From: rmallon@gmail.com (Ryan Mallon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/3] ep93xx: IDE driver platform support code
Date: Mon, 04 Jun 2012 15:00:38 +1000 [thread overview]
Message-ID: <4FCC40F6.7040400@gmail.com> (raw)
In-Reply-To: <4F86C714.4090605@metasoft.pl>
On 12/04/12 22:14, Rafal Prylowski wrote:
>
> Add IDE driver platform support code for ep93xx.
>
> Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl>
> Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Ryan Mallon <rmallon@gmail.com>
Applied to ep93xx-devel. Sorry for the delay.
~Ryan
> ---
> arch/arm/mach-ep93xx/core.c | 96 +++++++++++++++++
> arch/arm/mach-ep93xx/include/mach/platform.h | 3
> arch/arm/mach-ep93xx/soc.h | 1
>
> Index: linux-2.6/arch/arm/mach-ep93xx/soc.h
> ===================================================================
> --- linux-2.6.orig/arch/arm/mach-ep93xx/soc.h
> +++ linux-2.6/arch/arm/mach-ep93xx/soc.h
> @@ -69,6 +69,7 @@
>
> #define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
>
> +#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000)
> #define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
>
> #define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
> Index: linux-2.6/arch/arm/mach-ep93xx/core.c
> ===================================================================
> --- linux-2.6.orig/arch/arm/mach-ep93xx/core.c
> +++ linux-2.6/arch/arm/mach-ep93xx/core.c
> @@ -868,6 +868,102 @@ static struct platform_device ep93xx_wdt
> .resource = ep93xx_wdt_resources,
> };
>
> +/*************************************************************************
> + * EP93xx IDE
> + *************************************************************************/
> +static struct resource ep93xx_ide_resources[] = {
> + DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38),
> + DEFINE_RES_IRQ(IRQ_EP93XX_EXT3),
> +};
> +
> +static struct platform_device ep93xx_ide_device = {
> + .name = "ep93xx-ide",
> + .id = -1,
> + .dev = {
> + .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> + .num_resources = ARRAY_SIZE(ep93xx_ide_resources),
> + .resource = ep93xx_ide_resources,
> +};
> +
> +void __init ep93xx_register_ide(void)
> +{
> + platform_device_register(&ep93xx_ide_device);
> +}
> +
> +int ep93xx_ide_acquire_gpio(struct platform_device *pdev)
> +{
> + int err;
> + int i;
> +
> + err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev));
> + if (err)
> + return err;
> + err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev));
> + if (err)
> + goto fail_egpio15;
> + for (i = 2; i < 8; i++) {
> + err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev));
> + if (err)
> + goto fail_gpio_e;
> + }
> + for (i = 4; i < 8; i++) {
> + err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev));
> + if (err)
> + goto fail_gpio_g;
> + }
> + for (i = 0; i < 8; i++) {
> + err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev));
> + if (err)
> + goto fail_gpio_h;
> + }
> +
> + /* GPIO ports E[7:2], G[7:4] and H used by IDE */
> + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
> + EP93XX_SYSCON_DEVCFG_GONIDE |
> + EP93XX_SYSCON_DEVCFG_HONIDE);
> + return 0;
> +
> +fail_gpio_h:
> + for (--i; i >= 0; --i)
> + gpio_free(EP93XX_GPIO_LINE_H(i));
> + i = 8;
> +fail_gpio_g:
> + for (--i; i >= 4; --i)
> + gpio_free(EP93XX_GPIO_LINE_G(i));
> + i = 8;
> +fail_gpio_e:
> + for (--i; i >= 2; --i)
> + gpio_free(EP93XX_GPIO_LINE_E(i));
> + gpio_free(EP93XX_GPIO_LINE_EGPIO15);
> +fail_egpio15:
> + gpio_free(EP93XX_GPIO_LINE_EGPIO2);
> + return err;
> +}
> +EXPORT_SYMBOL(ep93xx_ide_acquire_gpio);
> +
> +void ep93xx_ide_release_gpio(struct platform_device *pdev)
> +{
> + int i;
> +
> + for (i = 2; i < 8; i++)
> + gpio_free(EP93XX_GPIO_LINE_E(i));
> + for (i = 4; i < 8; i++)
> + gpio_free(EP93XX_GPIO_LINE_G(i));
> + for (i = 0; i < 8; i++)
> + gpio_free(EP93XX_GPIO_LINE_H(i));
> + gpio_free(EP93XX_GPIO_LINE_EGPIO15);
> + gpio_free(EP93XX_GPIO_LINE_EGPIO2);
> +
> +
> + /* GPIO ports E[7:2], G[7:4] and H used by GPIO */
> + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE |
> + EP93XX_SYSCON_DEVCFG_GONIDE |
> + EP93XX_SYSCON_DEVCFG_HONIDE);
> +}
> +EXPORT_SYMBOL(ep93xx_ide_release_gpio);
> +
> void __init ep93xx_init_devices(void)
> {
> /* Disallow access to MaverickCrunch initially */
> Index: linux-2.6/arch/arm/mach-ep93xx/include/mach/platform.h
> ===================================================================
> --- linux-2.6.orig/arch/arm/mach-ep93xx/include/mach/platform.h
> +++ linux-2.6/arch/arm/mach-ep93xx/include/mach/platform.h
> @@ -48,6 +48,9 @@ void ep93xx_register_i2s(void);
> int ep93xx_i2s_acquire(void);
> void ep93xx_i2s_release(void);
> void ep93xx_register_ac97(void);
> +void ep93xx_register_ide(void);
> +int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
> +void ep93xx_ide_release_gpio(struct platform_device *pdev);
>
> void ep93xx_init_devices(void);
> extern struct sys_timer ep93xx_timer;
next prev parent reply other threads:[~2012-06-04 5:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-12 12:10 [PATCH v3 0/3] Add PATA host controller support for Cirrus Logic EP93xx CPU Rafal Prylowski
2012-04-12 12:13 ` [PATCH v3 1/3] PATA host controller driver for ep93xx Rafal Prylowski
2012-05-22 20:05 ` Jeff Garzik
2012-04-12 12:14 ` [PATCH v3 2/3] ep93xx: IDE driver platform support code Rafal Prylowski
2012-04-12 17:09 ` H Hartley Sweeten
2012-06-04 5:00 ` Ryan Mallon [this message]
2012-04-12 12:15 ` [PATCH v3 3/3] ep93xx: Add IDE support to edb93xx boards Rafal Prylowski
2012-06-04 5:01 ` Ryan Mallon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FCC40F6.7040400@gmail.com \
--to=rmallon@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).