From: jgq516@gmail.com (Xiao Jiang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4
Date: Wed, 30 May 2012 11:19:37 +0800 [thread overview]
Message-ID: <4FC591C9.2050004@gmail.com> (raw)
In-Reply-To: <4FC50CCD.7090404@ti.com>
Jon Hunter wrote:
> On 05/25/2012 05:42 AM, jgq516 at gmail.com wrote:
>
>> From: Xiao Jiang <jgq516@gmail.com>
>>
>> Add wdt node to support dt.
>>
>> Signed-off-by: Xiao Jiang <jgq516@gmail.com>
>> ---
>> arch/arm/boot/dts/omap3.dtsi | 5 +++++
>> arch/arm/boot/dts/omap4.dtsi | 5 +++++
>> 2 files changed, 10 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
>> index 99474fa..039df5c 100644
>> --- a/arch/arm/boot/dts/omap3.dtsi
>> +++ b/arch/arm/boot/dts/omap3.dtsi
>> @@ -215,5 +215,10 @@
>> compatible = "ti,omap3-hsmmc";
>> ti,hwmods = "mmc3";
>> };
>> +
>> + wdt: wdt at 48314000{
>>
>
> Minor comment, may be call this wdt2 as this is watchdog timer 2. Also
> ass a space between the address and the "{".
>
>
Ok, will change it to "wdt2: wdt at 48314000 {".
>> + compatible = "ti,omap3-wdt";
>> + ti,hwmods = "wd_timer2";
>> + };
>> };
>> };
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index 359c497..d01403d 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -272,5 +272,10 @@
>> ti,hwmods = "mmc5";
>> ti,needs-special-reset;
>> };
>> +
>> + wdt: wdt at 4a314000{
>>
>
> Same as above.
>
>
Ditto.
>> + compatible = "ti,omap4-wdt";
>> + ti,hwmods = "wd_timer2";
>> + };
>> };
>> };
>>
>
> Also we should add some documentation to describe the binding. Here it
> is very simple, but nonetheless we should have something as we have for
> gpio [1].
>
>
Thanks for reminding, how about below patch?
diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
new file mode 100644
index 0000000..4272d06
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
@@ -0,0 +1,15 @@
+TI Watchdog Timer (WDT) Controller for OMAP
+
+Required properties:
+- compatible:
+ - "ti,omap2-wdt" for OMAP2
+ - "ti,omap3-wdt" for OMAP3
+ - "ti,omap4-wdt" for OMAP4
+- ti,hwmods: Name of the hwmod associated to the WDT
+
+Examples:
+
+wdt2: wdt at 73f98000 {
+ compatible = "ti,omap4-wdt";
+ ti,hwmods = "wd_timer2";
+};
Regards,
Xiao
> Cheers
> Jon
>
> [1]
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/devicetree/bindings/gpio/gpio-omap.txt;h=bff51a2fee1eae7d387b40ea913e04782554bf68;hb=HEAD
>
next prev parent reply other threads:[~2012-05-30 3:19 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-25 10:42 [PATCH 0/3] omap3/omap4: add device tree support for wdt jgq516 at gmail.com
2012-05-25 10:42 ` [PATCH 1/3] arm/dts: add wdt node for omap3 and omap4 jgq516 at gmail.com
2012-05-29 17:52 ` Jon Hunter
2012-05-30 3:19 ` Xiao Jiang [this message]
2012-05-30 14:42 ` Jon Hunter
2012-05-31 5:51 ` Xiao Jiang
2012-05-31 14:55 ` Jon Hunter
2012-05-31 20:59 ` Cousson, Benoit
2012-05-25 10:42 ` [PATCH 2/3] OMAP: avoid build wdt platform device if with dt support jgq516 at gmail.com
2012-05-29 17:53 ` Jon Hunter
2012-05-25 10:42 ` [PATCH 3/3] watchdog: omap_wdt: add device tree support jgq516 at gmail.com
2012-05-29 18:06 ` Jon Hunter
2012-05-30 3:18 ` Xiao Jiang
2012-05-30 7:54 ` Cousson, Benoit
2012-05-30 10:14 ` Xiao Jiang
2012-05-30 10:31 ` Xiao Jiang
2012-05-30 15:03 ` Jon Hunter
2012-05-30 15:30 ` Cousson, Benoit
2012-05-30 16:12 ` Jon Hunter
2012-05-29 17:47 ` [PATCH 0/3] omap3/omap4: add device tree support for wdt Jon Hunter
2012-05-30 10:14 ` Xiao Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FC591C9.2050004@gmail.com \
--to=jgq516@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).