linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ben.dooks@codethink.co.uk (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC 1/3] i2c-nomadik: move header from <plat/i2c.h> to <linux/i2c-nomadik.h>
Date: Thu, 31 May 2012 09:32:15 +0100	[thread overview]
Message-ID: <4FC72C8F.30206@codethink.co.uk> (raw)
In-Reply-To: <ca47a47e0a4db31545549ed978e1dc7b3aad4377.1338398567.git.rubini@gnudd.com>

On 30/05/12 18:45, Alessandro Rubini wrote:
> The header and driver were only used by arm/mach-nomadik and
> arm/mach-u8500.  The STA2X11 I/O Hub exports on PCIe a number of
> devices, including i2c-nomadik.  This patch allows compilation of
> the driver under x86.
>
> Signed-off-by: Alessandro Rubini<rubini@gnudd.com>
> Acked-by: Giancarlo Asnaghi<giancarlo.asnaghi@st.com>

> -
> -#endif	/* __PLAT_I2C_H */
> diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
> index 5267ab9..09b7589 100644
> --- a/drivers/i2c/busses/i2c-nomadik.c
> +++ b/drivers/i2c/busses/i2c-nomadik.c
> @@ -23,8 +23,7 @@
>   #include<linux/io.h>
>   #include<linux/regulator/consumer.h>
>   #include<linux/pm_runtime.h>
> -
> -#include<plat/i2c.h>
> +#include<linux/i2c-nomadik.h>
>
>   #define DRIVER_NAME "nmk-i2c"
>
> diff --git a/include/linux/i2c-nomadik.h b/include/linux/i2c-nomadik.h
> new file mode 100644
> index 0000000..9350fe9
> --- /dev/null
> +++ b/include/linux/i2c-nomadik.h
> @@ -0,0 +1,39 @@
> +/*
> + * Copyright (C) 2009 ST-Ericsson
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2, as
> + * published by the Free Software Foundation.
> + */
> +#ifndef __LINUX_I2C_NOMADIK_H
> +#define __LINUX_I2C_NOMADIK_H
> +
> +enum i2c_freq_mode {
> +	I2C_FREQ_MODE_STANDARD,		/* up to 100 Kb/s */
> +	I2C_FREQ_MODE_FAST,		/* up to 400 Kb/s */
> +	I2C_FREQ_MODE_HIGH_SPEED,	/* up to 3.4 Mb/s */
> +	I2C_FREQ_MODE_FAST_PLUS,	/* up to 1 Mb/s */
> +};
> +
> +/**
> + * struct nmk_i2c_controller - client specific controller configuration
> + * @clk_freq:	clock frequency for the operation mode
> + * @slsu:	Slave data setup time in ns.
> + *		The needed setup time for three modes of operation
> + *		are 250ns, 100ns and 10ns respectively thus leading
> + *		to the values of 14, 6, 2 for a 48 MHz i2c clk
> + * @tft:	Tx FIFO Threshold in bytes
> + * @rft:	Rx FIFO Threshold in bytes
> + * @timeout	Slave response timeout(ms)
> + * @sm:		speed mode
> + */
> +struct nmk_i2c_controller {
> +	unsigned long	clk_freq;
> +	unsigned short	slsu;
> +	unsigned char	tft;
> +	unsigned char	rft;
> +	int timeout;
> +	enum i2c_freq_mode	sm;
> +};
> +
> +#endif	/* __LINUX_I2C_NOMADIK_H */

How about moving it to include/linux/platform_data so that we're
not filling include/linux with a bunch of driver specific includes?

-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

  parent reply	other threads:[~2012-05-31  8:32 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-30 17:45 [PATCH RFC 0/3] i2c-nomadik changes Alessandro Rubini
2012-05-30 17:45 ` [PATCH RFC 1/3] i2c-nomadik: move header from <plat/i2c.h> to <linux/i2c-nomadik.h> Alessandro Rubini
2012-05-31  1:47   ` Linus Walleij
2012-05-31  8:37     ` Ben Dooks
2012-05-31  8:32   ` Ben Dooks [this message]
2012-05-30 17:45 ` [PATCH RFC 2/3] i2c-nomadik: turn the platform driver to an amba driver Alessandro Rubini
2012-05-31  1:51   ` Linus Walleij
2012-05-31  8:37     ` Ben Dooks
2012-05-31 10:16       ` Linus Walleij
2012-05-31 18:02       ` Alessandro Rubini
2012-06-01  1:53         ` Linus Walleij
2012-06-01  2:24           ` Lee Jones
2012-05-30 17:46 ` [PATCH RFC 3/3] i2c-nomadik: depend on ARM_AMBA, not PLAT_NOMADIK Alessandro Rubini
2012-05-31  1:55 ` [PATCH RFC 0/3] i2c-nomadik changes Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FC72C8F.30206@codethink.co.uk \
    --to=ben.dooks@codethink.co.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).