From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7] usb: chipidea: permit driver bindings pass phy pointer
Date: Thu, 21 Jun 2012 22:42:52 +0200 [thread overview]
Message-ID: <4FE3874C.2040504@pengutronix.de> (raw)
In-Reply-To: <1340268682-14654-1-git-send-email-richard.zhao@freescale.com>
On 06/21/2012 10:51 AM, Richard Zhao wrote:
> Sometimes, the driver bindings may know what phy they use.
> For example, when using device tree, the usb controller may have a
> phandler pointing to usb phy.
Remove the module doesn't remove the platform device. A subsequent modprobe fails with:
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:529 sysfs_add_one+0x8c/0xbc()
sysfs: cannot create duplicate filename '/devices/80080000.ahb/80080000.usb/ci_hdrc.0'
Modules linked in: ci13xxx_imx(+) ci_hdrc udc_core [last unloaded: ci13xxx_imx]
[<c000e6c8>] (unwind_backtrace+0x0/0xf0) from [<c0015c70>] (warn_slowpath_common+0x4c/0x64)
[<c0015c70>] (warn_slowpath_common+0x4c/0x64) from [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40)
[<c0015d1c>] (warn_slowpath_fmt+0x30/0x40) from [<c00dbbbc>] (sysfs_add_one+0x8c/0xbc)
[<c00dbbbc>] (sysfs_add_one+0x8c/0xbc) from [<c00dbd2c>] (create_dir+0x60/0xc0)
[<c00dbd2c>] (create_dir+0x60/0xc0) from [<c00dc08c>] (sysfs_create_dir+0x64/0xa8)
[<c00dc08c>] (sysfs_create_dir+0x64/0xa8) from [<c0151f28>] (kobject_add_internal+0xa4/0x1e8)
[<c0151f28>] (kobject_add_internal+0xa4/0x1e8) from [<c0152434>] (kobject_add+0x50/0x98)
[<c0152434>] (kobject_add+0x50/0x98) from [<c0187fe4>] (device_add+0xb8/0x358)
[<c0187fe4>] (device_add+0xb8/0x358) from [<c018b76c>] (platform_device_add+0xf8/0x1a0)
[<c018b76c>] (platform_device_add+0xf8/0x1a0) from [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc])
[<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc]) from [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx])
[<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx]) from [<c018b378>] (platform_drv_probe+0x14/0x18)
[<c018b378>] (platform_drv_probe+0x14/0x18) from [<c018a230>] (really_probe+0x68/0x1e0)
[<c018a230>] (really_probe+0x68/0x1e0) from [<c018a530>] (__driver_attach+0x8c/0x90)
[<c018a530>] (__driver_attach+0x8c/0x90) from [<c0188c0c>] (bus_for_each_dev+0x54/0x7c)
[<c0188c0c>] (bus_for_each_dev+0x54/0x7c) from [<c0189b74>] (bus_add_driver+0x17c/0x248)
[<c0189b74>] (bus_add_driver+0x17c/0x248) from [<c018a7e4>] (driver_register+0x78/0x12c)
[<c018a7e4>] (driver_register+0x78/0x12c) from [<c00086c4>] (do_one_initcall+0x30/0x168)
[<c00086c4>] (do_one_initcall+0x30/0x168) from [<c004c824>] (sys_init_module+0x74/0x198)
[<c004c824>] (sys_init_module+0x74/0x198) from [<c0009260>] (ret_fast_syscall+0x0/0x2c)
---[ end trace e152599aa12f31d8 ]---
------------[ cut here ]------------
WARNING: at lib/kobject.c:196 kobject_add_internal+0x1cc/0x1e8()
kobject_add_internal failed for ci_hdrc.0 with -EEXIST, don't try to register things with the same name in the same directory.
