[PATCH v3 3/3] mtd: gpmi: change the code for clocks

[jason77.wang@gmail.com (Hui Wang)]

Huang Shijie wrote:
> The gpmi nand driver may needs several clocks(MX6Q needs five clocks).
>
> In the old clock framework, all these clocks are chained together,
> all you need is to manipulate the first clock.
>
> But the kernel uses the common clk framework now, which forces us to
> get the clocks one by one. When we use them, we have to enable them
> one by one too.
>
> Signed-off-by: Huang Shijie <shijie8@gmail.com>
> ---
>  arch/arm/boot/dts/imx6q-arm2.dts       |    2 +-
>  drivers/mtd/nand/gpmi-nand/gpmi-lib.c  |   43 ++++++++++++++---
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c |   82 ++++++++++++++++++++++++++++----
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.h |    3 +-
>  4 files changed, 111 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
> index 14e72e2..027a2f8 100644
> --- a/arch/arm/boot/dts/imx6q-arm2.dts
> +++ b/arch/arm/boot/dts/imx6q-arm2.dts
> @@ -25,7 +25,7 @@
>  		gpmi-nand at 00112000 {
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&pinctrl_gpmi_nand_1>;
> -			status = "disabled"; /* gpmi nand conflicts with SD */
> +			status = "okay"; /* gpmi nand conflicts with SD */
>  		};
>  
>  		aips-bus at 02100000 { /* AIPS2 */
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> index a1f4332..c3778c0 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> @@ -124,12 +124,40 @@ error:
>  	return -ETIMEDOUT;
>  }
>  
> +static int __gpmi_enable_clk(struct gpmi_nand_data *this, bool v)
> +{
> +	struct clk *clk;
> +	int ret;
> +	int i;
> +
> +	for (i = 0; i < GPMI_CLK_MAX; i++) {
> +		clk = this->resources.clock[i];
> +		if (!clk)
> +			break;
> +
> +		if (v) {
> +			ret = clk_prepare_enable(clk);
> +			if (ret)
> +				goto err_clk;
> +		} else {
> +			clk_disable_unprepare(clk);
> +		}
> +	}
> +	return 0;
> +
> +err_clk:
>   
Doesn't this design introduce clk_enalbe/disable un-balance problems?

Suppose you successfully enabled 1st and 2nd clocks, and failed at the 
third clock, this function will return, then the caller function will 
check the return value and call

__gpmi_enable_clk(this, 0), in this function, it will unconditionally disable all five clocks.


Regards,
Hui.

> +	return ret;
> +}
> +
>