From: rmallon@gmail.com (Ryan Mallon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: ep93xx: use DEFINE_RES_* macros
Date: Wed, 11 Apr 2012 12:06:58 +1000 [thread overview]
Message-ID: <4F84E742.6030507@gmail.com> (raw)
In-Reply-To: <201203211135.49295.hartleys@visionengravers.com>
On 22/03/12 05:35, H Hartley Sweeten wrote:
> Use the DEFINE_RES_* macros to reduce some of the boilerplate code.
>
> Signed-off-by: Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Ryan Mallon <rmallon@gmail.com>
> Cc: Mika Westerberg <mika.westerberg@iki.fi>
Applied (with Mika's ack) to ep93xx-cleanup branch on
https://github.com/RyanMallon/linux-ep93xx.
I won't do an official announcement of the repo yet, but hopefully that
branch will remain stable :-).
Thanks,
~Ryan
>
> ---
>
> diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
> index 8d25895..a2cb176 100644
> --- a/arch/arm/mach-ep93xx/core.c
> +++ b/arch/arm/mach-ep93xx/core.c
> @@ -241,11 +241,7 @@ unsigned int ep93xx_chip_revision(void)
> * EP93xx GPIO
> *************************************************************************/
> static struct resource ep93xx_gpio_resource[] = {
> - {
> - .start = EP93XX_GPIO_PHYS_BASE,
> - .end = EP93XX_GPIO_PHYS_BASE + 0xcc - 1,
> - .flags = IORESOURCE_MEM,
> - },
> + DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc),
> };
>
> static struct platform_device ep93xx_gpio_device = {
> @@ -288,11 +284,7 @@ static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
> { IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
>
> static struct resource ep93xx_rtc_resource[] = {
> - {
> - .start = EP93XX_RTC_PHYS_BASE,
> - .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1,
> - .flags = IORESOURCE_MEM,
> - },
> + DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c),
> };
>
> static struct platform_device ep93xx_rtc_device = {
> @@ -304,16 +296,8 @@ static struct platform_device ep93xx_rtc_device = {
>
>
> static struct resource ep93xx_ohci_resources[] = {
> - [0] = {
> - .start = EP93XX_USB_PHYS_BASE,
> - .end = EP93XX_USB_PHYS_BASE + 0x0fff,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = IRQ_EP93XX_USB,
> - .end = IRQ_EP93XX_USB,
> - .flags = IORESOURCE_IRQ,
> - },
> + DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
> + DEFINE_RES_IRQ(IRQ_EP93XX_USB),
> };
>
>
> @@ -372,15 +356,8 @@ void __init ep93xx_register_flash(unsigned int width,
> static struct ep93xx_eth_data ep93xx_eth_data;
>
> static struct resource ep93xx_eth_resource[] = {
> - {
> - .start = EP93XX_ETHERNET_PHYS_BASE,
> - .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
> - .flags = IORESOURCE_MEM,
> - }, {
> - .start = IRQ_EP93XX_ETHERNET,
> - .end = IRQ_EP93XX_ETHERNET,
> - .flags = IORESOURCE_IRQ,
> - }
> + DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000),
> + DEFINE_REQ_IRQ(IRQ_EP93XX_ETHERNET),
> };
>
> static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
> @@ -461,16 +438,8 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
> static struct ep93xx_spi_info ep93xx_spi_master_data;
>
> static struct resource ep93xx_spi_resources[] = {
> - {
> - .start = EP93XX_SPI_PHYS_BASE,
> - .end = EP93XX_SPI_PHYS_BASE + 0x18 - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - {
> - .start = IRQ_EP93XX_SSP,
> - .end = IRQ_EP93XX_SSP,
> - .flags = IORESOURCE_IRQ,
> - },
> + DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18),
> + DEFINE_RES_IRQ(IRQ_EP93XX_SSP),
> };
>
> static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32);
> @@ -541,11 +510,7 @@ static struct platform_device ep93xx_leds = {
> * EP93xx pwm peripheral handling
> *************************************************************************/
> static struct resource ep93xx_pwm0_resource[] = {
> - {
> - .start = EP93XX_PWM_PHYS_BASE,
> - .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1,
> - .flags = IORESOURCE_MEM,
> - },
> + DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10),
> };
>
> static struct platform_device ep93xx_pwm0_device = {
> @@ -556,11 +521,7 @@ static struct platform_device ep93xx_pwm0_device = {
> };
>
> static struct resource ep93xx_pwm1_resource[] = {
> - {
> - .start = EP93XX_PWM_PHYS_BASE + 0x20,
> - .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1,
> - .flags = IORESOURCE_MEM,
> - },
> + DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10),
> };
>
> static struct platform_device ep93xx_pwm1_device = {
> @@ -628,11 +589,7 @@ EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
> static struct ep93xxfb_mach_info ep93xxfb_data;
>
> static struct resource ep93xx_fb_resource[] = {
> - {
> - .start = EP93XX_RASTER_PHYS_BASE,
> - .end = EP93XX_RASTER_PHYS_BASE + 0x800 - 1,
> - .flags = IORESOURCE_MEM,
> - },
> + DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800),
> };
>
> static struct platform_device ep93xx_fb_device = {
> @@ -680,15 +637,8 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
> static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
>
> static struct resource ep93xx_keypad_resource[] = {
> - {
> - .start = EP93XX_KEY_MATRIX_PHYS_BASE,
> - .end = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
> - .flags = IORESOURCE_MEM,
> - }, {
> - .start = IRQ_EP93XX_KEY,
> - .end = IRQ_EP93XX_KEY,
> - .flags = IORESOURCE_IRQ,
> - },
> + DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c),
> + DEFINE_RES_IRQ(IRQ_EP93XX_KEY),
> };
>
> static struct platform_device ep93xx_keypad_device = {
> @@ -761,11 +711,7 @@ EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
> * EP93xx I2S audio peripheral handling
> *************************************************************************/
> static struct resource ep93xx_i2s_resource[] = {
> - {
> - .start = EP93XX_I2S_PHYS_BASE,
> - .end = EP93XX_I2S_PHYS_BASE + 0x100 - 1,
> - .flags = IORESOURCE_MEM,
> - },
> + DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
> };
>
> static struct platform_device ep93xx_i2s_device = {
> @@ -824,16 +770,8 @@ EXPORT_SYMBOL(ep93xx_i2s_release);
> * EP93xx AC97 audio peripheral handling
> *************************************************************************/
> static struct resource ep93xx_ac97_resources[] = {
> - {
> - .start = EP93XX_AAC_PHYS_BASE,
> - .end = EP93XX_AAC_PHYS_BASE + 0xac - 1,
> - .flags = IORESOURCE_MEM,
> - },
> - {
> - .start = IRQ_EP93XX_AACINTR,
> - .end = IRQ_EP93XX_AACINTR,
> - .flags = IORESOURCE_IRQ,
> - },
> + DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac),
> + DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR),
> };
>
> static struct platform_device ep93xx_ac97_device = {
prev parent reply other threads:[~2012-04-11 2:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-21 18:35 [PATCH] arm: ep93xx: use DEFINE_RES_* macros H Hartley Sweeten
2012-03-21 19:44 ` Mika Westerberg
2012-04-11 2:06 ` Ryan Mallon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F84E742.6030507@gmail.com \
--to=rmallon@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).