Modules linked in: ci13xxx_imx(+) ci_hdrc udc_core [last unloaded: ci13xxx_imx]
[<c000e6c8>] (unwind_backtrace+0x0/0xf0) from [<c0015c70>] (warn_slowpath_common+0x4c/0x64)
[<c0015c70>] (warn_slowpath_common+0x4c/0x64) from [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40)
[<c0015d1c>] (warn_slowpath_fmt+0x30/0x40) from [<c0152050>] (kobject_add_internal+0x1cc/0x1e8)
[<c0152050>] (kobject_add_internal+0x1cc/0x1e8) from [<c0152434>] (kobject_add+0x50/0x98)
[<c0152434>] (kobject_add+0x50/0x98) from [<c0187fe4>] (device_add+0xb8/0x358)
[<c0187fe4>] (device_add+0xb8/0x358) from [<c018b76c>] (platform_device_add+0xf8/0x1a0)
[<c018b76c>] (platform_device_add+0xf8/0x1a0) from [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc])
[<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc]) from [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx])
[<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx]) from [<c018b378>] (platform_drv_probe+0x14/0x18)
[<c018b378>] (platform_drv_probe+0x14/0x18) from [<c018a230>] (really_probe+0x68/0x1e0)
[<c018a230>] (really_probe+0x68/0x1e0) from [<c018a530>] (__driver_attach+0x8c/0x90)
[<c018a530>] (__driver_attach+0x8c/0x90) from [<c0188c0c>] (bus_for_each_dev+0x54/0x7c)
[<c0188c0c>] (bus_for_each_dev+0x54/0x7c) from [<c0189b74>] (bus_add_driver+0x17c/0x248)
[<c0189b74>] (bus_add_driver+0x17c/0x248) from [<c018a7e4>] (driver_register+0x78/0x12c)
[<c018a7e4>] (driver_register+0x78/0x12c) from [<c00086c4>] (do_one_initcall+0x30/0x168)
[<c00086c4>] (do_one_initcall+0x30/0x168) from [<c004c824>] (sys_init_module+0x74/0x198)
[<c004c824>] (sys_init_module+0x74/0x198) from [<c0009260>] (ret_fast_syscall+0x0/0x2c)
---[ end trace e152599aa12f31d9 ]---
imx_usb 80080000.usb: Can't register ci_hdrc platform device, err=-17
imx_usb: probe of 80080000.usb failed with error -17
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120621/a8372925/attachment.sig>
next prev parent reply other threads:[~2012-06-21 20:42 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-21 6:41 [PATCH v6 00/14] add imx usb driver based on Greg next tree Richard Zhao
2012-06-21 6:41 ` [PATCH v6 01/14] usb: chipidea: remove unneeded NULL check Richard Zhao
2012-06-21 6:41 ` [PATCH v6 02/14] usb: chipidea: drop useless arch-check Richard Zhao
2012-06-21 6:41 ` [PATCH v6 03/14] usb: chipidea: msm: add missing section annotation Richard Zhao
2012-06-21 6:41 ` [PATCH v6 04/14] usb: chipidea: msm: add remove method Richard Zhao
2012-06-21 6:41 ` [PATCH v6 05/14] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data Richard Zhao
2012-06-21 6:41 ` [PATCH v6 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci Richard Zhao
2012-06-21 6:41 ` [PATCH v6 07/14] USB: Chipidea: add unified ci13xxx_{add, remove}_device for platform drivers Richard Zhao
2012-06-25 3:08 ` [PATCH v6 07/14] USB: Chipidea: add unified ci13xxx_{add,remove}_device " Richard Zhao
2012-06-21 6:41 ` [PATCH v6 08/14] USB: Chipidea: add ci13xxx device id management Richard Zhao
2012-06-21 6:41 ` [PATCH v6 09/14] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig Richard Zhao
2012-06-21 6:41 ` [PATCH v6 10/14] usb: otg: add notify_connect/notify_disconnect callback Richard Zhao
2012-06-21 6:41 ` [PATCH v6 11/14] USB: notify phy when root hub port connect change Richard Zhao
2012-06-21 6:41 ` [PATCH v6 12/14] usb: chipidea: permit driver bindings pass phy pointer Richard Zhao
2012-06-21 7:18 ` Marc Kleine-Budde
2012-06-21 8:38 ` Richard Zhao
2012-06-21 8:51 ` [PATCH v7] " Richard Zhao
2012-06-21 20:42 ` Marc Kleine-Budde [this message]
2012-06-25 3:07 ` Richard Zhao
2012-06-21 6:41 ` [PATCH v6 13/14] usb: otg: add basic mxs phy driver support Richard Zhao
2012-06-26 9:15 ` Alexander Shishkin
2012-06-27 6:47 ` Richard Zhao
2012-06-21 6:41 ` [PATCH v6 14/14] usb: chipidea: add imx platform driver Richard Zhao
2012-06-21 15:23 ` Richard Zhao
2012-06-21 7:24 ` [PATCH v6 00/14] add imx usb driver based on Greg next tree Marc Kleine-Budde
2012-06-21 8:52 ` Richard Zhao
2012-06-21 9:10 ` Marc Kleine-Budde
2012-06-25 3:00 ` Richard Zhao
2012-06-25 16:18 ` Fabio Estevam
2012-06-26 2:37 ` Shawn Guo
2012-06-26 12:25 ` Marek Vasut
2012-07-30 22:27 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FE3874C.2040504@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).