx => fsl}/eukrea-tlv320.c (99%)
 rename sound/soc/{imx => fsl}/imx-audmux.c (100%)
 rename sound/soc/{imx => fsl}/imx-audmux.h (100%)
 rename sound/soc/{imx => fsl}/imx-pcm-dma-mx2.c (100%)
 rename sound/soc/{imx => fsl}/imx-pcm-fiq.c (100%)
 rename sound/soc/{imx => fsl}/imx-pcm.c (100%)
 rename sound/soc/{imx => fsl}/imx-pcm.h (100%)
 rename sound/soc/{imx => fsl}/imx-ssi.c (99%)
 rename sound/soc/{imx => fsl}/imx-ssi.h (100%)
 rename sound/soc/{imx => fsl}/mx27vis-aic32x4.c (100%)
 rename sound/soc/{imx => fsl}/phycore-ac97.c (100%)
 rename sound/soc/{imx => fsl}/wm1133-ev1.c (100%)
 delete mode 100644 sound/soc/imx/Kconfig
 delete mode 100644 sound/soc/imx/Makefile

diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 0db9ba0..c09598b 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -100,6 +100,7 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_SOC=y
+CONFIG_SND_POWERPC_SOC=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index f37a2ab..44605f8 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -139,6 +139,7 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_PPC is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
+CONFIG_SND_POWERPC_SOC=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index abdcd31..98e227e 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -141,6 +141,7 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_PPC is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
+CONFIG_SND_POWERPC_SOC=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 91c9855..0f85f6d 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -35,7 +35,6 @@ source "sound/soc/blackfin/Kconfig"
 source "sound/soc/davinci/Kconfig"
 source "sound/soc/ep93xx/Kconfig"
 source "sound/soc/fsl/Kconfig"
-source "sound/soc/imx/Kconfig"
 source "sound/soc/jz4740/Kconfig"
 source "sound/soc/nuc900/Kconfig"
 source "sound/soc/omap/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 2feaf37..363dfd6 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_SND_SOC)	+= blackfin/
 obj-$(CONFIG_SND_SOC)	+= davinci/
 obj-$(CONFIG_SND_SOC)	+= ep93xx/
 obj-$(CONFIG_SND_SOC)	+= fsl/
-obj-$(CONFIG_SND_SOC)   += imx/
 obj-$(CONFIG_SND_SOC)	+= jz4740/
 obj-$(CONFIG_SND_SOC)	+= mid-x86/
 obj-$(CONFIG_SND_SOC)	+= mxs/
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index ca693b2..19856a0 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -1,3 +1,15 @@
+config SND_SOC_FSL_SSI
+	tristate
+
+menuconfig SND_POWERPC_SOC
+	tristate "SoC Audio for Freescale PowerPC CPUs"
+	depends on FSL_SOC
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the PowerPC CPUs.
+
+if SND_POWERPC_SOC
+
 config SND_MPC52xx_DMA
 	tristate
 
@@ -68,3 +80,83 @@ config SND_MPC52xx_SOC_EFIKA
 	help
 	  Say Y if you want to add support for sound on the Efika.
 
+endif # SND_POWERPC_SOC
+
+menuconfig SND_IMX_SOC
+	tristate "SoC Audio for Freescale i.MX CPUs"
+	depends on ARCH_MXC
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the i.MX CPUs.
+
+if SND_IMX_SOC
+
+config SND_SOC_IMX_SSI
+	tristate
+
+config SND_SOC_IMX_PCM
+	tristate
+
+config SND_MXC_SOC_FIQ
+	tristate
+	select FIQ
+	select SND_SOC_IMX_PCM
+
+config SND_MXC_SOC_MX2
+	tristate
+	select SND_SOC_DMAENGINE_PCM
+	select SND_SOC_IMX_PCM
+
+config SND_SOC_IMX_AUDMUX
+	tristate
+
+config SND_MXC_SOC_WM1133_EV1
+	tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
+	depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
+	select SND_SOC_WM8350
+	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
+	help
+	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
+	  PMIC board with WM8835x fitted.
+
+config SND_SOC_MX27VIS_AIC32X4
+	tristate "SoC audio support for Visstrim M10 boards"
+	depends on MACH_IMX27_VISSTRIM_M10 && I2C
+	select SND_SOC_TLV320AIC32X4
+	select SND_MXC_SOC_MX2
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
+	help
+	  Say Y if you want to add support for SoC audio on Visstrim SM10
+	  board with TLV320AIC32X4 codec.
+
+config SND_SOC_PHYCORE_AC97
+	tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
+	depends on MACH_PCM043 || MACH_PCA100
+	select SND_SOC_AC97_BUS
+	select SND_SOC_WM9712
+	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
+	help
+	  Say Y if you want to add support for SoC audio on Phytec phyCORE
+	  and phyCARD boards in AC97 mode
+
+config SND_SOC_EUKREA_TLV320
+	tristate "Eukrea TLV320"
+	depends on MACH_EUKREA_MBIMX27_BASEBOARD \
+		|| MACH_EUKREA_MBIMXSD25_BASEBOARD \
+		|| MACH_EUKREA_MBIMXSD35_BASEBOARD \
+		|| MACH_EUKREA_MBIMXSD51_BASEBOARD
+	depends on I2C
+	select SND_SOC_TLV320AIC23
+	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_IMX_SSI
+	help
+	  Enable I2S based access to the TLV320AIC23B codec attached
+	  to the SSI interface
+
+endif # SND_IMX_SOC
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index 95d483f..36c257f 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -21,3 +21,25 @@ obj-$(CONFIG_SND_SOC_MPC5200_AC97) += mpc5200_psc_ac97.o
 obj-$(CONFIG_SND_MPC52xx_SOC_PCM030) += pcm030-audio-fabric.o
 obj-$(CONFIG_SND_MPC52xx_SOC_EFIKA) += efika-audio-fabric.o
 
+# i.MX Platform Support
+snd-soc-imx-ssi-objs := imx-ssi.o
+snd-soc-imx-audmux-objs := imx-audmux.o
+
+obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
+obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
+
+obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
+snd-soc-imx-pcm-y := imx-pcm.o
+snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
+snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
+
+# i.MX Machine Support
+snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
+snd-soc-phycore-ac97-objs := phycore-ac97.o
+snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
+snd-soc-wm1133-ev1-objs := wm1133-ev1.o
+
+obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
+obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
+obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
+obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/fsl/eukrea-tlv320.c
similarity index 99%
rename from sound/soc/imx/eukrea-tlv320.c
rename to sound/soc/fsl/eukrea-tlv320.c
index 7d4475c..efb9ede 100644
--- a/sound/soc/imx/eukrea-tlv320.c
+++ b/sound/soc/fsl/eukrea-tlv320.c
@@ -7,7 +7,7 @@
  * which is Copyright 2009 Simtec Electronics
  * and on sound/soc/imx/phycore-ac97.c which is
  * Copyright 2009 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- * 
+ *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
diff --git a/sound/soc/imx/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
similarity index 100%
rename from sound/soc/imx/imx-audmux.c
rename to sound/soc/fsl/imx-audmux.c
diff --git a/sound/soc/imx/imx-audmux.h b/sound/soc/fsl/imx-audmux.h
similarity index 100%
rename from sound/soc/imx/imx-audmux.h
rename to sound/soc/fsl/imx-audmux.h
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/fsl/imx-pcm-dma-mx2.c
similarity index 100%
rename from sound/soc/imx/imx-pcm-dma-mx2.c
rename to sound/soc/fsl/imx-pcm-dma-mx2.c
diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c
similarity index 100%
rename from sound/soc/imx/imx-pcm-fiq.c
rename to sound/soc/fsl/imx-pcm-fiq.c
diff --git a/sound/soc/imx/imx-pcm.c b/sound/soc/fsl/imx-pcm.c
similarity index 100%
rename from sound/soc/imx/imx-pcm.c
rename to sound/soc/fsl/imx-pcm.c
diff --git a/sound/soc/imx/imx-pcm.h b/sound/soc/fsl/imx-pcm.h
similarity index 100%
rename from sound/soc/imx/imx-pcm.h
rename to sound/soc/fsl/imx-pcm.h
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/fsl/imx-ssi.c
similarity index 99%
rename from sound/soc/imx/imx-ssi.c
rename to sound/soc/fsl/imx-ssi.c
index 4f81ed4..cf3ed03 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/fsl/imx-ssi.c
@@ -28,7 +28,7 @@
  * value. When we read the same register two times (and the register still
  * contains the same value) these status bits are not set. We work
  * around this by not polling these bits but only wait a fixed delay.
- * 
+ *
  */
 
