[PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level

[zumeng.chen@windriver.com (Zumeng Chen)]

? 2012?06?14? 14:44, Igor Grinberg ??:
> On 06/14/12 07:46, Zumeng Chen wrote:
>> >  ? 2012?06?13? 20:18, Hiremath, Vaibhav ??:
>>> >>  On Wed, Jun 13, 2012 at 07:14:10, Zumeng Chen wrote:
>>>> >>>  From: Zumeng Chen<zumeng.chen@windriver.com>
>>>> >>>
>>>> >>>  If we don't set proper debouce time for ads7846, then there are
>>>> >>>  flooded interrupt counters of ads7846 responding to one time
>>>> >>>  touch on screen, so the driver couldn't work well.
>>>> >>>
>>>> >>>  And since most OMAP3 series boards pass NULL pointer of board_pdata
>>>> >>>  to omap_ads7846_init, so it's more proper to set it in driver level
>>>> >>>  after having gpio_request done.
>>>> >>>
>>>> >>>  This patch has been validated on 3530evm.
>>>> >>>
>>>> >>>  Signed-off-by: Zumeng Chen<zumeng.chen@windriver.com>
>>>> >>>  Signed-off-by: Syed Mohammed Khasim<khasim@ti.com>
>>>> >>>  ---
>>>> >>>     drivers/input/touchscreen/ads7846.c |    4 ++++
>>>> >>>     1 files changed, 4 insertions(+), 0 deletions(-)
>>>> >>>
>>>> >>>  diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
>>>> >>>  index f02028e..459ff29 100644
>>>> >>>  --- a/drivers/input/touchscreen/ads7846.c
>>>> >>>  +++ b/drivers/input/touchscreen/ads7846.c
>>>> >>>  @@ -980,6 +980,10 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
>>>> >>>             }
>>>> >>>
>>>> >>>             ts->gpio_pendown = pdata->gpio_pendown;
>>>> >>>  +#ifdef CONFIG_ARCH_OMAP3
>>>> >>>  +        /* 310 means about 10 microsecond for omap3 */
>>>> >>>  +        gpio_set_debounce(pdata->gpio_pendown, 310);
>>>> >>>  +#endif
>>>> >>>
>>> >>  Zumeng,
>>> >>
>>> >>  With my sign-off you are changing the original code, that too
>>> >>  without my sign-off and ack.
>>> >>  I wouldn't mind you to submit patches from my tree, but the expectation is
>>> >>  if you are changing the original code, it should be under your sign-off.
>> >  Thanks, good to learn. I'll remove in next time.
>>> >>  Coming to the patch, #ifdef in driver is not recommended, and this 10msec
>>> >>  delay is specific to OMAP GPIO and driver should not be aware of this,
>>> >>  that's where you will find the original patch handling it in board file.
>> >  According to the git blame of the board-omap3evm.c I think
>> >  96974a24 did a good thing to all the related codes for omap3
>> >  boards. So I think we can call board and driver as BSP level:-)
>> >  
>> >  If #ifdef in driver can save many codes, I guess it's deserved.
> No, platform/board specific ifdefs in the generic driver code are never
> deserved.
> How about the attached patch, does it fix the problem for you?
Sorry Igor, I just read your patch, yes, most are there, and we
just have to set get_pendown_state as you early said. Really
*thanks* for your drive :)

Regards,
Zumeng
> -- Regards, Igor.
> ads7846.patch
>
>
> diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
> index 1706ebc..c187586 100644
> --- a/arch/arm/mach-omap2/common-board-devices.c
> +++ b/arch/arm/mach-omap2/common-board-devices.c
> @@ -63,28 +63,30 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
>   	struct spi_board_info *spi_bi =&ads7846_spi_board_info;
>   	int err;
>
> -	if (board_pdata&&  board_pdata->get_pendown_state) {
> -		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
> -		if (err) {
> -			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
> -			return;
> -		}
> -		gpio_export(gpio_pendown, 0);
> -
> -		if (gpio_debounce)
> -			gpio_set_debounce(gpio_pendown, gpio_debounce);
> +	err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
> +	if (err) {
> +		pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
> +		return;
>   	}
>   	
> +	if (gpio_debounce)
> +		gpio_set_debounce(gpio_pendown, gpio_debounce);
> +
>   	spi_bi->bus_num	= bus_num;
>   	spi_bi->irq	= gpio_to_irq(gpio_pendown);
>
>   	if (board_pdata) {
>   		board_pdata->gpio_pendown = gpio_pendown;
>   		spi_bi->platform_data = board_pdata;
> +		if (board_pdata->get_pendown_state)
> +			gpio_export(gpio_pendown, 0);
>   	} else {
>   		ads7846_config.gpio_pendown = gpio_pendown;
>   	}
>
> +	if (!board_pdata || (board_pdata&&  !board_pdata->get_pendown_state))
> +		gpio_free(gpio_pendown);
> +
>   	spi_register_board_info(&ads7846_spi_board_info, 1);
>   }
>   #else

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120614/23df068c/attachment-0001.html>