* [PATCH v2] ARM: at91: add support for Telit EVK GE863-PRO3
@ 2012-05-31 7:21 Fabio Porcedda
2012-06-07 13:21 ` Nicolas Ferre
0 siblings, 1 reply; 2+ messages in thread
From: Fabio Porcedda @ 2012-05-31 7:21 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
---
- changes for v2
- add empty line before the Signed-off-by line
arch/arm/boot/dts/evk_ge863_pro3.dts | 57 ++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/Makefile.boot | 1 +
2 files changed, 58 insertions(+)
create mode 100644 arch/arm/boot/dts/evk_ge863_pro3.dts
diff --git a/arch/arm/boot/dts/evk_ge863_pro3.dts b/arch/arm/boot/dts/evk_ge863_pro3.dts
new file mode 100644
index 0000000..bcd5ae1
--- /dev/null
+++ b/arch/arm/boot/dts/evk_ge863_pro3.dts
@@ -0,0 +1,57 @@
+/*
+ * evk_ge863_pro3.dts - Device Tree file for Telit EVK GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ * 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+
+/ {
+ model = "Telit EVK GE863-PRO3";
+ compatible = "telit,evk_ge863-pro3", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock at 0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <6000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial at fffff200 {
+ status = "okay";
+ };
+
+ usb1: gadget at fffa4000 {
+ atmel,vbus-gpio = <&pioC 4 0>;
+ status = "okay";
+ };
+ };
+
+
+ nand0: nand at 40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ root at 07c0000 {
+ label = "root";
+ reg = <0x7c0000 0x7840000>;
+ };
+
+ };
+ };
+};
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 9e84fe4..7bb44f0 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -16,6 +16,7 @@ endif
# Keep dtb files sorted alphabetically for each SoC
# sam9260
dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += evk_ge863_pro3.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
# sam9263
--
1.7.10
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH v2] ARM: at91: add support for Telit EVK GE863-PRO3
2012-05-31 7:21 [PATCH v2] ARM: at91: add support for Telit EVK GE863-PRO3 Fabio Porcedda
@ 2012-06-07 13:21 ` Nicolas Ferre
0 siblings, 0 replies; 2+ messages in thread
From: Nicolas Ferre @ 2012-06-07 13:21 UTC (permalink / raw)
To: linux-arm-kernel
On 05/31/2012 09:21 AM, Fabio Porcedda :
> Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
pushed in at91-3.6-dt branch on
git://github.com/at91linux/linux-at91.git
Thanks,
> ---
> - changes for v2
> - add empty line before the Signed-off-by line
>
> arch/arm/boot/dts/evk_ge863_pro3.dts | 57 ++++++++++++++++++++++++++++++++++
> arch/arm/mach-at91/Makefile.boot | 1 +
> 2 files changed, 58 insertions(+)
> create mode 100644 arch/arm/boot/dts/evk_ge863_pro3.dts
>
> diff --git a/arch/arm/boot/dts/evk_ge863_pro3.dts b/arch/arm/boot/dts/evk_ge863_pro3.dts
> new file mode 100644
> index 0000000..bcd5ae1
> --- /dev/null
> +++ b/arch/arm/boot/dts/evk_ge863_pro3.dts
> @@ -0,0 +1,57 @@
> +/*
> + * evk_ge863_pro3.dts - Device Tree file for Telit EVK GE863-PRO3
> + *
> + * Copyright (C) 2012 Telit,
> + * 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
> + *
> + * Licensed under GPLv2 or later.
> + */
> +/dts-v1/;
> +/include/ "at91sam9260.dtsi"
> +
> +/ {
> + model = "Telit EVK GE863-PRO3";
> + compatible = "telit,evk_ge863-pro3", "atmel,at91sam9260", "atmel,at91sam9";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + main_clock: clock at 0 {
> + compatible = "atmel,osc", "fixed-clock";
> + clock-frequency = <6000000>;
> + };
> + };
> +
> + ahb {
> + apb {
> + dbgu: serial at fffff200 {
> + status = "okay";
> + };
> +
> + usb1: gadget at fffa4000 {
> + atmel,vbus-gpio = <&pioC 4 0>;
> + status = "okay";
> + };
> + };
> +
> +
> + nand0: nand at 40000000 {
> + nand-bus-width = <8>;
> + nand-ecc-mode = "soft";
> + nand-on-flash-bbt;
> + status = "okay";
> +
> + root at 07c0000 {
> + label = "root";
> + reg = <0x7c0000 0x7840000>;
> + };
> +
> + };
> + };
> +};
> diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
> index 9e84fe4..7bb44f0 100644
> --- a/arch/arm/mach-at91/Makefile.boot
> +++ b/arch/arm/mach-at91/Makefile.boot
> @@ -16,6 +16,7 @@ endif
> # Keep dtb files sorted alphabetically for each SoC
> # sam9260
> dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
> +dtb-$(CONFIG_MACH_AT91SAM_DT) += evk_ge863_pro3.dtb
> dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
> dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
> # sam9263
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-06-07 13:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-05-31 7:21 [PATCH v2] ARM: at91: add support for Telit EVK GE863-PRO3 Fabio Porcedda
2012-06-07 13:21 ` Nicolas Ferre
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).