 #include <linux/clk.h>
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/fsl/imx-ssi.h
similarity index 100%
rename from sound/soc/imx/imx-ssi.h
rename to sound/soc/fsl/imx-ssi.h
diff --git a/sound/soc/imx/mx27vis-aic32x4.c b/sound/soc/fsl/mx27vis-aic32x4.c
similarity index 100%
rename from sound/soc/imx/mx27vis-aic32x4.c
rename to sound/soc/fsl/mx27vis-aic32x4.c
diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/fsl/phycore-ac97.c
similarity index 100%
rename from sound/soc/imx/phycore-ac97.c
rename to sound/soc/fsl/phycore-ac97.c
diff --git a/sound/soc/imx/wm1133-ev1.c b/sound/soc/fsl/wm1133-ev1.c
similarity index 100%
rename from sound/soc/imx/wm1133-ev1.c
rename to sound/soc/fsl/wm1133-ev1.c
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
deleted file mode 100644
index 810acaa..0000000
--- a/sound/soc/imx/Kconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-menuconfig SND_IMX_SOC
-	tristate "SoC Audio for Freescale i.MX CPUs"
-	depends on ARCH_MXC
-	help
-	  Say Y or M if you want to add support for codecs attached to
-	  the i.MX SSI interface.
-
-
-if SND_IMX_SOC
-
-config SND_SOC_IMX_SSI
-	tristate
-
-config SND_SOC_IMX_PCM
-	tristate
-
-config SND_MXC_SOC_FIQ
-	tristate
-	select FIQ
-	select SND_SOC_IMX_PCM
-
-config SND_MXC_SOC_MX2
-	select SND_SOC_DMAENGINE_PCM
-	tristate
-	select SND_SOC_IMX_PCM
-
-config SND_SOC_IMX_AUDMUX
-	tristate
-
-config SND_MXC_SOC_WM1133_EV1
-	tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
-	depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
-	select SND_SOC_WM8350
-	select SND_MXC_SOC_FIQ
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
-	  PMIC board with WM8835x fitted.
-
-config SND_SOC_MX27VIS_AIC32X4
-	tristate "SoC audio support for Visstrim M10 boards"
-	depends on MACH_IMX27_VISSTRIM_M10 && I2C
-	select SND_SOC_TLV320AIC32X4
-	select SND_MXC_SOC_MX2
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Say Y if you want to add support for SoC audio on Visstrim SM10
-	  board with TLV320AIC32X4 codec.
-
-config SND_SOC_PHYCORE_AC97
-	tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
-	depends on MACH_PCM043 || MACH_PCA100
-	select SND_SOC_AC97_BUS
-	select SND_SOC_WM9712
-	select SND_MXC_SOC_FIQ
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Say Y if you want to add support for SoC audio on Phytec phyCORE
-	  and phyCARD boards in AC97 mode
-
-config SND_SOC_EUKREA_TLV320
-	tristate "Eukrea TLV320"
-	depends on MACH_EUKREA_MBIMX27_BASEBOARD \
-		|| MACH_EUKREA_MBIMXSD25_BASEBOARD \
-		|| MACH_EUKREA_MBIMXSD35_BASEBOARD \
-		|| MACH_EUKREA_MBIMXSD51_BASEBOARD
-	depends on I2C
-	select SND_SOC_TLV320AIC23
-	select SND_MXC_SOC_FIQ
-	select SND_SOC_IMX_AUDMUX
-	select SND_SOC_IMX_SSI
-	help
-	  Enable I2S based access to the TLV320AIC23B codec attached
-	  to the SSI interface
-
-endif	# SND_IMX_SOC
diff --git a/sound/soc/imx/Makefile b/sound/soc/imx/Makefile
deleted file mode 100644
index f5db3e9..0000000
--- a/sound/soc/imx/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-# i.MX Platform Support
-snd-soc-imx-ssi-objs := imx-ssi.o
-snd-soc-imx-audmux-objs := imx-audmux.o
-
-obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
-obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
-
-obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
-snd-soc-imx-pcm-y := imx-pcm.o
-snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
-snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
-
-# i.MX Machine Support
-snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
-snd-soc-phycore-ac97-objs := phycore-ac97.o
-snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
-snd-soc-wm1133-ev1-objs := wm1133-ev1.o
-
-obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
-obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
-obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
-obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
-- 
1.7.5.4

[PATCH v4 03/10] ASoC: fsl: rename imx-pcm Kconfig options and filename

[Shawn Guo]

Rename a couple of imx-pcm Kconfig options and filename to get them
well named and less confusing.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/fsl/Kconfig                              |   12 ++++++------
 sound/soc/fsl/Makefile                             |    4 ++--
 sound/soc/fsl/{imx-pcm-dma-mx2.c => imx-pcm-dma.c} |    0
 3 files changed, 8 insertions(+), 8 deletions(-)
 rename sound/soc/fsl/{imx-pcm-dma-mx2.c => imx-pcm-dma.c} (100%)

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 19856a0..e3f7509 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -97,12 +97,12 @@ config SND_SOC_IMX_SSI
 config SND_SOC_IMX_PCM
 	tristate
 
-config SND_MXC_SOC_FIQ
+config SND_SOC_IMX_PCM_FIQ
 	tristate
 	select FIQ
 	select SND_SOC_IMX_PCM
 
-config SND_MXC_SOC_MX2
+config SND_SOC_IMX_PCM_DMA
 	tristate
 	select SND_SOC_DMAENGINE_PCM
 	select SND_SOC_IMX_PCM
@@ -114,7 +114,7 @@ config SND_MXC_SOC_WM1133_EV1
 	tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
 	depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
 	select SND_SOC_WM8350
-	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_PCM_FIQ
 	select SND_SOC_IMX_AUDMUX
 	select SND_SOC_IMX_SSI
 	help
@@ -125,7 +125,7 @@ config SND_SOC_MX27VIS_AIC32X4
 	tristate "SoC audio support for Visstrim M10 boards"
 	depends on MACH_IMX27_VISSTRIM_M10 && I2C
 	select SND_SOC_TLV320AIC32X4
-	select SND_MXC_SOC_MX2
+	select SND_SOC_IMX_PCM_DMA
 	select SND_SOC_IMX_AUDMUX
 	select SND_SOC_IMX_SSI
 	help
@@ -137,7 +137,7 @@ config SND_SOC_PHYCORE_AC97
 	depends on MACH_PCM043 || MACH_PCA100
 	select SND_SOC_AC97_BUS
 	select SND_SOC_WM9712
-	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_PCM_FIQ
 	select SND_SOC_IMX_AUDMUX
 	select SND_SOC_IMX_SSI
 	help
@@ -152,7 +152,7 @@ config SND_SOC_EUKREA_TLV320
 		|| MACH_EUKREA_MBIMXSD51_BASEBOARD
 	depends on I2C
 	select SND_SOC_TLV320AIC23
-	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_PCM_FIQ
 	select SND_SOC_IMX_AUDMUX
 	select SND_SOC_IMX_SSI
 	help
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index 36c257f..f031409 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -30,8 +30,8 @@ obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
 
 obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
 snd-soc-imx-pcm-y := imx-pcm.o
-snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
-snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
+snd-soc-imx-pcm-$(CONFIG_SND_SOC_IMX_PCM_FIQ) += imx-pcm-fiq.o
+snd-soc-imx-pcm-$(CONFIG_SND_SOC_IMX_PCM_DMA) += imx-pcm-dma.o
 
 # i.MX Machine Support
 snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
diff --git a/sound/soc/fsl/imx-pcm-dma-mx2.c b/sound/soc/fsl/imx-pcm-dma.c
similarity index 100%
rename from sound/soc/fsl/imx-pcm-dma-mx2.c
rename to sound/soc/fsl/imx-pcm-dma.c
-- 
1.7.5.4

[PATCH v4 04/10] ASoC: fsl: create fsl_utils to accommodate the common functions

[Shawn Guo]

There is some amount of code duplication between mpc8610_hpcd and
p1022_ds machine drivers, and the same code will be duplicated again
when another new machine driver is added.  The patch creates fsl_utils
to accommodate the common functions to stop the code duplication.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/fsl/Kconfig        |    5 ++
 sound/soc/fsl/Makefile       |    2 +
 sound/soc/fsl/fsl_utils.c    |  135 ++++++++++++++++++++++++++++++++++++
 sound/soc/fsl/fsl_utils.h    |   27 +++++++
 sound/soc/fsl/mpc8610_hpcd.c |  157 +++---------------------------------------
 sound/soc/fsl/p1022_ds.c     |  149 +++-------------------------------------
 6 files changed, 189 insertions(+), 286 deletions(-)
 create mode 100644 sound/soc/fsl/fsl_utils.c
 create mode 100644 sound/soc/fsl/fsl_utils.h

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index e3f7509..535ee73 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -1,6 +1,9 @@
 config SND_SOC_FSL_SSI
 	tristate
 
+config SND_SOC_FSL_UTILS
+	tristate
+
 menuconfig SND_POWERPC_SOC
 	tristate "SoC Audio for Freescale PowerPC CPUs"
 	depends on FSL_SOC
@@ -26,6 +29,7 @@ config SND_SOC_MPC8610_HPCD
 	# I2C is necessary for the CS4270 driver
 	depends on MPC8610_HPCD && I2C
 	select SND_SOC_FSL_SSI
+	select SND_SOC_FSL_UTILS
 	select SND_SOC_POWERPC_DMA
 	select SND_SOC_CS4270
 	select SND_SOC_CS4270_VD33_ERRATA
@@ -38,6 +42,7 @@ config SND_SOC_P1022_DS
 	# I2C is necessary for the WM8776 driver
 	depends on P1022_DS && I2C
 	select SND_SOC_FSL_SSI
+	select SND_SOC_FSL_UTILS
 	select SND_SOC_POWERPC_DMA
 	select SND_SOC_WM8776
 	default y if P1022_DS
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index f031409..fbdbed0 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -8,8 +8,10 @@ obj-$(CONFIG_SND_SOC_P1022_DS) += snd-soc-p1022-ds.o
 
