From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Mon, 16 Apr 2012 10:06:57 +0100 Subject: [PATCH 6/7] MMC: mmci: Enable Device Tree support for ux500 variants In-Reply-To: References: <1334325909-5779-1-git-send-email-lee.jones@linaro.org> <1334325909-5779-7-git-send-email-lee.jones@linaro.org> Message-ID: <4F8BE131.4090701@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 16/04/12 09:48, Linus Walleij wrote: > On Fri, Apr 13, 2012 at 4:05 PM, Lee Jones wrote: > >> Provide a means to collect attributes specific to ST-Ericsson's >> ux500 variant series. This patch registers itself as the AMBA >> driver to be called during the probe process. Once all >> attributes and ux500 specifics are are collected the normal >> mmci core probe is called. >> >> Signed-off-by: Lee Jones >> --- >> arch/arm/boot/dts/snowball.dts | 21 ++++++++++-- >> arch/arm/mach-ux500/board-mop500-sdi.c | 4 +- >> arch/arm/mach-ux500/board-mop500.c | 3 +- >> arch/arm/mach-ux500/board-mop500.h | 4 ++ >> drivers/mmc/host/mmci.c | 58 +++++++++++++++++++++++++++++-- >> 5 files changed, 80 insertions(+), 10 deletions(-) > > Can you split this in a clean patch to mmci.c and another patch for all > the ux500 stuff? You can add my Acked-by for both. I can do that. You'll have it by this afternoon. Thanks. > Obviously I cannot apply the mmci.c patch without Russell's ACK, > (or you have to take it through his patch tracker). Russell has > positively affirmed that he's looking after the MMCI driver. > > If you get Russell's ACK I'll behappy to merge it through ux500 > and ARM SoC. > > Yours, > Linus Walleij -- Lee Jones Linaro ST-Ericsson Landing Team Lead M: +44 77 88 633 515 Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog