From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/18][V3] ARM: OMAP3/4 : cpuidle34xx and cpuidle44xx cleanups
Date: Tue, 01 May 2012 10:16:01 +0200 [thread overview]
Message-ID: <4F9F9BC1.9020908@linaro.org> (raw)
In-Reply-To: <87vckgltdg.fsf@ti.com>
On 05/01/2012 12:58 AM, Kevin Hilman wrote:
> Daniel Lezcano<daniel.lezcano@linaro.org> writes:
>
>> On 04/24/2012 04:05 PM, Daniel Lezcano wrote:
>>> This patchset makes some cleanup on these cpuidle drivers
>>> and consolidate the code across both architecture.
>>>
>>> Tested on OMAP3 (igepV2).
>>> Partially tested on OMAP4 (pandaboard), without offlining the cpu1.
>
> Without offlining CPU1, none of this code is executed. Can you test
> with CPU1 offlined?
Unfortunately my OMAP4 board burned :/ I am waiting for a new one.
Rob tested the series but when he unplugged the cpu1, the kernel panics
for another reason. I guess the problem should have been fixed since the
last testing.
Rob ? Do you mind the test the series again, the problem you were facing
when unplugging the cpu1 may have been fixed.
Mike ? if you have time, is it possible you test it on your board ?
>> Hi,>>
>> could be this patchset considered for inclusion ?
>>
>
> Yes. This is a good series, and a great cleanup.
>
> Unfortunately, there is lots of OMAP PM code to review at the moment so
> there's a bit of a lag in my ability to review and test.
Ok, sure. I understand, no pressure :)
Thanks a lot.
-- Daniel
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
next prev parent reply other threads:[~2012-05-01 8:16 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-24 14:05 [PATCH 00/18][V3] ARM: OMAP3/4 : cpuidle34xx and cpuidle44xx cleanups Daniel Lezcano
2012-04-24 14:05 ` [PATCH 01/18][V3] ARM: OMAP4: cpuidle - Remove unused valid field Daniel Lezcano
2012-04-24 14:05 ` [PATCH 02/18][V3] ARM: OMAP4: cpuidle - Declare the states with the driver declaration Daniel Lezcano
2012-04-24 14:05 ` [PATCH 03/18][V3] ARM: OMAP4: cpuidle - Remove the cpuidle_params_table table Daniel Lezcano
2012-04-24 14:05 ` [PATCH 04/18][V3] ARM: OMAP4: cpuidle - fix static omap4_idle_data declaration Daniel Lezcano
2012-04-24 14:05 ` [PATCH 05/18][V3] ARM: OMAP4: cpuidle - Initialize omap4_idle_data at compile time Daniel Lezcano
2012-04-24 14:05 ` [PATCH 06/18][V3] ARM: OMAP4: cpuidle - use the omap4_idle_data variable directly Daniel Lezcano
2012-04-24 14:05 ` [PATCH 07/18][V3] ARM: OMAP4: cpuidle - remove omap4_idle_data initialization at boot time Daniel Lezcano
2012-04-24 14:05 ` [PATCH 08/18][V3] ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table Daniel Lezcano
2012-04-24 14:05 ` [PATCH 09/18][V3] ARM: OMAP3: define cpuidle statically Daniel Lezcano
2012-04-24 14:05 ` [PATCH 10/18][V3] ARM: OMAP3: cpuidle - remove errata check in the init function Daniel Lezcano
2012-04-24 14:05 ` [PATCH 11/18][V3] ARM: OMAP3: cpuidle - remove the 'valid' field Daniel Lezcano
2012-05-03 20:19 ` Kevin Hilman
2012-05-03 20:29 ` Daniel Lezcano
2012-04-24 14:05 ` [PATCH 12/18][V3] ARM: OMAP3: cpuidle - remove cpuidle_params_table Daniel Lezcano
2012-04-24 14:05 ` [PATCH 13/18][V3] ARM: OMAP3: define statically the omap3_idle_data Daniel Lezcano
2012-04-24 14:05 ` [PATCH 14/18][V3] ARM: OMAP3: cpuidle - use omap3_idle_data directly Daniel Lezcano
2012-04-24 14:05 ` [PATCH 15/18][V3] ARM: OMAP3: cpuidle - simplify next_valid_state Daniel Lezcano
2012-04-24 14:05 ` [PATCH 16/18][V3] ARM: OMAP3: set omap3_idle_data as static Daniel Lezcano
2012-04-24 14:05 ` [PATCH 17/18][V3] ARM: OMAP3/4: consolidate cpuidle Makefile Daniel Lezcano
2012-05-03 20:34 ` Kevin Hilman
2012-05-03 23:03 ` Daniel Lezcano
2012-04-24 14:05 ` [PATCH 18/18][V3] ARM: OMAP3: cpuidle - set global variables static Daniel Lezcano
2012-05-03 20:26 ` Kevin Hilman
2012-05-03 23:02 ` Daniel Lezcano
2012-04-25 22:00 ` [PATCH 00/18][V3] ARM: OMAP3/4 : cpuidle34xx and cpuidle44xx cleanups Daniel Lezcano
2012-04-30 22:58 ` Kevin Hilman
2012-05-01 8:16 ` Daniel Lezcano [this message]
2012-05-01 9:25 ` Amit Kucheria
[not found] ` <CAMQu2gzK=u1kkbv9nzRyO3xbqVhZkf0KP=ceCyNteSituBZPrg@mail.gmail.com>
2012-05-01 10:20 ` Daniel Lezcano
2012-05-02 6:20 ` Shilimkar, Santosh
2012-05-03 20:39 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F9F9BC1.9020908@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).