 # Freescale PowerPC SSI/DMA Platform Support
 snd-soc-fsl-ssi-objs := fsl_ssi.o
+snd-soc-fsl-utils-objs := fsl_utils.o
 snd-soc-fsl-dma-objs := fsl_dma.o
 obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o
+obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o
 obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
 
 # MPC5200 Platform Support
diff --git a/sound/soc/fsl/fsl_utils.c b/sound/soc/fsl/fsl_utils.c
new file mode 100644
index 0000000..4370c28
--- /dev/null
+++ b/sound/soc/fsl/fsl_utils.c
@@ -0,0 +1,135 @@
+/**
+ * Freescale ALSA SoC Machine driver utility
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_i2c.h>
+#include <sound/soc.h>
+
+#include "fsl_utils.h"
+
+/**
+ * fsl_asoc_get_codec_dev_name - determine the dev_name for a codec node
+ *
+ * @np: pointer to the I2C device tree node
+ * @buf: buffer to be filled with the dev_name of the I2C device
+ * @len: the length of the buffer
+ *
+ * This function determines the dev_name for an I2C node.  This is the name
+ * that would be returned by dev_name() if this device_node were part of a
+ * 'struct device'  It's ugly and hackish, but it works.
+ *
+ * The dev_name for such devices include the bus number and I2C address. For
+ * example, "cs4270.0-004f".
+ */
+int fsl_asoc_get_codec_dev_name(struct device_node *np, char *buf, size_t len)
+{
+	const u32 *iprop;
+	u32 addr;
+	char temp[DAI_NAME_SIZE];
+	struct i2c_client *i2c;
+
+	of_modalias_node(np, temp, DAI_NAME_SIZE);
+
+	iprop = of_get_property(np, "reg", NULL);
+	if (!iprop)
+		return -EINVAL;
+
+	addr = be32_to_cpup(iprop);
+
+	/* We need the adapter number */
+	i2c = of_find_i2c_device_by_node(np);
+	if (!i2c) {
+		put_device(&i2c->dev);
+		return -ENODEV;
+	}
+
+	snprintf(buf, len, "%s.%u-%04x", temp, i2c->adapter->nr, addr);
+	put_device(&i2c->dev);
+
+	return 0;
+}
+EXPORT_SYMBOL(fsl_asoc_get_codec_dev_name);
+
+/**
+ * fsl_asoc_get_dma_channel - determine the dma channel for a SSI node
+ *
+ * @ssi_np: pointer to the SSI device tree node
+ * @name: name of the phandle pointing to the dma channel
+ * @dai: ASoC DAI link pointer to be filled with platform_name
+ * @dma_channel_id: dma channel id to be returned
+ * @dma_id: dma id to be returned
+ *
+ * This function determines the dma and channel id for given SSI node.  It
+ * also discovers the platform_name for the ASoC DAI link.
+ */
+int fsl_asoc_get_dma_channel(struct device_node *ssi_np,
+			     const char *name,
+			     struct snd_soc_dai_link *dai,
+			     unsigned int *dma_channel_id,
+			     unsigned int *dma_id)
+{
+	struct resource res;
+	struct device_node *dma_channel_np, *dma_np;
+	const u32 *iprop;
+	int ret;
+
+	dma_channel_np = of_parse_phandle(ssi_np, name, 0);
+	if (!dma_channel_np)
+		return -EINVAL;
+
+	if (!of_device_is_compatible(dma_channel_np, "fsl,ssi-dma-channel")) {
+		of_node_put(dma_channel_np);
+		return -EINVAL;
+	}
+
+	/* Determine the dev_name for the device_node.  This code mimics the
+	 * behavior of of_device_make_bus_id(). We need this because ASoC uses
+	 * the dev_name() of the device to match the platform (DMA) device with
+	 * the CPU (SSI) device.  It's all ugly and hackish, but it works (for
+	 * now).
+	 *
+	 * dai->platform name should already point to an allocated buffer.
+	 */
+	ret = of_address_to_resource(dma_channel_np, 0, &res);
+	if (ret) {
+		of_node_put(dma_channel_np);
+		return ret;
+	}
+	snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s",
+		 (unsigned long long) res.start, dma_channel_np->name);
+
+	iprop = of_get_property(dma_channel_np, "cell-index", NULL);
+	if (!iprop) {
+		of_node_put(dma_channel_np);
+		return -EINVAL;
+	}
+	*dma_channel_id = be32_to_cpup(iprop);
+
+	dma_np = of_get_parent(dma_channel_np);
+	iprop = of_get_property(dma_np, "cell-index", NULL);
+	if (!iprop) {
+		of_node_put(dma_np);
+		return -EINVAL;
+	}
+	*dma_id = be32_to_cpup(iprop);
+
+	of_node_put(dma_np);
+	of_node_put(dma_channel_np);
+
+	return 0;
+}
+EXPORT_SYMBOL(fsl_asoc_get_dma_channel);
+
+MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
+MODULE_DESCRIPTION("Freescale ASoC utility code");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/fsl/fsl_utils.h b/sound/soc/fsl/fsl_utils.h
new file mode 100644
index 0000000..44d1436
--- /dev/null
+++ b/sound/soc/fsl/fsl_utils.h
@@ -0,0 +1,27 @@
+/**
+ * Freescale ALSA SoC Machine driver utility
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef _FSL_UTILS_H
+#define _FSL_UTILS_H
+
+#define DAI_NAME_SIZE	32
+
+struct snd_soc_dai_link;
+struct device_node;
+
+int fsl_asoc_get_codec_dev_name(struct device_node *np, char *buf, size_t len);
+int fsl_asoc_get_dma_channel(struct device_node *ssi_np, const char *name,
+			     struct snd_soc_dai_link *dai,
+			     unsigned int *dma_channel_id,
+			     unsigned int *dma_id);
+
+#endif /* _FSL_UTILS_H */
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index fcf9302..7ead1e5 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -14,18 +14,16 @@
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
-#include <linux/of_i2c.h>
 #include <sound/soc.h>
 #include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"
+#include "fsl_utils.h"
 
 /* There's only one global utilities register */
 static phys_addr_t guts_phys;
 
-#define DAI_NAME_SIZE	32
-
 /**
  * mpc8610_hpcd_data: machine-specific ASoC device data
  *
@@ -181,141 +179,6 @@ static struct snd_soc_ops mpc8610_hpcd_ops = {
 };
 
 /**
- * get_node_by_phandle_name - get a node by its phandle name
- *
- * This function takes a node, the name of a property in that node, and a
- * compatible string.  Assuming the property is a phandle to another node,
- * it returns that node, (optionally) if that node is compatible.
- *
- * If the property is not a phandle, or the node it points to is not compatible
- * with the specific string, then NULL is returned.
- */
-static struct device_node *get_node_by_phandle_name(struct device_node *np,
-					       const char *name,
-					       const char *compatible)
-{
-	const phandle *ph;
-	int len;
-
-	ph = of_get_property(np, name, &len);
-	if (!ph || (len != sizeof(phandle)))
-		return NULL;
-
-	np = of_find_node_by_phandle(*ph);
-	if (!np)
-		return NULL;
-
-	if (compatible && !of_device_is_compatible(np, compatible)) {
-		of_node_put(np);
-		return NULL;
-	}
-
-	return np;
-}
-
-/**
- * get_parent_cell_index -- return the cell-index of the parent of a node
- *
- * Return the value of the cell-index property of the parent of the given
- * node.  This is used for DMA channel nodes that need to know the DMA ID
- * of the controller they are on.
- */
-static int get_parent_cell_index(struct device_node *np)
-{
-	struct device_node *parent = of_get_parent(np);
-	const u32 *iprop;
-
-	if (!parent)
-		return -1;
-
-	iprop = of_get_property(parent, "cell-index", NULL);
-	of_node_put(parent);
-
-	if (!iprop)
-		return -1;
-
-	return be32_to_cpup(iprop);
-}
-
-/**
- * codec_node_dev_name - determine the dev_name for a codec node
- *
- * This function determines the dev_name for an I2C node.  This is the name
- * that would be returned by dev_name() if this device_node were part of a
- * 'struct device'  It's ugly and hackish, but it works.
- *
- * The dev_name for such devices include the bus number and I2C address. For
- * example, "cs4270.0-004f".
- */
-static int codec_node_dev_name(struct device_node *np, char *buf, size_t len)
-{
-	const u32 *iprop;
-	int addr;
-	char temp[DAI_NAME_SIZE];
-	struct i2c_client *i2c;
-
-	of_modalias_node(np, temp, DAI_NAME_SIZE);
-
-	iprop = of_get_property(np, "reg", NULL);
-	if (!iprop)
-		return -EINVAL;
-
-	addr = be32_to_cpup(iprop);
-
-	/* We need the adapter number */
-	i2c = of_find_i2c_device_by_node(np);
-	if (!i2c)
-		return -ENODEV;
-
-	snprintf(buf, len, "%s.%u-%04x", temp, i2c->adapter->nr, addr);
-
-	return 0;
-}
-
-static int get_dma_channel(struct device_node *ssi_np,
-			   const char *name,
-			   struct snd_soc_dai_link *dai,
-			   unsigned int *dma_channel_id,
-			   unsigned int *dma_id)
-{
-	struct resource res;
-	struct device_node *dma_channel_np;
-	const u32 *iprop;
-	int ret;
-
-	dma_channel_np = get_node_by_phandle_name(ssi_np, name,
-						  "fsl,ssi-dma-channel");
-	if (!dma_channel_np)
-		return -EINVAL;
-
-	/* Determine the dev_name for the device_node.  This code mimics the
-	 * behavior of of_device_make_bus_id(). We need this because ASoC uses
-	 * the dev_name() of the device to match the platform (DMA) device with
-	 * the CPU (SSI) device.  It's all ugly and hackish, but it works (for
-	 * now).
-	 *
-	 * dai->platform name should already point to an allocated buffer.
-	 */
-	ret = of_address_to_resource(dma_channel_np, 0, &res);
-	if (ret)
-		return ret;
-	snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s",
-		 (unsigned long long) res.start, dma_channel_np->name);
-
-	iprop = of_get_property(dma_channel_np, "cell-index", NULL);
-	if (!iprop) {
-		of_node_put(dma_channel_np);
-		return -EINVAL;
-	}
-
-	*dma_channel_id = be32_to_cpup(iprop);
-	*dma_id = get_parent_cell_index(dma_channel_np);
-	of_node_put(dma_channel_np);
-
-	return 0;
-}
-
-/**
  * mpc8610_hpcd_probe: platform probe function for the machine driver
  *
  * Although this is a machine driver, the SSI node is the "master" node with
@@ -353,8 +216,8 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev)
 	machine_data->dai[0].ops = &mpc8610_hpcd_ops;
 
 	/* Determine the codec name, it will be used as the codec DAI name */
-	ret = codec_node_dev_name(codec_np, machine_data->codec_name,
-				  DAI_NAME_SIZE);
+	ret = fsl_asoc_get_codec_dev_name(codec_np, machine_data->codec_name,
+					  DAI_NAME_SIZE);
 	if (ret) {
 		dev_err(&pdev->dev, "invalid codec node %s\n",
 			codec_np->full_name);
@@ -458,9 +321,10 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev)
 
 	/* Find the playback DMA channel to use. */
 	machine_data->dai[0].platform_name = machine_data->platform_name[0];
-	ret = get_dma_channel(np, "fsl,playback-dma", &machine_data->dai[0],
-			      &machine_data->dma_channel_id[0],
-			      &machine_data->dma_id[0]);
+	ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma",
+				       &machine_data->dai[0],
+				       &machine_data->dma_channel_id[0],
+				       &machine_data->dma_id[0]);
 	if (ret) {
 		dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n");
 		goto error;
@@ -468,9 +332,10 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev)
 
 	/* Find the capture DMA channel to use. */
 	machine_data->dai[1].platform_name = machine_data->platform_name[1];
-	ret = get_dma_channel(np, "fsl,capture-dma", &machine_data->dai[1],
-			      &machine_data->dma_channel_id[1],
-			      &machine_data->dma_id[1]);
+	ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma",
+				       &machine_data->dai[1],
+				       &machine_data->dma_channel_id[1],
+				       &machine_data->dma_id[1]);
 	if (ret) {
 		dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n");
 		goto error;
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index d32ec46..60f7bb8 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -14,12 +14,12 @@
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
-#include <linux/of_i2c.h>
 #include <sound/soc.h>
 #include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"
+#include "fsl_utils.h"
 
 /* P1022-specific PMUXCR and DMUXCR bit definitions */
 
@@ -57,8 +57,6 @@ static inline void guts_set_dmuxcr(struct ccsr_guts_85xx __iomem *guts,
 /* There's only one global utilities register */
 static phys_addr_t guts_phys;
 
-#define DAI_NAME_SIZE	32
-
 /**
  * machine_data: machine-specific ASoC device data
  *
@@ -191,136 +189,6 @@ static struct snd_soc_ops p1022_ds_ops = {
 };
 
 /**
- * get_node_by_phandle_name - get a node by its phandle name
- *
- * This function takes a node, the name of a property in that node, and a
- * compatible string.  Assuming the property is a phandle to another node,
- * it returns that node, (optionally) if that node is compatible.
- *
- * If the property is not a phandle, or the node it points to is not compatible
- * with the specific string, then NULL is returned.
- */
-static struct device_node *get_node_by_phandle_name(struct device_node *np,
-	const char *name, const char *compatible)
-{
-	np = of_parse_phandle(np, name, 0);
-	if (!np)
-		return NULL;
-
-	if (!of_device_is_compatible(np, compatible)) {
-		of_node_put(np);
-		return NULL;
-	}
-
-	return np;
-}
-
-/**
- * get_parent_cell_index -- return the cell-index of the parent of a node
- *
- * Return the value of the cell-index property of the parent of the given
- * node.  This is used for DMA channel nodes that need to know the DMA ID
- * of the controller they are on.
- */
-static int get_parent_cell_index(struct device_node *np)
-{
-	struct device_node *parent = of_get_parent(np);
-	const u32 *iprop;
-	int ret = -1;
-
-	if (!parent)
-		return -1;
-
-	iprop = of_get_property(parent, "cell-index", NULL);
-	if (iprop)
-		ret = be32_to_cpup(iprop);
-
-	of_node_put(parent);
-
-	return ret;
-}
-
-/**
- * codec_node_dev_name - determine the dev_name for a codec node
- *
- * This function determines the dev_name for an I2C node.  This is the name
- * that would be returned by dev_name() if this device_node were part of a
- * 'struct device'  It's ugly and hackish, but it works.
- *
- * The dev_name for such devices include the bus number and I2C address. For
- * example, "cs4270-codec.0-004f".
- */
-static int codec_node_dev_name(struct device_node *np, char *buf, size_t len)
-{
-	const u32 *iprop;
-	int addr;
-	char temp[DAI_NAME_SIZE];
-	struct i2c_client *i2c;
-
-	of_modalias_node(np, temp, DAI_NAME_SIZE);
-
-	iprop = of_get_property(np, "reg", NULL);
-	if (!iprop)
-		return -EINVAL;
-
-	addr = be32_to_cpup(iprop);
-
-	/* We need the adapter number */
-	i2c = of_find_i2c_device_by_node(np);
-	if (!i2c)
-		return -ENODEV;
-
-	snprintf(buf, len, "%s.%u-%04x", temp, i2c->adapter->nr, addr);
-
-	return 0;
-}
-
-static int get_dma_channel(struct device_node *ssi_np,
-			   const char *name,
-			   struct snd_soc_dai_link *dai,
-			   unsigned int *dma_channel_id,
-			   unsigned int *dma_id)
-{
-	struct resource res;
-	struct device_node *dma_channel_np;
-	const u32 *iprop;
-	int ret;
-
-	dma_channel_np = get_node_by_phandle_name(ssi_np, name,
-						  "fsl,ssi-dma-channel");
-	if (!dma_channel_np)
-		return -EINVAL;
-
-	/* Determine the dev_name for the device_node.  This code mimics the
-	 * behavior of of_device_make_bus_id(). We need this because ASoC uses
-	 * the dev_name() of the device to match the platform (DMA) device with
-	 * the CPU (SSI) device.  It's all ugly and hackish, but it works (for
-	 * now).
-	 *
-	 * dai->platform name should already point to an allocated buffer.
-	 */
-	ret = of_address_to_resource(dma_channel_np, 0, &res);
-	if (ret) {
-		of_node_put(dma_channel_np);
-		return ret;
-	}
-	snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s",
-		 (unsigned long long) res.start, dma_channel_np->name);
-
-	iprop = of_get_property(dma_channel_np, "cell-index", NULL);
-	if (!iprop) {
-		of_node_put(dma_channel_np);
-		return -EINVAL;
-	}
-
-	*dma_channel_id = be32_to_cpup(iprop);
-	*dma_id = get_parent_cell_index(dma_channel_np);
-	of_node_put(dma_channel_np);
-
-	return 0;
-}
-
-/**
  * p1022_ds_probe: platform probe function for the machine driver
  *
  * Although this is a machine driver, the SSI node is the "master" node with
@@ -358,7 +226,8 @@ static int p1022_ds_probe(struct platform_device *pdev)
 	mdata->dai[0].ops = &p1022_ds_ops;
 
