From mboxrd@z Thu Jan 1 00:00:00 1970 From: zumeng.chen@windriver.com (Zumeng Chen) Date: Thu, 14 Jun 2012 15:08:10 +0800 Subject: [PATCH V2 5/5] Input: ads7846: set proper debounce time in driver level In-Reply-To: <4FD98856.8070601@compulab.co.il> References: <1339551850-20827-1-git-send-email-zumeng.chen@gmail.com> <1339551850-20827-6-git-send-email-zumeng.chen@gmail.com> <79CD15C6BA57404B839C016229A409A83EA4F07F@DBDE01.ent.ti.com> <4FD96CBF.5040106@windriver.com> <4FD98856.8070601@compulab.co.il> Message-ID: <4FD98DDA.9050806@windriver.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org ? 2012?06?14? 14:44, Igor Grinberg ??: > On 06/14/12 07:46, Zumeng Chen wrote: >> > ? 2012?06?13? 20:18, Hiremath, Vaibhav ??: >>> >> On Wed, Jun 13, 2012 at 07:14:10, Zumeng Chen wrote: >>>> >>> From: Zumeng Chen >>>> >>> >>>> >>> If we don't set proper debouce time for ads7846, then there are >>>> >>> flooded interrupt counters of ads7846 responding to one time >>>> >>> touch on screen, so the driver couldn't work well. >>>> >>> >>>> >>> And since most OMAP3 series boards pass NULL pointer of board_pdata >>>> >>> to omap_ads7846_init, so it's more proper to set it in driver level >>>> >>> after having gpio_request done. >>>> >>> >>>> >>> This patch has been validated on 3530evm. >>>> >>> >>>> >>> Signed-off-by: Zumeng Chen >>>> >>> Signed-off-by: Syed Mohammed Khasim >>>> >>> --- >>>> >>> drivers/input/touchscreen/ads7846.c | 4 ++++ >>>> >>> 1 files changed, 4 insertions(+), 0 deletions(-) >>>> >>> >>>> >>> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c >>>> >>> index f02028e..459ff29 100644 >>>> >>> --- a/drivers/input/touchscreen/ads7846.c >>>> >>> +++ b/drivers/input/touchscreen/ads7846.c >>>> >>> @@ -980,6 +980,10 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784 >>>> >>> } >>>> >>> >>>> >>> ts->gpio_pendown = pdata->gpio_pendown; >>>> >>> +#ifdef CONFIG_ARCH_OMAP3 >>>> >>> + /* 310 means about 10 microsecond for omap3 */ >>>> >>> + gpio_set_debounce(pdata->gpio_pendown, 310); >>>> >>> +#endif >>>> >>> >>> >> Zumeng, >>> >> >>> >> With my sign-off you are changing the original code, that too >>> >> without my sign-off and ack. >>> >> I wouldn't mind you to submit patches from my tree, but the expectation is >>> >> if you are changing the original code, it should be under your sign-off. >> > Thanks, good to learn. I'll remove in next time. >>> >> Coming to the patch, #ifdef in driver is not recommended, and this 10msec >>> >> delay is specific to OMAP GPIO and driver should not be aware of this, >>> >> that's where you will find the original patch handling it in board file. >> > According to the git blame of the board-omap3evm.c I think >> > 96974a24 did a good thing to all the related codes for omap3 >> > boards. So I think we can call board and driver as BSP level:-) >> > >> > If #ifdef in driver can save many codes, I guess it's deserved. > No, platform/board specific ifdefs in the generic driver code are never > deserved. > How about the attached patch, does it fix the problem for you? Sorry Igor, I just read your patch, yes, most are there, and we just have to set get_pendown_state as you early said. Really *thanks* for your drive :) Regards, Zumeng > -- Regards, Igor. > ads7846.patch > > > diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c > index 1706ebc..c187586 100644 > --- a/arch/arm/mach-omap2/common-board-devices.c > +++ b/arch/arm/mach-omap2/common-board-devices.c > @@ -63,28 +63,30 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, > struct spi_board_info *spi_bi =&ads7846_spi_board_info; > int err; > > - if (board_pdata&& board_pdata->get_pendown_state) { > - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); > - if (err) { > - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); > - return; > - } > - gpio_export(gpio_pendown, 0); > - > - if (gpio_debounce) > - gpio_set_debounce(gpio_pendown, gpio_debounce); > + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); > + if (err) { > + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); > + return; > } > > + if (gpio_debounce) > + gpio_set_debounce(gpio_pendown, gpio_debounce); > + > spi_bi->bus_num = bus_num; > spi_bi->irq = gpio_to_irq(gpio_pendown); > > if (board_pdata) { > board_pdata->gpio_pendown = gpio_pendown; > spi_bi->platform_data = board_pdata; > + if (board_pdata->get_pendown_state) > + gpio_export(gpio_pendown, 0); > } else { > ads7846_config.gpio_pendown = gpio_pendown; > } > > + if (!board_pdata || (board_pdata&& !board_pdata->get_pendown_state)) > + gpio_free(gpio_pendown); > + > spi_register_board_info(&ads7846_spi_board_info, 1); > } > #else -------------- next part -------------- An HTML attachment was scrubbed... URL: