From: hs@denx.de (Heiko Schocher)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 5/7] ARM: davinci: i2c: add OF support
Date: Tue, 29 May 2012 15:28:21 +0200 [thread overview]
Message-ID: <4FC4CEF5.2030206@denx.de> (raw)
In-Reply-To: <20120526060854.A9BB93E2E10@localhost>
Hello Grant,
Am 26.05.2012 08:08, Grant Likely wrote:
> On Tue, 22 May 2012 15:55:18 +0200, Heiko Schocher<hs@denx.de> wrote:
>> add of support for the davinci i2c driver.
>>
>> Signed-off-by: Heiko Schocher<hs@denx.de>
>> Cc: davinci-linux-open-source at linux.davincidsp.com
>> Cc: linux-arm-kernel at lists.infradead.org
>> Cc: devicetree-discuss at lists.ozlabs.org
>> Cc: linux-i2c at vger.kernel.org
>> Cc: Ben Dooks<ben-linux@fluff.org>
>> Cc: Wolfram Sang<w.sang@pengutronix.de>
>> Cc: Grant Likely<grant.likely@secretlab.ca>
>> Cc: Sekhar Nori<nsekhar@ti.com>
>> Cc: Wolfgang Denk<wd@denx.de>
>> Cc: Sylwester Nawrocki<s.nawrocki@samsung.com>
>>
>> ---
>> - changes for v2:
>> - add comments from Sylwester Nawrocki<s.nawrocki@samsung.com>:
>> - use "cell-index" instead "id"
>> - OF_DEV_AUXDATA in the machine code, instead pre-define platform
>> device name
>> - add comment from Grant Likely:
>> - removed "id" resp. "cell-index" completely
>> - fixed documentation
>> - use of_match_ptr()
>> - use devm_kzalloc() for allocating plattform data mem
>> - fixed a whitespace issue
>> - no changes for v3
>> - changes for v4
>> remove "pinmux-handle" property as discussed here:
>> http://www.spinics.net/lists/arm-kernel/msg175701.html
>> with Nori Sekhar
>> ---
>> .../devicetree/bindings/arm/davinci/i2c.txt | 31 +++++++++++++++++++
>> drivers/i2c/busses/i2c-davinci.c | 32 ++++++++++++++++++++
>> 2 files changed, 63 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/arm/davinci/i2c.txt
[...]
>> diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
>> index a76d85f..c1783bb 100644
>> --- a/drivers/i2c/busses/i2c-davinci.c
>> +++ b/drivers/i2c/busses/i2c-davinci.c
[...]
>> @@ -676,6 +685,26 @@ static int davinci_i2c_probe(struct platform_device *pdev)
>> dev->irq = irq->start;
>> platform_set_drvdata(pdev, dev);
>>
>> + if ((dev->dev->platform_data == NULL)&&
>> + (pdev->dev.of_node)) {
>> + struct davinci_i2c_platform_data *pdata;
>> + u32 prop;
>> +
>> + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
>> + if (!pdata) {
>> + r = -ENOMEM;
>> + goto err_free_mem;
>> + }
>> + memcpy(pdata,&davinci_i2c_platform_data_default,
>> + sizeof(*pdata));
>> + dev->dev->platform_data = pdata;
>
> This is actually illegal. Drivers must not change the value of
> dev->dev->platform_data. It messes up unbinding/rebinding drivers.
> You'll need to have a copy of the pointer in davinci_i2c_dev.
fixed.
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2012-05-29 13:28 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-22 13:55 [PATCH v4 0/7] ARM: davinci: add support for the am1808 based enbw_cmc board Heiko Schocher
2012-05-22 13:55 ` [PATCH v4 1/7] ARM: davinci, intc: Add irq domain support Heiko Schocher
2012-05-22 15:51 ` Sergei Shtylyov
2012-05-26 6:03 ` Grant Likely
2012-05-29 13:11 ` Heiko Schocher
2012-05-22 13:55 ` [PATCH v4 2/7] ARM: davinci, intc: Add OF support for TI interrupt controller Heiko Schocher
2012-05-22 13:55 ` [PATCH v4 3/7] ARM: davinci: configure davinci aemif chipselects through OF Heiko Schocher
2012-05-22 13:55 ` [PATCH v4 4/7] ARM: davinci: net: davinci_emac: add OF support Heiko Schocher
2012-05-22 13:55 ` [PATCH v4 5/7] ARM: davinci: i2c: " Heiko Schocher
2012-05-26 6:08 ` Grant Likely
2012-05-29 13:28 ` Heiko Schocher [this message]
2012-05-22 13:55 ` [PATCH v4 6/7] ARM: mtd: nand: davinci: add OF support for davinci nand controller Heiko Schocher
2012-05-22 13:55 ` [PATCH v4 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FC4CEF5.2030206@denx.de \
--to=hs@denx.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).