 	/* Determine the codec name, it will be used as the codec DAI name */
-	ret = codec_node_dev_name(codec_np, mdata->codec_name, DAI_NAME_SIZE);
+	ret = fsl_asoc_get_codec_dev_name(codec_np, mdata->codec_name,
+					  DAI_NAME_SIZE);
 	if (ret) {
 		dev_err(&pdev->dev, "invalid codec node %s\n",
 			codec_np->full_name);
@@ -454,9 +323,9 @@ static int p1022_ds_probe(struct platform_device *pdev)
 
 	/* Find the playback DMA channel to use. */
 	mdata->dai[0].platform_name = mdata->platform_name[0];
-	ret = get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0],
-			      &mdata->dma_channel_id[0],
-			      &mdata->dma_id[0]);
+	ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0],
+				       &mdata->dma_channel_id[0],
+				       &mdata->dma_id[0]);
 	if (ret) {
 		dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n");
 		goto error;
@@ -464,9 +333,9 @@ static int p1022_ds_probe(struct platform_device *pdev)
 
 	/* Find the capture DMA channel to use. */
 	mdata->dai[1].platform_name = mdata->platform_name[1];
-	ret = get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1],
-			      &mdata->dma_channel_id[1],
-			      &mdata->dma_id[1]);
+	ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1],
+				       &mdata->dma_channel_id[1],
+				       &mdata->dma_id[1]);
 	if (ret) {
 		dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n");
 		goto error;
-- 
1.7.5.4

[PATCH v4 05/10] ASoC: fsl: remove helper fsl_asoc_get_codec_dev_name

[Shawn Guo]

The ASoC core now can support matching codec with device node besides
name, so we can save helper function fsl_asoc_get_codec_dev_name.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/fsl/fsl_utils.c    |   44 ------------------------------------------
 sound/soc/fsl/fsl_utils.h    |    1 -
 sound/soc/fsl/mpc8610_hpcd.c |   13 +----------
 sound/soc/fsl/p1022_ds.c     |   13 +----------
 4 files changed, 4 insertions(+), 67 deletions(-)

diff --git a/sound/soc/fsl/fsl_utils.c b/sound/soc/fsl/fsl_utils.c
index 4370c28..b9e42b5 100644
--- a/sound/soc/fsl/fsl_utils.c
+++ b/sound/soc/fsl/fsl_utils.c
@@ -12,55 +12,11 @@
 
 #include <linux/module.h>
 #include <linux/of_address.h>
-#include <linux/of_i2c.h>
 #include <sound/soc.h>
 
 #include "fsl_utils.h"
 
 /**
- * fsl_asoc_get_codec_dev_name - determine the dev_name for a codec node
- *
- * @np: pointer to the I2C device tree node
- * @buf: buffer to be filled with the dev_name of the I2C device
- * @len: the length of the buffer
- *
- * This function determines the dev_name for an I2C node.  This is the name
- * that would be returned by dev_name() if this device_node were part of a
- * 'struct device'  It's ugly and hackish, but it works.
- *
- * The dev_name for such devices include the bus number and I2C address. For
- * example, "cs4270.0-004f".
- */
-int fsl_asoc_get_codec_dev_name(struct device_node *np, char *buf, size_t len)
-{
-	const u32 *iprop;
-	u32 addr;
-	char temp[DAI_NAME_SIZE];
-	struct i2c_client *i2c;
-
-	of_modalias_node(np, temp, DAI_NAME_SIZE);
-
-	iprop = of_get_property(np, "reg", NULL);
-	if (!iprop)
-		return -EINVAL;
-
-	addr = be32_to_cpup(iprop);
-
-	/* We need the adapter number */
-	i2c = of_find_i2c_device_by_node(np);
-	if (!i2c) {
-		put_device(&i2c->dev);
-		return -ENODEV;
-	}
-
-	snprintf(buf, len, "%s.%u-%04x", temp, i2c->adapter->nr, addr);
-	put_device(&i2c->dev);
-
-	return 0;
-}
-EXPORT_SYMBOL(fsl_asoc_get_codec_dev_name);
-
-/**
  * fsl_asoc_get_dma_channel - determine the dma channel for a SSI node
  *
  * @ssi_np: pointer to the SSI device tree node
diff --git a/sound/soc/fsl/fsl_utils.h b/sound/soc/fsl/fsl_utils.h
index 44d1436..b295112 100644
--- a/sound/soc/fsl/fsl_utils.h
+++ b/sound/soc/fsl/fsl_utils.h
@@ -18,7 +18,6 @@
 struct snd_soc_dai_link;
 struct device_node;
 
-int fsl_asoc_get_codec_dev_name(struct device_node *np, char *buf, size_t len);
 int fsl_asoc_get_dma_channel(struct device_node *ssi_np, const char *name,
 			     struct snd_soc_dai_link *dai,
 			     unsigned int *dma_channel_id,
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 7ead1e5..354b753 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -41,7 +41,6 @@ struct mpc8610_hpcd_data {
 	unsigned int dma_id[2];		/* 0 = DMA1, 1 = DMA2, etc */
 	unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/
 	char codec_dai_name[DAI_NAME_SIZE];
-	char codec_name[DAI_NAME_SIZE];
 	char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */
 };
 
@@ -215,16 +214,8 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev)
 	machine_data->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev);
 	machine_data->dai[0].ops = &mpc8610_hpcd_ops;
 
-	/* Determine the codec name, it will be used as the codec DAI name */
-	ret = fsl_asoc_get_codec_dev_name(codec_np, machine_data->codec_name,
-					  DAI_NAME_SIZE);
-	if (ret) {
-		dev_err(&pdev->dev, "invalid codec node %s\n",
-			codec_np->full_name);
-		ret = -EINVAL;
-		goto error;
-	}
-	machine_data->dai[0].codec_name = machine_data->codec_name;
+	/* ASoC core can match codec with device node */
+	machine_data->dai[0].codec_of_node = codec_np;
 
 	/* The DAI name from the codec (snd_soc_dai_driver.name) */
 	machine_data->dai[0].codec_dai_name = "cs4270-hifi";
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index 60f7bb8..e87cb41 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -73,7 +73,6 @@ struct machine_data {
 	unsigned int ssi_id;		/* 0 = SSI1, 1 = SSI2, etc */
 	unsigned int dma_id[2];		/* 0 = DMA1, 1 = DMA2, etc */
 	unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/
-	char codec_name[DAI_NAME_SIZE];
 	char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */
 };
 
@@ -225,16 +224,8 @@ static int p1022_ds_probe(struct platform_device *pdev)
 	mdata->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev);
 	mdata->dai[0].ops = &p1022_ds_ops;
 
-	/* Determine the codec name, it will be used as the codec DAI name */
-	ret = fsl_asoc_get_codec_dev_name(codec_np, mdata->codec_name,
-					  DAI_NAME_SIZE);
-	if (ret) {
-		dev_err(&pdev->dev, "invalid codec node %s\n",
-			codec_np->full_name);
-		ret = -EINVAL;
-		goto error;
-	}
-	mdata->dai[0].codec_name = mdata->codec_name;
+	/* ASoC core can match codec with device node */
+	mdata->dai[0].codec_of_node = codec_np;
 
 	/* We register two DAIs per SSI, one for playback and the other for
 	 * capture.  We support codecs that have separate DAIs for both playback
-- 
1.7.5.4

[PATCH v4 06/10] ASoC: fsl: check property 'compatible' for the machine name

[Shawn Guo]

Check /compatible rather than /model to determine the machine name.
The p1022ds older device trees get a different /model from the new
ones, while /compatible is consistent there, so checking /compatible
will save the bother of detecting older p1022ds device trees.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/fsl/fsl_ssi.c      |    6 +++---
 sound/soc/fsl/mpc8610_hpcd.c |    2 +-
 sound/soc/fsl/p1022_ds.c     |   32 +++++---------------------------
 3 files changed, 9 insertions(+), 31 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 3e06696..2eb407f 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -716,12 +716,12 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev)
 	}
 
 	/* Trigger the machine driver's probe function.  The platform driver
-	 * name of the machine driver is taken from the /model property of the
+	 * name of the machine driver is taken from /compatible property of the
 	 * device tree.  We also pass the address of the CPU DAI driver
 	 * structure.
 	 */
-	sprop = of_get_property(of_find_node_by_path("/"), "model", NULL);
-	/* Sometimes the model name has a "fsl," prefix, so we strip that. */
+	sprop = of_get_property(of_find_node_by_path("/"), "compatible", NULL);
+	/* Sometimes the compatible name has a "fsl," prefix, so we strip it. */
 	p = strrchr(sprop, ',');
 	if (p)
 		sprop = p + 1;
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 354b753..8fdc430 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -402,7 +402,7 @@ static struct platform_driver mpc8610_hpcd_driver = {
 	.probe = mpc8610_hpcd_probe,
 	.remove = __devexit_p(mpc8610_hpcd_remove),
 	.driver = {
-		/* The name must match the 'model' property in the device tree,
+		/* The name must match 'compatible' property in the device tree,
 		 * in lowercase letters.
 		 */
 		.name = "snd-soc-mpc8610hpcd",
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index e87cb41..0f42f31 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -403,6 +403,11 @@ static struct platform_driver p1022_ds_driver = {
 	.probe = p1022_ds_probe,
 	.remove = __devexit_p(p1022_ds_remove),
 	.driver = {
+		/*
+		 * The name must match 'compatible' property in the device tree,
+		 * in lowercase letters.
+		 */
+		.name = "snd-soc-p1022ds",
 		.owner = THIS_MODULE,
 	},
 };
@@ -416,33 +421,6 @@ static int __init p1022_ds_init(void)
 {
 	struct device_node *guts_np;
 	struct resource res;
-	const char *sprop;
-
-	/*
-	 * Check if we're actually running on a P1022DS.  Older device trees
-	 * have a model of "fsl,P1022" and newer ones use "fsl,P1022DS", so we
-	 * need to support both.  The SSI driver uses that property to link to
-	 * the machine driver, so have to match it.
-	 */
-	sprop = of_get_property(of_find_node_by_path("/"), "model", NULL);
-	if (!sprop) {
-		pr_err("snd-soc-p1022ds: missing /model node");
-		return -ENODEV;
-	}
-
-	pr_debug("snd-soc-p1022ds: board model name is %s\n", sprop);
-
-	/*
-	 * The name of this board, taken from the device tree.  Normally, this is a*
-	 * fixed string, but some P1022DS device trees have a /model property of
-	 * "fsl,P1022", and others have "fsl,P1022DS".
-	 */
-	if (strcasecmp(sprop, "fsl,p1022ds") == 0)
-		p1022_ds_driver.driver.name = "snd-soc-p1022ds";
-	else if (strcasecmp(sprop, "fsl,p1022") == 0)
-		p1022_ds_driver.driver.name = "snd-soc-p1022";
-	else
-		return -ENODEV;
 
 	/* Get the physical address of the global utilities registers */
 	guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
-- 
1.7.5.4

[PATCH v4 07/10] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX

[Shawn Guo]

Provide different pair of accessors for accessing SSI registers on
PowerPC and ARM/IMX, so that fsl_ssi driver can be built on both
architectures.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/fsl/fsl_ssi.c |   64 ++++++++++++++++++++++++++++++----------------
 1 files changed, 42 insertions(+), 22 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 2eb407f..db9a734 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -11,11 +11,14 @@
  */
 
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <sound/core.h>
@@ -26,6 +29,25 @@
 
 #include "fsl_ssi.h"
 
+#ifdef PPC
+#define read_ssi(addr)			 in_be32(addr)
+#define write_ssi(val, addr)		 out_be32(addr, val)
+#define write_ssi_mask(addr, clear, set) clrsetbits_be32(addr, clear, set)
+#elif defined ARM
+#define read_ssi(addr)			 readl(addr)
+#define write_ssi(val, addr)		 writel(val, addr)
+/*
+ * FIXME: Proper locking should be added at write_ssi_mask caller level
+ * to ensure this register read/modify/write sequence is race free.
+ */
+static inline void write_ssi_mask(u32 __iomem *addr, u32 clear, u32 set)
+{
+	u32 val = readl(addr);
+	val = (val & ~clear) | set;
+	writel(val, addr);
+}
+#endif
+
 /**
  * FSLSSI_I2S_RATES: sample rates supported by the I2S
  *
@@ -145,7 +167,7 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
 	   were interrupted for.  We mask it with the Interrupt Enable register
 	   so that we only check for events that we're interested in.
 	 */
-	sisr = in_be32(&ssi->sisr) & SIER_FLAGS;
+	sisr = read_ssi(&ssi->sisr) & SIER_FLAGS;
 
 	if (sisr & CCSR_SSI_SISR_RFRC) {
 		ssi_private->stats.rfrc++;
@@ -260,7 +282,7 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
 
 	/* Clear the bits that we set */
 	if (sisr2)
-		out_be32(&ssi->sisr, sisr2);
+		write_ssi(sisr2, &ssi->sisr);
 
 	return ret;
 }
@@ -295,7 +317,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 		 * SSI needs to be disabled before updating the registers we set
 		 * here.
 		 */
-		clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+		write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
 
 		/*
 		 * Program the SSI into I2S Slave Non-Network Synchronous mode.
@@ -303,20 +325,18 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 		 *
 		 * FIXME: Little-endian samples require a different shift dir
 		 */
-		clrsetbits_be32(&ssi->scr,
+		write_ssi_mask(&ssi->scr,
 			CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN,
 			CCSR_SSI_SCR_TFR_CLK_DIS | CCSR_SSI_SCR_I2S_MODE_SLAVE
 			| (synchronous ? CCSR_SSI_SCR_SYN : 0));
 
-		out_be32(&ssi->stcr,
-			 CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
+		write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
 			 CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS |
-			 CCSR_SSI_STCR_TSCKP);
+			 CCSR_SSI_STCR_TSCKP, &ssi->stcr);
 
-		out_be32(&ssi->srcr,
-			 CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 |
+		write_ssi(CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 |
 			 CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS |
-			 CCSR_SSI_SRCR_RSCKP);
+			 CCSR_SSI_SRCR_RSCKP, &ssi->srcr);
 
 		/*
 		 * The DC and PM bits are only used if the SSI is the clock
@@ -324,7 +344,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 		 */
 
 		/* Enable the interrupts and DMA requests */
-		out_be32(&ssi->sier, SIER_FLAGS);
+		write_ssi(SIER_FLAGS, &ssi->sier);
 
 		/*
 		 * Set the watermark for transmit FIFI 0 and receive FIFO 0. We
@@ -339,9 +359,9 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 		 * make this value larger (and maybe we should), but this way
 		 * data will be written to memory as soon as it's available.
 		 */
-		out_be32(&ssi->sfcsr,
-			CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) |
-			CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2));
+		write_ssi(CCSR_SSI_SFCSR_TFWM0(ssi_private->fifo_depth - 2) |
+			CCSR_SSI_SFCSR_RFWM0(ssi_private->fifo_depth - 2),
+			&ssi->sfcsr);
 
 		/*
 		 * We keep the SSI disabled because if we enable it, then the
@@ -417,7 +437,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 	unsigned int sample_size =
 		snd_pcm_format_width(params_format(hw_params));
 	u32 wl = CCSR_SSI_SxCCR_WL(sample_size);
-	int enabled = in_be32(&ssi->scr) & CCSR_SSI_SCR_SSIEN;
+	int enabled = read_ssi(&ssi->scr) & CCSR_SSI_SCR_SSIEN;
 
 	/*
 	 * If we're in synchronous mode, and the SSI is already enabled,
@@ -439,9 +459,9 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 	/* In synchronous mode, the SSI uses STCCR for capture */
 	if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ||
 	    ssi_private->cpu_dai_drv.symmetric_rates)
-		clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl);
+		write_ssi_mask(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl);
 	else
-		clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
+		write_ssi_mask(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
 
 	return 0;
 }
@@ -466,19 +486,19 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			setbits32(&ssi->scr,
+			write_ssi_mask(&ssi->scr, 0,
 				CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE);
 		else
-			setbits32(&ssi->scr,
+			write_ssi_mask(&ssi->scr, 0,
 				CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE);
 		break;
 
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			clrbits32(&ssi->scr, CCSR_SSI_SCR_TE);
+			write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_TE, 0);
 		else
-			clrbits32(&ssi->scr, CCSR_SSI_SCR_RE);
+			write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_RE, 0);
 		break;
 
 	default:
@@ -510,7 +530,7 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
 	if (!ssi_private->first_stream) {
 		struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
 
-		clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+		write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_SSIEN, 0);
 	}
 }
 
-- 
1.7.5.4

[PATCH v4 08/10] ASoC: fsl: remove the fatal error checking on codec-handle

[Shawn Guo]

As Documentation/devicetree/bindings/powerpc/fsl/ssi.txt documented,
codec-handle is an optional property, so missing it should not be a
fatal error.

More importantly, the imx machine drivers to be added working with
fsl_ssi will not have this property, as they use new ASoC machine
driver binding mechanism.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/fsl/fsl_ssi.c |    6 ------
 1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index db9a734..0192c02 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -642,12 +642,6 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev)
 	if (!of_device_is_available(np))
 		return -ENODEV;
 
-	/* Check for a codec-handle property. */
-	if (!of_get_property(np, "codec-handle", NULL)) {
-		dev_err(&pdev->dev, "missing codec-handle property\n");
-		return -ENODEV;
-	}
-
 	/* We only support the SSI in "I2S Slave" mode */
 	sprop = of_get_property(np, "fsl,mode", NULL);
 	if (!sprop || strcmp(sprop, "i2s-slave")) {
-- 
1.7.5.4

[PATCH v4 09/10] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers

[Shawn Guo]

Makes necessary changes on fsl_ssi to let it work with imx pcm and
machine drivers.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/fsl/fsl_ssi.c |   64 +++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 64 insertions(+), 0 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 0192c02..3cf23e5 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -28,6 +28,7 @@
 #include <sound/soc.h>
 
 #include "fsl_ssi.h"
+#include "imx-pcm.h"
 
 #ifdef PPC
 #define read_ssi(addr)			 in_be32(addr)
@@ -116,6 +117,11 @@ struct fsl_ssi_private {
 	struct device_attribute dev_attr;
 	struct platform_device *pdev;
 
+	int ssi_on_imx;
+	struct platform_device *imx_pcm_pdev;
+	struct imx_pcm_dma_params dma_params_tx;
+	struct imx_pcm_dma_params dma_params_rx;
+
 	struct {
 		unsigned int rfrc;
 		unsigned int tfrc;
@@ -413,6 +419,12 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 		ssi_private->second_stream = substream;
 	}
 
+	if (ssi_private->ssi_on_imx)
+		snd_soc_dai_set_dma_data(dai, substream,
+			(substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+				&ssi_private->dma_params_tx :
+				&ssi_private->dma_params_rx);
+
 	return 0;
 }
 
@@ -706,6 +718,35 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev)
                 /* Older 8610 DTs didn't have the fifo-depth property */
 		ssi_private->fifo_depth = 8;
 
+	if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx21-ssi")) {
+		u32 dma_events[2];
+		ssi_private->ssi_on_imx = 1;
+		/*
+		 * We have burstsize be "fifo_depth - 2" to match the SSI
+		 * watermark setting in fsl_ssi_startup().
+		 */
+		ssi_private->dma_params_tx.burstsize =
+			ssi_private->fifo_depth - 2;
+		ssi_private->dma_params_rx.burstsize =
+			ssi_private->fifo_depth - 2;
+		ssi_private->dma_params_tx.dma_addr =
+			ssi_private->ssi_phys + offsetof(struct ccsr_ssi, stx0);
+		ssi_private->dma_params_rx.dma_addr =
+			ssi_private->ssi_phys + offsetof(struct ccsr_ssi, srx0);
+		/*
+		 * TODO: This is a temporary solution and should be changed
+		 * to use generic DMA binding later when the helplers get in.
+		 */
+		ret = of_property_read_u32_array(pdev->dev.of_node,
+					"fsl,ssi-dma-events", dma_events, 2);
+		if (ret) {
+			dev_err(&pdev->dev, "could not get dma events\n");
+			goto error_irq;
+		}
+		ssi_private->dma_params_tx.dma = dma_events[0];
+		ssi_private->dma_params_rx.dma = dma_events[1];
+	}
+
 	/* Initialize the the device_attribute structure */
 	dev_attr = &ssi_private->dev_attr;
 	sysfs_attr_init(&dev_attr->attr);
@@ -729,6 +770,24 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev)
 		goto error_dev;
 	}
 
+	/*
+	 * In case of imx, the machine driver uses new binding which does
+	 * not require SSI driver to trigger machine driver's probe, but
+	 * the pcm device needs to be registered here.
+	 */
+	if (ssi_private->ssi_on_imx) {
+		ssi_private->imx_pcm_pdev =
+			platform_device_register_simple("imx-pcm-audio",
+							-1, NULL, 0);
+		if (IS_ERR(ssi_private->imx_pcm_pdev)) {
+			ret = PTR_ERR(ssi_private->imx_pcm_pdev);
+			goto error_dev;
+		} else {
+			/* success for imx */
+			return 0;
+		}
+	}
+
 	/* Trigger the machine driver's probe function.  The platform driver
 	 * name of the machine driver is taken from /compatible property of the
 	 * device tree.  We also pass the address of the CPU DAI driver
@@ -754,6 +813,8 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev)
 
 error_dai:
 	snd_soc_unregister_dai(&pdev->dev);
+	if (ssi_private->ssi_on_imx)
+		platform_device_unregister(ssi_private->imx_pcm_pdev);
 
 error_dev:
 	dev_set_drvdata(&pdev->dev, NULL);
@@ -780,6 +841,8 @@ static int fsl_ssi_remove(struct platform_device *pdev)
 
 	platform_device_unregister(ssi_private->pdev);
 	snd_soc_unregister_dai(&pdev->dev);
+	if (ssi_private->ssi_on_imx)
+		platform_device_unregister(ssi_private->imx_pcm_pdev);
 	device_remove_file(&pdev->dev, &ssi_private->dev_attr);
 
 	free_irq(ssi_private->irq, ssi_private);
@@ -793,6 +856,7 @@ static int fsl_ssi_remove(struct platform_device *pdev)
 
 static const struct of_device_id fsl_ssi_ids[] = {
 	{ .compatible = "fsl,mpc8610-ssi", },
+	{ .compatible = "fsl,imx21-ssi", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, fsl_ssi_ids);
-- 
1.7.5.4

[PATCH v4 10/10] ASoC: fsl: add imx-sgtl5000 machine driver

[Shawn Guo]

This is the initial imx-sgtl5000 machine driver support with only
playback dai link implemented.  More features can be added on top
of it later.

It's a device tree only machine driver working with fsl_ssi driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 .../bindings/sound/imx-audio-sgtl5000.txt          |   24 +++
 sound/soc/fsl/Kconfig                              |   12 ++
 sound/soc/fsl/Makefile                             |    2 +
 sound/soc/fsl/imx-sgtl5000.c                       |  177 ++++++++++++++++++++
 4 files changed, 215 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
 create mode 100644 sound/soc/fsl/imx-sgtl5000.c

diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
new file mode 100644
index 0000000..421a374
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
@@ -0,0 +1,24 @@
+Freescale i.MX audio complex with SGTL5000 codec
+
+Required properties:
+- compatible : "fsl,imx-audio-sgtl5000"
+- model : The user-visible name of this sound complex
+- ssi-controller : The phandle of the i.MX SSI controller
+- audio-codec : The phandle of the SGTL5000 audio codec
+- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
+- mux-ext-port : The external port of the i.MX audio muxer
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+	compatible = "fsl,imx51-babbage-sgtl5000",
+		     "fsl,imx-audio-sgtl5000";
+	model = "imx51-babbage-sgtl5000";
+	ssi-controller = <&ssi1>;
+	audio-codec = <&sgtl5000>;
+	mux-int-port = <1>;
+	mux-ext-port = <3>;
+};
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 535ee73..aa14fc9 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -164,4 +164,16 @@ config SND_SOC_EUKREA_TLV320
 	  Enable I2S based access to the TLV320AIC23B codec attached
 	  to the SSI interface
 
+config SND_SOC_IMX_SGTL5000
+	tristate "SoC Audio support for i.MX boards with sgtl5000"
+	depends on OF && I2C
+	select SND_SOC_SGTL5000
+	select SND_SOC_IMX_PCM_DMA
+	select SND_SOC_IMX_AUDMUX
+	select SND_SOC_FSL_SSI
+	select SND_SOC_FSL_UTILS
+	help
+	  Say Y if you want to add support for SoC audio on an i.MX board with
+	  a sgtl5000 codec.
+
 endif # SND_IMX_SOC
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index fbdbed0..638d385 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -40,8 +40,10 @@ snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
 snd-soc-phycore-ac97-objs := phycore-ac97.o
 snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
 snd-soc-wm1133-ev1-objs := wm1133-ev1.o
+snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
 
 obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
 obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
 obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
 obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
+obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
new file mode 100644
index 0000000..3786b61
--- /dev/null
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <sound/soc.h>
+
+#include "../codecs/sgtl5000.h"
+#include "imx-audmux.h"
+
+#define DAI_NAME_SIZE	32
+
+struct imx_sgtl5000_data {
+	struct snd_soc_dai_link dai;
+	struct snd_soc_card card;
+	char codec_dai_name[DAI_NAME_SIZE];
+	char platform_name[DAI_NAME_SIZE];
+	unsigned int clk_frequency;
+};
+
+static int imx_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct imx_sgtl5000_data *data = container_of(rtd->card,
+					struct imx_sgtl5000_data, card);
+	struct device *dev = rtd->card->dev;
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(rtd->codec_dai, SGTL5000_SYSCLK,
+				     data->clk_frequency, SND_SOC_CLOCK_IN);
+	if (ret) {
+		dev_err(dev, "could not set codec driver clock params\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __devinit imx_sgtl5000_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *ssi_np, *codec_np;
+	struct platform_device *ssi_pdev;
+	struct imx_sgtl5000_data *data;
+	int int_port, ext_port;
+	int ret;
+
+	ret = of_property_read_u32(np, "mux-int-port", &int_port);
+	if (ret) {
+		dev_err(&pdev->dev, "mux-int-port missing or invalid\n");
+		return ret;
+	}
+	ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
+	if (ret) {
+		dev_err(&pdev->dev, "mux-ext-port missing or invalid\n");
+		return ret;
+	}
+
+	/*
+	 * The port numbering in the hardware manual starts at 1, while
+	 * the audmux API expects it starts at 0.
+	 */
+	int_port--;
+	ext_port--;
+	ret = imx_audmux_v2_configure_port(int_port,
+			IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR,
+			IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port));
+	if (ret) {
+		dev_err(&pdev->dev, "audmux internal port setup failed\n");
+		return ret;
+	}
+	imx_audmux_v2_configure_port(ext_port,
+			IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TCSEL(int_port),
+			IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
+	if (ret) {
+		dev_err(&pdev->dev, "audmux external port setup failed\n");
+		return ret;
+	}
+
+	ssi_np = of_parse_phandle(pdev->dev.of_node, "ssi-controller", 0);
+	codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0);
+	if (!ssi_np || !codec_np) {
+		dev_err(&pdev->dev, "phandle missing or invalid\n");
+		return -EINVAL;
+	}
+
+	ssi_pdev = of_find_device_by_node(ssi_np);
+	if (!ssi_pdev) {
+		dev_err(&pdev->dev, "failed to find SSI platform device\n");
+		return -EINVAL;
+	}
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	ret = of_property_read_u32(codec_np, "clock-frequency",
+				   &data->clk_frequency);
+	if (ret) {
+		dev_err(&pdev->dev, "clock-frequency missing or invalid\n");
+		return ret;
+	}
+
+	data->dai.name = "HiFi";
+	data->dai.stream_name = "HiFi";
+	data->dai.codec_dai_name = "sgtl5000";
+	data->dai.codec_of_node = codec_np;
+	data->dai.cpu_dai_name = dev_name(&ssi_pdev->dev);
+	data->dai.platform_name = "imx-pcm-audio";
+	data->dai.init = &imx_sgtl5000_dai_init;
+	data->dai.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+			    SND_SOC_DAIFMT_CBM_CFM;
+
+	data->card.dev = &pdev->dev;
+	ret = snd_soc_of_parse_card_name(&data->card, "model");
+	if (ret)
+		return ret;
+	data->card.num_links = 1;
+	data->card.dai_link = &data->dai;
+
+	ret = snd_soc_register_card(&data->card);
+	if (ret) {
+		dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, data);
+	of_node_put(ssi_np);
+	of_node_put(codec_np);
+
+	return 0;
+}
+
+static int __devexit imx_sgtl5000_remove(struct platform_device *pdev)
+{
+	struct imx_sgtl5000_data *data = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_card(&data->card);
+
+	return 0;
+}
+
+static const struct of_device_id imx_sgtl5000_dt_ids[] = {
+	{ .compatible = "fsl,imx-audio-sgtl5000", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_sgtl5000_dt_ids);
+
+static struct platform_driver imx_sgtl5000_driver = {
+	.driver = {
+		.name = "imx-sgtl5000",
+		.owner = THIS_MODULE,
+		.of_match_table = imx_sgtl5000_dt_ids,
+	},
+	.probe = imx_sgtl5000_probe,
+	.remove = __devexit_p(imx_sgtl5000_remove),
+};
+module_platform_driver(imx_sgtl5000_driver);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Freescale i.MX SGTL5000 ASoC machine driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx-sgtl5000");
-- 
1.7.5.4

[PATCH v4 06/10] ASoC: fsl: check property 'compatible' for the machine name

[Timur Tabi]

Shawn Guo wrote:
> Check /compatible rather than /model to determine the machine name.
> The p1022ds older device trees get a different /model from the new
> ones, while /compatible is consistent there, so checking /compatible
> will save the bother of detecting older p1022ds device trees.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---

I'm pretty sure I ack'd this patch already.  Regardless, it does not apply
to for-3.4.

Applying: ASoC: fsl: check property 'compatible' for the machine name
error: patch failed: sound/soc/fsl/fsl_ssi.c:716
error: sound/soc/fsl/fsl_ssi.c: patch does not apply
error: patch failed: sound/soc/fsl/mpc8610_hpcd.c:402
error: sound/soc/fsl/mpc8610_hpcd.c: patch does not apply
error: patch failed: sound/soc/fsl/p1022_ds.c:403
error: sound/soc/fsl/p1022_ds.c: patch does not apply

-- 
Timur Tabi
Linux kernel developer at Freescale

[PATCH v4 06/10] ASoC: fsl: check property 'compatible' for the machine name

[Mark Brown]

On Tue, Mar 13, 2012 at 06:12:58PM -0500, Timur Tabi wrote:

> I'm pretty sure I ack'd this patch already.  Regardless, it does not apply
> to for-3.4.

You did, it doesn't apply because it's already applied.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120313/bb8131cc/attachment.sig>

[PATCH v4 06/10] ASoC: fsl: check property 'compatible' for the machine name

[Shawn Guo]

On Tue, Mar 13, 2012 at 11:15:02PM +0000, Mark Brown wrote:
> On Tue, Mar 13, 2012 at 06:12:58PM -0500, Timur Tabi wrote:
> 
> > I'm pretty sure I ack'd this patch already.  Regardless, it does not apply
> > to for-3.4.
> 
> You did, it doesn't apply because it's already applied.

My bad.  I forgot rebasing the series on the latest sound tree.

-- 
Regards,
Shawn

[PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi

[Sascha Hauer]

On Mon, Mar 12, 2012 at 07:58:47PM +0800, Shawn Guo wrote:
> Changes since v3:
>  * Change imx compatible to "fsl,imx21-ssi"
>  * Leave locking issue as a FIXME for Timur to sort out separately
> 
> ---
> Shawn Guo (10):
>       ASoC: fsl: separate SSI and DMA Kconfig options
>       ASoC: imx: merge sound/soc/imx into sound/soc/fsl
>       ASoC: fsl: rename imx-pcm Kconfig options and filename
>       ASoC: fsl: create fsl_utils to accommodate the common functions
>       ASoC: fsl: remove helper fsl_asoc_get_codec_dev_name
>       ASoC: fsl: check property 'compatible' for the machine name
>       ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX
>       ASoC: fsl: remove the fatal error checking on codec-handle
>       ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers
>       ASoC: fsl: add imx-sgtl5000 machine driver

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

What are the next steps here? Now we have fsl_ssi.c and imx-ssi.c, one
for dt bindings and the other one for platform bindings and also AC97
support. They should probably get merged some day which might be a bit
difficult since currently I don't see the platform users moving over
to devicetree and the seem to be no AC97 users in powerpc.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi

[Shawn Guo]

On Wed, Mar 14, 2012 at 10:01:15AM +0100, Sascha Hauer wrote:
...
> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
> 
Thanks.

> What are the next steps here? Now we have fsl_ssi.c and imx-ssi.c, one
> for dt bindings and the other one for platform bindings and also AC97
> support. They should probably get merged some day which might be a bit
> difficult since currently I don't see the platform users moving over
> to devicetree and the seem to be no AC97 users in powerpc.
> 
When I was tasked to add DT support for imx5 audio driver, it was my
first attempt to add it on top of imx-ssi driver.  But Timur strongly
disagree with that.  Instead, he asked me to reuse fsl_ssi.  That's
why I came up with this series.  I did not really plan to completely
remove imx-ssi by merging it into fsl_ssi.  But if someday we have all
those imx-ssi users migrated to DT, that will become something we
should consider to do then.

-- 
Regards,
Shawn

[PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi

[Timur Tabi]

Sascha Hauer wrote:
> What are the next steps here? Now we have fsl_ssi.c and imx-ssi.c, one
> for dt bindings and the other one for platform bindings and also AC97
> support. They should probably get merged some day which might be a bit
> difficult since currently I don't see the platform users moving over
> to devicetree and the seem to be no AC97 users in powerpc.

I don't have any problem with adding AC97 support to fsl_ssi.c, assuming
it's not a huge mess.  I don't know enough about AC97 to know how easy
that is, though.

-- 
Timur Tabi
Linux kernel developer at Freescale

[alsa-devel] [PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi

[Sascha Hauer]

On Wed, Mar 14, 2012 at 06:02:44PM -0500, Timur Tabi wrote:
> Sascha Hauer wrote:
> > What are the next steps here? Now we have fsl_ssi.c and imx-ssi.c, one
> > for dt bindings and the other one for platform bindings and also AC97
> > support. They should probably get merged some day which might be a bit
> > difficult since currently I don't see the platform users moving over
> > to devicetree and the seem to be no AC97 users in powerpc.
> 
> I don't have any problem with adding AC97 support to fsl_ssi.c, assuming
> it's not a huge mess.  I don't know enough about AC97 to know how easy
> that is, though.

>From the hardware side it's basically calling setup_channel_to_ac97()
and providing AC97 register read/write functions. One ugly detail is
that we need a bus reset function. This basically means putting the
pins in gpio mode and issuing the reset manually. The SSI unit does
not provide a way to reset the bus.
I don't know how this AC97 stuff integrates into the devicetree. Anyway,
that's a topic for future discussions and shouldn't block the current
patches. I just want to make sure that the original imx-ssi driver is
not removed as long as the fsl_ssi driver does not have AC97 support.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[alsa-devel] [PATCH v4] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi

[Mark Brown]

On Thu, Mar 15, 2012 at 10:52:31AM +0100, Sascha Hauer wrote:

> I don't know how this AC97 stuff integrates into the devicetree. Anyway,
> that's a topic for future discussions and shouldn't block the current
> patches. I just want to make sure that the original imx-ssi driver is
> not removed as long as the fsl_ssi driver does not have AC97 support.

AC'97 should be hotpluggable once you know the controller is there.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120315/6b377ecc/attachment.sig>